* [Hardware] Fn+...
@ 2008-12-26 10:51 Alex
2008-12-26 11:28 ` Michail Yakushin
0 siblings, 1 reply; 6+ messages in thread
From: Alex @ 2008-12-26 10:51 UTC (permalink / raw)
To: hardware
# acpi_listen -->после ввода команды и последующего нажатия клавиш, никакие коды не выдаются, в консоли тупо отображаются нажимаемые клавиши, как это происходит при обычном наборе команды. aspi установлен.
$ xev --->не реагирует на нажатие Fn при любой выбранной клавиатуре. На остальные клавиши реагирует и выдает соответствующие коды.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Hardware] Fn+...
2008-12-26 10:51 [Hardware] Fn+ Alex
@ 2008-12-26 11:28 ` Michail Yakushin
2008-12-26 12:08 ` Valery V. Inozemtsev
0 siblings, 1 reply; 6+ messages in thread
From: Michail Yakushin @ 2008-12-26 11:28 UTC (permalink / raw)
To: hardware
Alex wrote:
> # acpi_listen -->после ввода команды и последующего нажатия клавиш, никакие коды не выдаются, в консоли тупо отображаются нажимаемые клавиши, как это происходит при обычном наборе команды. aspi установлен.
> $ xev --->не реагирует на нажатие Fn при любой выбранной клавиатуре. На остальные клавиши реагирует и выдает соответствующие коды.
Fn сам по себе ничго не должен посылать, должен посылать fn+что-то
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Hardware] Fn+...
2008-12-26 11:28 ` Michail Yakushin
@ 2008-12-26 12:08 ` Valery V. Inozemtsev
2008-12-26 12:42 ` Michail Yakushin
0 siblings, 1 reply; 6+ messages in thread
From: Valery V. Inozemtsev @ 2008-12-26 12:08 UTC (permalink / raw)
To: hardware
[-- Attachment #1: Type: text/plain, Size: 800 bytes --]
On Friday 26 December 2008 14:28:30 Michail Yakushin wrote:
> Alex wrote:
> > # acpi_listen -->после ввода команды и последующего нажатия клавиш,
> > никакие коды не выдаются, в консоли тупо отображаются нажимаемые клавиши,
> > как это происходит при обычном наборе команды. aspi установлен. $ xev
> > --->не реагирует на нажатие Fn при любой выбранной клавиатуре. На
> > остальные клавиши реагирует и выдает соответствующие коды.
>
> Fn сам по себе ничго не должен посылать, должен посылать fn+что-то
signal sender=:1.0 -> dest=(null destination)
path=/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input;
interface=org.freedesktop.Hal.Device; member=Condition
string "ButtonPressed"
string "wake-up"
догадайся с одного раза что я нажал :)
--
Valery V. Inozemtsev
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Hardware] Fn+...
2008-12-26 12:08 ` Valery V. Inozemtsev
@ 2008-12-26 12:42 ` Michail Yakushin
2008-12-26 12:50 ` Valery V. Inozemtsev
0 siblings, 1 reply; 6+ messages in thread
From: Michail Yakushin @ 2008-12-26 12:42 UTC (permalink / raw)
To: hardware
Valery V. Inozemtsev wrote:
> On Friday 26 December 2008 14:28:30 Michail Yakushin wrote:
>> Alex wrote:
>>> # acpi_listen -->после ввода команды и последующего нажатия клавиш,
>>> никакие коды не выдаются, в консоли тупо отображаются нажимаемые клавиши,
>>> как это происходит при обычном наборе команды. aspi установлен. $ xev
>>> --->не реагирует на нажатие Fn при любой выбранной клавиатуре. На
>>> остальные клавиши реагирует и выдает соответствующие коды.
>> Fn сам по себе ничго не должен посылать, должен посылать fn+что-то
> signal sender=:1.0 -> dest=(null destination)
> path=/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input;
> interface=org.freedesktop.Hal.Device; member=Condition
> string "ButtonPressed"
> string "wake-up"
>
> догадайся с одного раза что я нажал :)
Fn??? гыы
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Hardware] Fn+...
2008-12-26 12:42 ` Michail Yakushin
@ 2008-12-26 12:50 ` Valery V. Inozemtsev
2008-12-26 13:20 ` Michail Yakushin
0 siblings, 1 reply; 6+ messages in thread
From: Valery V. Inozemtsev @ 2008-12-26 12:50 UTC (permalink / raw)
To: hardware
[-- Attachment #1: Type: text/plain, Size: 991 bytes --]
On Friday 26 December 2008 15:42:38 Michail Yakushin wrote:
> Valery V. Inozemtsev wrote:
> > On Friday 26 December 2008 14:28:30 Michail Yakushin wrote:
> >> Alex wrote:
> >>> # acpi_listen -->после ввода команды и последующего нажатия клавиш,
> >>> никакие коды не выдаются, в консоли тупо отображаются нажимаемые
> >>> клавиши, как это происходит при обычном наборе команды. aspi
> >>> установлен. $ xev --->не реагирует на нажатие Fn при любой выбранной
> >>> клавиатуре. На остальные клавиши реагирует и выдает соответствующие
> >>> коды.
> >>
> >> Fn сам по себе ничго не должен посылать, должен посылать fn+что-то
> >
> > signal sender=:1.0 -> dest=(null destination)
> > path=/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicalde
> >v_input; interface=org.freedesktop.Hal.Device; member=Condition
> > string "ButtonPressed"
> > string "wake-up"
> >
> > догадайся с одного раза что я нажал :)
>
> Fn??? гыы
а ты говоришь не посылает...
--
Valery V. Inozemtsev
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Hardware] Fn+...
2008-12-26 12:50 ` Valery V. Inozemtsev
@ 2008-12-26 13:20 ` Michail Yakushin
0 siblings, 0 replies; 6+ messages in thread
From: Michail Yakushin @ 2008-12-26 13:20 UTC (permalink / raw)
To: hardware
Valery V. Inozemtsev wrote:
> On Friday 26 December 2008 15:42:38 Michail Yakushin wrote:
>> Valery V. Inozemtsev wrote:
>>> On Friday 26 December 2008 14:28:30 Michail Yakushin wrote:
>>>> Alex wrote:
>>>>> # acpi_listen -->после ввода команды и последующего нажатия клавиш,
>>>>> никакие коды не выдаются, в консоли тупо отображаются нажимаемые
>>>>> клавиши, как это происходит при обычном наборе команды. aspi
>>>>> установлен. $ xev --->не реагирует на нажатие Fn при любой выбранной
>>>>> клавиатуре. На остальные клавиши реагирует и выдает соответствующие
>>>>> коды.
>>>> Fn сам по себе ничго не должен посылать, должен посылать fn+что-то
>>> signal sender=:1.0 -> dest=(null destination)
>>> path=/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicalde
>>> v_input; interface=org.freedesktop.Hal.Device; member=Condition
>>> string "ButtonPressed"
>>> string "wake-up"
>>>
>>> догадайся с одного раза что я нажал :)
>> Fn??? гыы
>
> а ты говоришь не посылает...
Значит когда как. Я имел в виду что обработка драйвером кнопки например
sleep это не получение fn и получение f1 а именно получение какого-то
отдельного кода. и получение fn не обязательно
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2008-12-26 13:20 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-12-26 10:51 [Hardware] Fn+ Alex
2008-12-26 11:28 ` Michail Yakushin
2008-12-26 12:08 ` Valery V. Inozemtsev
2008-12-26 12:42 ` Michail Yakushin
2008-12-26 12:50 ` Valery V. Inozemtsev
2008-12-26 13:20 ` Michail Yakushin
ALT Linux hardware support
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \
hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org
public-inbox-index hardware
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.hardware
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git