ALT Linux hardware support
 help / color / mirror / Atom feed
* Re: [Hardware] std-def-2.6.24-alt7
  @ 2008-04-27 17:15 ` Konstantin A. Lepikhov
  2008-04-27 17:33   ` [Hardware] [sisyphus] std-def-2.6.24-alt7 Andriy Khavryuchenko
  0 siblings, 1 reply; 4+ messages in thread
From: Konstantin A. Lepikhov @ 2008-04-27 17:15 UTC (permalink / raw)
  To: ALT Linux Sisyphus discussions; +Cc: ALT Linux Hardware Mailing List

Hi Andriy!

Sunday 27, at 07:19:05 PM you wrote:

> Ноут ibm thinkpad t42 с wifi картой airo.  При загрузке интерфейс wlan не 
> поднимается, модуль не удаляется, т.к. "in use".
> 
> Под std-smp-2.6.18-alt12 всё работает.
> 
> # lspci -v
> [...]
> 02:02.0 Network controller: AIRONET Wireless Communications Cisco Aironet 
> Wireless 802.11b
>         Subsystem: AIRONET Wireless Communications Device 5000
>         Flags: bus master, fast devsel, latency 64, IRQ 11
>         I/O ports at 8000 [size=256]
>         Memory at c0214000 (32-bit, non-prefetchable) [size=16K]
>         Memory at c0400000 (32-bit, non-prefetchable) [size=4M]
>         [virtual] Expansion ROM at ec000000 [disabled] [size=2M]
>         Capabilities: [40] Power Management version 2
>         Capabilities: [48] Vital Product Data <?>
>         Kernel driver in use: airo
>         Kernel modules: airo
> 
> Насколько я понимаю, все остальные 2.6.24 танцуют от него же, так что на 
> них те же симптомы.
> 
> Куда копать?  Это мои руки или вешать тикет?
вывод lspci -nnvv от рута в студию.

PS Тема для hardware@

-- 
WBR et al.


^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [Hardware] [sisyphus] std-def-2.6.24-alt7
  2008-04-27 17:15 ` [Hardware] std-def-2.6.24-alt7 Konstantin A. Lepikhov
@ 2008-04-27 17:33   ` Andriy Khavryuchenko
  2008-04-27 18:18     ` Andriy Khavryuchenko
  2008-04-29 18:21     ` Andriy Khavryuchenko
  0 siblings, 2 replies; 4+ messages in thread
From: Andriy Khavryuchenko @ 2008-04-27 17:33 UTC (permalink / raw)
  To: hardware

[-- Attachment #1: Type: text/plain, Size: 2840 bytes --]

Konstantin A. Lepikhov написав(ла):
> Hi Andriy!
> 
> Sunday 27, at 07:19:05 PM you wrote:
> 
>> Ноут ibm thinkpad t42 с wifi картой airo.  При загрузке интерфейс wlan не 
>> поднимается, модуль не удаляется, т.к. "in use".
>>
>> Под std-smp-2.6.18-alt12 всё работает.
>>
>> # lspci -v
>> [...]
>> 02:02.0 Network controller: AIRONET Wireless Communications Cisco Aironet 
>> Wireless 802.11b
>>         Subsystem: AIRONET Wireless Communications Device 5000
>>         Flags: bus master, fast devsel, latency 64, IRQ 11
>>         I/O ports at 8000 [size=256]
>>         Memory at c0214000 (32-bit, non-prefetchable) [size=16K]
>>         Memory at c0400000 (32-bit, non-prefetchable) [size=4M]
>>         [virtual] Expansion ROM at ec000000 [disabled] [size=2M]
>>         Capabilities: [40] Power Management version 2
>>         Capabilities: [48] Vital Product Data <?>
>>         Kernel driver in use: airo
>>         Kernel modules: airo
>>
>> Насколько я понимаю, все остальные 2.6.24 танцуют от него же, так что на 
>> них те же симптомы.
>>
>> Куда копать?  Это мои руки или вешать тикет?
> вывод lspci -nnvv от рута в студию.

Вывод под 2.6.18-std-smp-alt12, на работающем ядре:

02:02.0 Network controller [0280]: AIRONET Wireless Communications Cisco 
Aironet Wireless 802.11b [14b9:a504]
         Subsystem: AIRONET Wireless Communications Device [14b9:5000]
         Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- 
ParErr- Stepping- SERR+ FastB2B- DisINTx-
         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
         Latency: 64 (1000ns min, 1000ns max), Cache Line Size: 32 bytes
         Interrupt: pin A routed to IRQ 11
         Region 0: I/O ports at 8000 [size=256]
         Region 1: Memory at c0214000 (32-bit, non-prefetchable) [size=16K]
         Region 2: Memory at c0400000 (32-bit, non-prefetchable) [size=4M]
         [virtual] Expansion ROM at ec000000 [disabled] [size=2M]
         Capabilities: [40] Power Management version 2
                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                 Status: D0 PME-Enable- DSel=0 DScale=2 PME-
         Capabilities: [48] Vital Product Data <?>
         Kernel driver in use: airo
         Kernel modules: airo


Полный вывод - в аттаче.

> PS Тема для hardware@

Ок.


-- 
mainstream кстати отпадает - они теперь используют /proc/acpi/video, а я
ещё не разу не видел что бы это работало (через ACPI)
		-- rider in #8192

[-- Attachment #2: lspci.txt --]
[-- Type: text/plain, Size: 12705 bytes --]

00:00.0 Host bridge [0600]: Intel Corporation 82855PM Processor to I/O Controller [8086:3340] (rev 03)
	Subsystem: IBM ThinkPad T41 [1014:0529]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
	Capabilities: [e4] Vendor Specific Information <?>
	Capabilities: [a0] AGP version 2.0
		Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
		Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
	Kernel driver in use: agpgart-intel
	Kernel modules: intel-agp

00:01.0 PCI bridge [0604]: Intel Corporation 82855PM Processor to AGP Controller [8086:3341] (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 96
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: c0100000-c01fffff
	Prefetchable memory behind bridge: e0000000-e7ffffff
	Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Kernel modules: shpchp

00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 01) (prog-if 00 [UHCI])
	Subsystem: IBM ThinkPad [1014:052d]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 11
	Region 4: I/O ports at 1800 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 01) (prog-if 00 [UHCI])
	Subsystem: IBM ThinkPad [1014:052d]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 11
	Region 4: I/O ports at 1820 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 01) (prog-if 00 [UHCI])
	Subsystem: IBM ThinkPad [1014:052d]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 11
	Region 4: I/O ports at 1840 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 01) (prog-if 20 [EHCI])
	Subsystem: IBM ThinkPad [1014:052e]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin D routed to IRQ 11
	Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] Debug port: BAR=1 offset=0080
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 81) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
	Latency: 0
	Bus: primary=00, secondary=02, subordinate=08, sec-latency=64
	I/O behind bridge: 00004000-00008fff
	Memory behind bridge: c0200000-cfffffff
	Prefetchable memory behind bridge: e8000000-efffffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Kernel modules: shpchp

00:1f.0 ISA bridge [0601]: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge [8086:24cc] (rev 01)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Kernel modules: intel-rng, ipmi_si, i8xx_tco

00:1f.1 IDE interface [0101]: Intel Corporation 82801DBM (ICH4-M) IDE Controller [8086:24ca] (rev 01) (prog-if 8a [Master SecP PriP])
	Subsystem: IBM ThinkPad [1014:052d]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at <unassigned>
	Region 1: I/O ports at <unassigned>
	Region 2: I/O ports at <unassigned>
	Region 3: I/O ports at <unassigned>
	Region 4: I/O ports at 1860 [size=16]
	Region 5: Memory at 50000000 (32-bit, non-prefetchable) [size=1K]
	Kernel driver in use: PIIX_IDE
	Kernel modules: piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller [8086:24c3] (rev 01)
	Subsystem: IBM ThinkPad [1014:052d]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin B routed to IRQ 11
	Region 4: I/O ports at 1880 [size=32]
	Kernel driver in use: i801_smbus
	Kernel modules: i2c-i801

00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 01)
	Subsystem: IBM ThinkPad T41 [1014:0537]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 11
	Region 0: I/O ports at 1c00 [size=256]
	Region 1: I/O ports at 18c0 [size=64]
	Region 2: Memory at c0000c00 (32-bit, non-prefetchable) [size=512]
	Region 3: Memory at c0000800 (32-bit, non-prefetchable) [size=256]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: Intel ICH
	Kernel modules: snd-intel8x0

00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller [8086:24c6] (rev 01) (prog-if 00 [Generic])
	Subsystem: IBM ThinkPad R50e [1014:0559]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin B routed to IRQ 11
	Region 0: I/O ports at 2400 [disabled] [size=256]
	Region 1: I/O ports at 2000 [disabled] [size=128]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel modules: snd-intel8x0m

01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500] [1002:4c57] (prog-if 00 [VGA controller])
	Subsystem: IBM Device [1014:0530]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B+ DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 66 (2000ns min), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
	Region 1: I/O ports at 3000 [size=256]
	Region 2: Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
	[virtual] Expansion ROM at c0120000 [disabled] [size=128K]
	Capabilities: [58] AGP version 2.0
		Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
		Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel modules: radeonfb

02:00.0 CardBus bridge [0607]: Texas Instruments PCI4520 PC card Cardbus Controller [104c:ac46] (rev 01)
	Subsystem: IBM ThinkPad [1014:0552]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 168, Cache Line Size: 128 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at b0000000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
	Memory window 0: e8000000-e9fff000 (prefetchable)
	Memory window 1: c2000000-c3fff000
	I/O window 0: 00004000-000040ff
	I/O window 1: 00004400-000044ff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001
	Kernel driver in use: yenta_cardbus
	Kernel modules: yenta_socket

02:00.1 CardBus bridge [0607]: Texas Instruments PCI4520 PC card Cardbus Controller [104c:ac46] (rev 01)
	Subsystem: IBM ThinkPad [1014:0552]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 168, Cache Line Size: 128 bytes
	Interrupt: pin B routed to IRQ 11
	Region 0: Memory at b1000000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=02, secondary=07, subordinate=07, sec-latency=176
	Memory window 0: ea000000-ebfff000 (prefetchable)
	Memory window 1: c4000000-c5fff000
	I/O window 0: 00004800-000048ff
	I/O window 1: 00004c00-00004cff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001
	Kernel driver in use: yenta_cardbus
	Kernel modules: yenta_socket

02:01.0 Ethernet controller [0200]: Intel Corporation 82540EP Gigabit Ethernet Controller (Mobile) [8086:101e] (rev 03)
	Subsystem: IBM PRO/1000 MT Mobile Connection [1014:0549]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (63750ns min), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at c0220000 (32-bit, non-prefetchable) [size=128K]
	Region 1: Memory at c0200000 (32-bit, non-prefetchable) [size=64K]
	Region 2: I/O ports at 8400 [size=64]
	[virtual] Expansion ROM at ec200000 [disabled] [size=64K]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
	Kernel driver in use: e1000
	Kernel modules: e1000

02:02.0 Network controller [0280]: AIRONET Wireless Communications Cisco Aironet Wireless 802.11b [14b9:a504]
	Subsystem: AIRONET Wireless Communications Device [14b9:5000]
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (1000ns min, 1000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at 8000 [size=256]
	Region 1: Memory at c0214000 (32-bit, non-prefetchable) [size=16K]
	Region 2: Memory at c0400000 (32-bit, non-prefetchable) [size=4M]
	[virtual] Expansion ROM at ec000000 [disabled] [size=2M]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=2 PME-
	Capabilities: [48] Vital Product Data <?>
	Kernel driver in use: airo
	Kernel modules: airo


^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [Hardware] [sisyphus] std-def-2.6.24-alt7
  2008-04-27 17:33   ` [Hardware] [sisyphus] std-def-2.6.24-alt7 Andriy Khavryuchenko
@ 2008-04-27 18:18     ` Andriy Khavryuchenko
  2008-04-29 18:21     ` Andriy Khavryuchenko
  1 sibling, 0 replies; 4+ messages in thread
From: Andriy Khavryuchenko @ 2008-04-27 18:18 UTC (permalink / raw)
  To: hardware

[-- Attachment #1: Type: text/plain, Size: 2670 bytes --]

Andriy Khavryuchenko написав(ла):
> Konstantin A. Lepikhov написав(ла):
>> Sunday 27, at 07:19:05 PM you wrote:
>>> Куда копать?  Это мои руки или вешать тикет?
>> вывод lspci -nnvv от рута в студию.
> 
> Вывод под 2.6.18-std-smp-alt12, на работающем ядре:
 > 02:02.0 Network controller [0280]: AIRONET Wireless Communications Cisco
 > Aironet Wireless 802.11b [14b9:a504]
 >         Subsystem: AIRONET Wireless Communications Device [14b9:5000]
 >         Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop-
 > ParErr- Stepping- SERR+ FastB2B- DisINTx-
 >         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
 > <TAbort- <MAbort- >SERR- <PERR- INTx-
 >         Latency: 64 (1000ns min, 1000ns max), Cache Line Size: 32 bytes
 >         Interrupt: pin A routed to IRQ 11
 >         Region 0: I/O ports at 8000 [size=256]
 >         Region 1: Memory at c0214000 (32-bit, non-prefetchable) 
[size=16K]
 >         Region 2: Memory at c0400000 (32-bit, non-prefetchable) [size=4M]
 >         [virtual] Expansion ROM at ec000000 [disabled] [size=2M]
 >         Capabilities: [40] Power Management version 2
 >                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
 > PME(D0-,D1-,D2-,D3hot-,D3cold-)
 >                 Status: D0 PME-Enable- DSel=0 DScale=2 PME-
 >         Capabilities: [48] Vital Product Data <?>
 >         Kernel driver in use: airo
 >         Kernel modules: airo

Вывод под 2.6.24-std-def-alt7:

02:02.0 Network controller [0280]: AIRONET Wireless Communications Cisco 
Aironet Wireless 802.11b [14b9:a504]
	Subsystem: AIRONET Wireless Communications Device [14b9:5000]
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
	Latency: 64 (1000ns min, 1000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at 8000 [size=256]
	Region 1: Memory at c0214000 (32-bit, non-prefetchable) [size=16K]
	Region 2: Memory at c0400000 (32-bit, non-prefetchable) [size=4M]
	[virtual] Expansion ROM at c0800000 [disabled] [size=2M]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=2 PME-
	Capabilities: [48] Vital Product Data <?>
	Kernel driver in use: airo
	Kernel modules: airo

Полный вывод - в аттаче.

-- 
power надо вообще выкинуть - он obsoleted по жизни
		-- rider in #7979

[-- Attachment #2: lspci.txt --]
[-- Type: text/plain, Size: 12512 bytes --]

00:00.0 Host bridge [0600]: Intel Corporation 82855PM Processor to I/O Controller [8086:3340] (rev 03)
	Subsystem: IBM ThinkPad T41 [1014:0529]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
	Capabilities: [e4] Vendor Specific Information <?>
	Capabilities: [a0] AGP version 2.0
		Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
		Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
	Kernel driver in use: agpgart-intel
	Kernel modules: intel-agp

00:01.0 PCI bridge [0604]: Intel Corporation 82855PM Processor to AGP Controller [8086:3341] (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 96
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: c0100000-c01fffff
	Prefetchable memory behind bridge: e0000000-e7ffffff
	Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Kernel modules: shpchp

00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 01) (prog-if 00 [UHCI])
	Subsystem: IBM ThinkPad [1014:052d]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 11
	Region 4: I/O ports at 1800 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 01) (prog-if 00 [UHCI])
	Subsystem: IBM ThinkPad [1014:052d]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 11
	Region 4: I/O ports at 1820 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 01) (prog-if 00 [UHCI])
	Subsystem: IBM ThinkPad [1014:052d]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 11
	Region 4: I/O ports at 1840 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 01) (prog-if 20 [EHCI])
	Subsystem: IBM ThinkPad [1014:052e]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin D routed to IRQ 11
	Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] Debug port: BAR=1 offset=0080
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 81) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
	Latency: 0
	Bus: primary=00, secondary=02, subordinate=08, sec-latency=64
	I/O behind bridge: 00004000-00008fff
	Memory behind bridge: c0200000-cfffffff
	Prefetchable memory behind bridge: e8000000-efffffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Kernel modules: shpchp

00:1f.0 ISA bridge [0601]: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge [8086:24cc] (rev 01)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Kernel modules: intel-rng, iTCO_wdt

00:1f.1 IDE interface [0101]: Intel Corporation 82801DBM (ICH4-M) IDE Controller [8086:24ca] (rev 01) (prog-if 8a [Master SecP PriP])
	Subsystem: IBM ThinkPad [1014:052d]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4 [size=1]
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374 [size=1]
	Region 4: I/O ports at 1860 [size=16]
	Region 5: Memory at 50000000 (32-bit, non-prefetchable) [size=1K]
	Kernel driver in use: PIIX_IDE
	Kernel modules: ata_piix, piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller [8086:24c3] (rev 01)
	Subsystem: IBM ThinkPad [1014:052d]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin B routed to IRQ 11
	Region 4: I/O ports at 1880 [size=32]
	Kernel modules: i2c-i801

00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 01)
	Subsystem: IBM ThinkPad T41 [1014:0537]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 11
	Region 0: I/O ports at 1c00 [size=256]
	Region 1: I/O ports at 18c0 [size=64]
	Region 2: Memory at c0000c00 (32-bit, non-prefetchable) [size=512]
	Region 3: Memory at c0000800 (32-bit, non-prefetchable) [size=256]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller [8086:24c6] (rev 01) (prog-if 00 [Generic])
	Subsystem: IBM ThinkPad R50e [1014:0559]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin B routed to IRQ 11
	Region 0: I/O ports at 2400 [size=256]
	Region 1: I/O ports at 2000 [size=128]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500] [1002:4c57] (prog-if 00 [VGA controller])
	Subsystem: IBM Device [1014:0530]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B+ DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 66 (2000ns min), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
	Region 1: I/O ports at 3000 [size=256]
	Region 2: Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
	[virtual] Expansion ROM at c0120000 [disabled] [size=128K]
	Capabilities: [58] AGP version 2.0
		Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
		Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel modules: radeonfb

02:00.0 CardBus bridge [0607]: Texas Instruments PCI4520 PC card Cardbus Controller [104c:ac46] (rev 01)
	Subsystem: IBM ThinkPad [1014:0552]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at b0000000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
	Memory window 0: e8000000-ebfff000 (prefetchable)
	Memory window 1: c4000000-c7fff000 (prefetchable)
	I/O window 0: 00004000-000040ff
	I/O window 1: 00004400-000044ff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite-
	16-bit legacy interface ports at 0001
	Kernel modules: yenta_socket

02:00.1 CardBus bridge [0607]: Texas Instruments PCI4520 PC card Cardbus Controller [104c:ac46] (rev 01)
	Subsystem: IBM ThinkPad [1014:0552]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 32 bytes
	Interrupt: pin B routed to IRQ 11
	Region 0: Memory at b1000000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=02, secondary=07, subordinate=07, sec-latency=176
	Memory window 0: ec000000-effff000 (prefetchable)
	Memory window 1: c8000000-cbfff000 (prefetchable)
	I/O window 0: 00004800-000048ff
	I/O window 1: 00004c00-00004cff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite-
	16-bit legacy interface ports at 0001
	Kernel modules: yenta_socket

02:01.0 Ethernet controller [0200]: Intel Corporation 82540EP Gigabit Ethernet Controller (Mobile) [8086:101e] (rev 03)
	Subsystem: IBM PRO/1000 MT Mobile Connection [1014:0549]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (63750ns min), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at c0220000 (32-bit, non-prefetchable) [size=128K]
	Region 1: Memory at c0200000 (32-bit, non-prefetchable) [size=64K]
	Region 2: I/O ports at 8400 [size=64]
	[virtual] Expansion ROM at c0240000 [disabled] [size=64K]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
	Kernel driver in use: e1000
	Kernel modules: e1000

02:02.0 Network controller [0280]: AIRONET Wireless Communications Cisco Aironet Wireless 802.11b [14b9:a504]
	Subsystem: AIRONET Wireless Communications Device [14b9:5000]
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (1000ns min, 1000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at 8000 [size=256]
	Region 1: Memory at c0214000 (32-bit, non-prefetchable) [size=16K]
	Region 2: Memory at c0400000 (32-bit, non-prefetchable) [size=4M]
	[virtual] Expansion ROM at c0800000 [disabled] [size=2M]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=2 PME-
	Capabilities: [48] Vital Product Data <?>
	Kernel driver in use: airo
	Kernel modules: airo


^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [Hardware] [sisyphus] std-def-2.6.24-alt7
  2008-04-27 17:33   ` [Hardware] [sisyphus] std-def-2.6.24-alt7 Andriy Khavryuchenko
  2008-04-27 18:18     ` Andriy Khavryuchenko
@ 2008-04-29 18:21     ` Andriy Khavryuchenko
  1 sibling, 0 replies; 4+ messages in thread
From: Andriy Khavryuchenko @ 2008-04-29 18:21 UTC (permalink / raw)
  To: hardware

Andriy Khavryuchenko написав(ла):
>> Sunday 27, at 07:19:05 PM you wrote:
>>
>>> Ноут ibm thinkpad t42 с wifi картой airo.  При загрузке интерфейс 
>>> wlan не поднимается, модуль не удаляется, т.к. "in use".

Какие-нибудь идеи?

-- 
Стас, надо как-то раскрасить диалоги.
		-- rider in #7335


^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2008-04-29 18:21 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-04-27 17:15 ` [Hardware] std-def-2.6.24-alt7 Konstantin A. Lepikhov
2008-04-27 17:33   ` [Hardware] [sisyphus] std-def-2.6.24-alt7 Andriy Khavryuchenko
2008-04-27 18:18     ` Andriy Khavryuchenko
2008-04-29 18:21     ` Andriy Khavryuchenko

ALT Linux hardware support

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \
		hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org
	public-inbox-index hardware

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://lore.altlinux.org/org.altlinux.lists.hardware


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git