From: "Eugene Prokopiev" <enp@altlinux.org> To: hardware@lists.altlinux.org, shigorin@gmail.com, Hardware@lists.altlinux.org Subject: Re: [Hardware] softraid resync problems Date: Sun, 23 Nov 2008 21:02:12 +0300 Message-ID: <f7a739430811231002p5a4075b6g35b9f1c28d57a653@mail.gmail.com> (raw) In-Reply-To: <20081119130748.GO1897@osdn.org.ua> 19.11.08, Michael Shigorin написал(а): > On Tue, Nov 18, 2008 at 03:54:08PM +0300, Eugene Prokopiev wrote: > > Nov 18 16:36:53 my-desktop kernel: ata1.00: exception Emask 0x0 > > SAct 0x0 SErr 0x0 action 0x2 frozen > > Nov 18 16:36:53 my-desktop kernel: ata1.00: cmd > > ca/00:08:87:38:23/00:00:00:00:00/e0 tag 0 dma 4096 out > > Nov 18 16:36:53 my-desktop kernel: res > > 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) > > Nov 18 16:36:53 my-desktop kernel: ata1.00: status: { DRDY } > > Nov 18 16:36:53 my-desktop kernel: ata1: soft resetting link > > Nov 18 16:36:53 my-desktop kernel: ata1.00: configured for UDMA/100 > > Nov 18 16:36:53 my-desktop kernel: ata1: EH complete > > > > > Устройство sda пора выкидывать? > > Похоже; глянь на всякий smartctl -d ata -a /dev/sda ещё # smartctl -d ata -a /dev/sda -s on smartctl version 5.38 [i586-alt-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.9 family Device Model: ST3120814A Serial Number: 5LS00NJ3 Firmware Version: 2AAA User Capacity: 120,033,041,920 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Sun Nov 23 20:48:29 2008 MSK SMART support is: Available - device has SMART capability. SMART support is: Disabled === START OF ENABLE/DISABLE COMMANDS SECTION === SMART Enabled. === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 51) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 068 042 006 Pre-fail Always - 221193856 3 Spin_Up_Time 0x0003 100 098 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 166 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 1 7 Seek_Error_Rate 0x000f 090 060 030 Pre-fail Always - 952819715 9 Power_On_Hours 0x0032 077 077 000 Old_age Always - 20608 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 292 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 090 090 000 Old_age Always - 10 190 Airflow_Temperature_Cel 0x0022 054 035 045 Old_age Always In_the_past 46 (255 255 47 46) 194 Temperature_Celsius 0x0022 046 065 000 Old_age Always - 46 (0 20 0 0) 195 Hardware_ECC_Recovered 0x001a 057 049 000 Old_age Always - 16983244 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 19830 - # 2 Short offline Completed without error 00% 19806 - # 3 Short offline Completed without error 00% 19782 - # 4 Short offline Completed without error 00% 19759 - # 5 Extended offline Completed without error 00% 19738 - # 6 Short offline Completed without error 00% 19735 - # 7 Short offline Completed without error 00% 19711 - # 8 Short offline Completed without error 00% 19688 - # 9 Short offline Completed without error 00% 19664 - #10 Short offline Completed without error 00% 19641 - #11 Short offline Completed without error 00% 19617 - #12 Short offline Completed without error 00% 19593 - #13 Extended offline Completed without error 00% 19573 - #14 Short offline Completed without error 00% 19570 - #15 Short offline Completed without error 00% 19546 - #16 Short offline Completed without error 00% 19522 - #17 Short offline Completed without error 00% 19499 - #18 Short offline Completed without error 00% 19476 - #19 Short offline Completed without error 00% 19452 - #20 Extended offline Completed without error 00% 19408 - #21 Short offline Completed without error 00% 19405 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. > Диску небось порядка трёх лет? Где-то так, если не больше :) Впрочем, компьютер перетряхнули/почистили/помазали и он перестал заниматься глупостями ... -- С уважением, Прокопьев Евгений
next prev parent reply other threads:[~2008-11-23 18:02 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2008-11-18 12:54 Eugene Prokopiev 2008-11-19 13:07 ` Michael Shigorin 2008-11-23 18:02 ` Eugene Prokopiev [this message] 2008-11-27 21:40 ` Michael Shigorin
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=f7a739430811231002p5a4075b6g35b9f1c28d57a653@mail.gmail.com \ --to=enp@altlinux.org \ --cc=hardware@lists.altlinux.org \ --cc=shigorin@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux hardware support This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \ hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org public-inbox-index hardware Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.hardware AGPL code for this site: git clone https://public-inbox.org/public-inbox.git