From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <glah-hardware@m.gmane.org>
X-Injected-Via-Gmane: http://gmane.org/
To: hardware@lists.altlinux.org
From: Genix <genix@list.ru>
Date: Fri, 12 Jan 2007 09:38:00 +0300
Message-ID: <eo7ac2$hqf$1@sea.gmane.org>
Mime-Version: 1.0
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 8bit
X-Complaints-To: usenet@sea.gmane.org
X-Gmane-NNTP-Posting-Host: 213.80.135.130
User-Agent: Thunderbird 1.5.0.8 (X11/20061205)
Sender: news <news@sea.gmane.org>
Subject: [Hardware] =?utf-8?b?0JHQvtC70YzQvdCw0Y8gRmxhc2g=?=
X-BeenThere: hardware@lists.altlinux.org
X-Mailman-Version: 2.1.9rc1
Precedence: list
Reply-To: hardware@altlinux.ru
List-Id: ALT Linux hardware support <hardware.lists.altlinux.org>
List-Unsubscribe: <https://lists.altlinux.org/mailman/listinfo/hardware>,
	<mailto:hardware-request@lists.altlinux.org?subject=unsubscribe>
List-Archive: <http://lists.altlinux.org/pipermail/hardware>
List-Post: <mailto:hardware@lists.altlinux.org>
List-Help: <mailto:hardware-request@lists.altlinux.org?subject=help>
List-Subscribe: <https://lists.altlinux.org/mailman/listinfo/hardware>,
	<mailto:hardware-request@lists.altlinux.org?subject=subscribe>
X-List-Received-Date: Fri, 12 Jan 2007 06:38:08 -0000
Archived-At: <http://lore.altlinux.org/hardware/eo7ac2$hqf$1@sea.gmane.org/>
List-Archive: <http://lore.altlinux.org/hardware/>
List-Post: <mailto:hardware@altlinux.ru>

Приветствую!

Подскажите. Есть такая флешка:

usb-storage: waiting for device to settle before scanning
   Vendor: SKYMEDI   Model: USB Drive         Rev: 1.0
   Type:   Direct-Access                      ANSI SCSI revision: 02
sdf : very big device. try to use READ CAPACITY(16).
sdf : READ CAPACITY(16) failed.
sdf : status=0, message=00, host=5, driver=00
sdf : use 0xffffffff as device size
SCSI device sdf: 4294967296 512-byte hdwr sectors (2199023 MB)
sdf: Write Protect is off
sdf: Mode Sense: 03 00 00 00
sdf: assuming drive cache: write through
sdf : very big device. try to use READ CAPACITY(16).
sdf : READ CAPACITY(16) failed.
sdf : status=0, message=00, host=5, driver=00
sdf : use 0xffffffff as device size
SCSI device sdf: 4294967296 512-byte hdwr sectors (2199023 MB)
sdf: Write Protect is off
sdf: Mode Sense: 03 00 00 00
sdf: assuming drive cache: write through
  sdf: unknown partition table

После чего попытки открыть fdisk'ом дают только ошибку:

# fdisk /dev/sdf
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF 
disklabel
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that, of course, the previous
content won't be recoverable.

You must set cylinders.
You can do this from the extra functions menu.
Warning: invalid flag 0x0000 of partition table 4 will be corrected by 
w(rite)

Command (m for help): q

root@genix:~# fdisk /dev/sdf
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF 
disklabel
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that, of course, the previous
content won't be recoverable.

You must set cylinders.
You can do this from the extra functions menu.
Warning: invalid flag 0x0000 of partition table 4 will be corrected by 
w(rite)

Command (m for help): w
The partition table has been altered!

Calling ioctl() to re-read partition table.

WARNING: Re-reading the partition table failed with error 16: Устройство 
или ресурс занято.
The kernel still uses the old table.
The new table will be used at the next reboot.

Error closing file

При попытке создать раздел в fdisk выдает:

You must set cylinders.
You can do this from the extra functions menu.

Вопрос:

Можно ли оживить эту флешку?


-- 
У каждого в башке свои тараканы...