* [Hardware] Лишние модули в initrd - последствия переезда системы на другую машину
@ 2009-03-04 8:47 Motsyo Gennadi aka Drool
2009-03-04 10:03 ` Motsyo Gennadi aka Drool
0 siblings, 1 reply; 2+ messages in thread
From: Motsyo Gennadi aka Drool @ 2009-03-04 8:47 UTC (permalink / raw)
To: ALT Linux Hardware
Приветствую всех.
Перенес систему с одной машины на другую. Все поднялось. Однако
начались жуткие тормоза при чтении/записи - загрузка процессора под
100%, все жутко замирает. SATA-винт видится как hda!
При загрузке с LiveCD таких тормозов нет, все прекрасно.
Начал разбираться, сравнил на LiveCD и в системе вывод
lsmod | grep permanent
ide_generic 5248 0 [permanent]
piix 11400 0 [permanent]
ide_pci_generic 8196 0 [permanent]
На LiveCD только
ide_pci_generic 8196 0 [permanent]
Я так понимаю что дело именно в этом. Решил перегенерить initrd с
выгрузкой из него этих модулей. Делаю:
uname -r
2.6.25-std-def-alt8.M41.4
В итоге получаю:
mkinitrd --omit-ide-modules ide_generic -f
/boot/initrd-2.6.25-std-def-alt8.M41.4-2.img 2.6.25-std-def-alt8.M41.4
mkinitrd: Invalid kernel version
"/boot/initrd-2.6.25-std-def-alt8.M41.4-2.img"
Без --omit-ide-modules ide_generic работает
Кто что может подсказать?
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [Hardware] Лишние модули в initrd - последствия переезда системы на другую машину
2009-03-04 8:47 [Hardware] Лишние модули в initrd - последствия переезда системы на другую машину Motsyo Gennadi aka Drool
@ 2009-03-04 10:03 ` Motsyo Gennadi aka Drool
0 siblings, 0 replies; 2+ messages in thread
From: Motsyo Gennadi aka Drool @ 2009-03-04 10:03 UTC (permalink / raw)
To: hardware
Motsyo Gennadi aka Drool пишет:
> Приветствую всех.
>
> Перенес систему с одной машины на другую. Все поднялось. Однако
> начались жуткие тормоза при чтении/записи - загрузка процессора под
> 100%, все жутко замирает. SATA-винт видится как hda!
> При загрузке с LiveCD таких тормозов нет, все прекрасно.
> Начал разбираться, сравнил на LiveCD и в системе вывод
>
> lsmod | grep permanent
> ide_generic 5248 0 [permanent]
> piix 11400 0 [permanent]
> ide_pci_generic 8196 0 [permanent]
>
> На LiveCD только
> ide_pci_generic 8196 0 [permanent]
>
> Я так понимаю что дело именно в этом. Решил перегенерить initrd с
> выгрузкой из него этих модулей. Делаю:
> uname -r
> 2.6.25-std-def-alt8.M41.4
>
> В итоге получаю:
> mkinitrd --omit-ide-modules ide_generic -f
> /boot/initrd-2.6.25-std-def-alt8.M41.4-2.img 2.6.25-std-def-alt8.M41.4
> mkinitrd: Invalid kernel version
> "/boot/initrd-2.6.25-std-def-alt8.M41.4-2.img"
>
> Без --omit-ide-modules ide_generic работает
Докладаю. По подсказке silicium@ оказалось что у --omit-ide-modules нет
параметров. Когда из строки выбросил указание конкретного модуля - все
сгенерилось. Тормоза пропали.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2009-03-04 10:03 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-03-04 8:47 [Hardware] Лишние модули в initrd - последствия переезда системы на другую машину Motsyo Gennadi aka Drool
2009-03-04 10:03 ` Motsyo Gennadi aka Drool
ALT Linux hardware support
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \
hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org
public-inbox-index hardware
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.hardware
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git