From: "Сергей Кудрявцев" <olvin@rambler.ru> To: hardware@lists.altlinux.org Subject: [Hardware] Загрузка модулей при старте системы Date: Thu, 27 Nov 2014 11:08:19 +0300 Message-ID: <5476DBF3.6010507@rambler.ru> (raw) Привет всем. Есть ноутбук HP Pavilion TouchSmart e010-er. В нём Ethernet-адаптер, lspci: 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 07) Вроде бы подходит модуль r8169, когда гружу его вручную, всё нормально: [ 1119.230502] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1119.230616] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1119.231316] r8169 0000:01:00.0: irq 82 for MSI/MSI-X [ 1119.232285] r8169 0000:01:00.0 eth0: RTL8106e at 0xffffc9000537e000, 2c:44:fd:b9:0f:81, XID 04900000 IRQ 82 [ 1119.354177] systemd-udevd[3802]: renamed network interface eth0 to eth1 [ 1119.630630] r8169 0000:01:00.0 eth1: link down [ 1119.630810] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready Добавил в /etc/modules-load.d файл r8169.conf с одной строчкой "r8169", однако при старте системы по lsmod этого модуля нет и, соответственно, ip a не показывает нужного интерфейса. В логах с момента загрузки системы про этот модуль ничего. Загрузка вручную - интерфейс снова есть. В том же каталоге есть spice-vdagentd.conf для модуля uinput, для него lsmod | grep uinput: uinput 17643 0 Что не так? Как правильно? С уважением, Серегей Кудрявцев.
next reply other threads:[~2014-11-27 8:08 UTC|newest] Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-11-27 8:08 Сергей Кудрявцев [this message] 2014-12-22 16:06 ` Michael Shigorin 2014-12-23 9:01 ` Сергей Кудрявцев
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=5476DBF3.6010507@rambler.ru \ --to=olvin@rambler.ru \ --cc=hardware@lists.altlinux.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux hardware support This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \ hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org public-inbox-index hardware Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.hardware AGPL code for this site: git clone https://public-inbox.org/public-inbox.git