* [Hardware] Zyxel Omni 56K USB Plus
@ 2007-02-14 14:57 LVU
2007-02-16 8:24 ` LVU
0 siblings, 1 reply; 2+ messages in thread
From: LVU @ 2007-02-14 14:57 UTC (permalink / raw)
To: hardware
Здравствуйте!
Имеется модем Zyxel Omni 56K USB Plus. Драйвера поднимаются,
в minicom'е AT команды работают, модем отвечает, все
нормально. Но pppd в упор отказывается с ним общаться - chat
отдает AT, OK в ответ не приходит. Первоначально делал через
ifup ppp1, потом вызывал напрямую pppd - одинаково.
Перепробовал вроде все комбинации опций modem/local,
crtscts/nocrtscts/xonxoff и скорости 115200/38400. В чем
может быть дело?
Девайс висит на /dev/input/ttyACM0, система - ALM 2.4,
ситуация одинакова как с штатным 2.4.26 ядром, так и с
ядром 2.6.16-alt10 из среза Сизифа.
With best regards, LVU.
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [Hardware] Zyxel Omni 56K USB Plus
2007-02-14 14:57 [Hardware] Zyxel Omni 56K USB Plus LVU
@ 2007-02-16 8:24 ` LVU
0 siblings, 0 replies; 2+ messages in thread
From: LVU @ 2007-02-16 8:24 UTC (permalink / raw)
To: hardware
Здравствуйте!
LVU wrote:
> Имеется модем Zyxel Omni 56K USB Plus. Драйвера поднимаются,
> в minicom'е AT команды работают, модем отвечает, все
> нормально. Но pppd в упор отказывается с ним общаться - chat
> отдает AT, OK в ответ не приходит.
> ...
Разобрался, проблема была в chat-скрипте. Во взятой
откуда-то козе в строчке, которая отправляет первое AT
стояло \rAT. Почему-то все остальные модемы это нормально
воспринимали, а этот - нет. Убрал \r - все заработало.
With best regards, LVU.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2007-02-16 8:24 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-02-14 14:57 [Hardware] Zyxel Omni 56K USB Plus LVU
2007-02-16 8:24 ` LVU
ALT Linux hardware support
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \
hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org
public-inbox-index hardware
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.hardware
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git