From: Anton Gorlov <stalker@altlinux.ru>
To: hardware@lists.altlinux.org
Subject: Re: [Hardware] NF590
Date: Fri, 09 Feb 2007 01:45:57 +0300
Message-ID: <45CBA825.6020904@altlinux.ru> (raw)
In-Reply-To: <20070206202221.GH6879@procyon.home>
[-- Attachment #1: Type: text/plain, Size: 1858 bytes --]
В общем кое-как поставил на ночь глядя систему на новый компьютер с
ядром 2.6.18-std.smp - загрузка с acpi_use_timer_override по прежнему не
помогла,но на экран перед смертью ядро успело написать на 4 строки больше:
Total of 2 processors activated (8040.74 BOgoMIPS)
Timer vector=0x31 apic1=0,pin1=0 apic2=-1 pin2=-1
MP-BIOS Bug: 8254 timer not connectetd to IO-APIC
trying to set up timer (IRQ0) through the 8259 .... failded
trying to set up timer as VirtualWire ... failed
trying to set up timerv as ExtInt IRQ ... failed
и потом кернел-паник.
Всё что удалсоь вытянуть с noapic -в аттаче.
Ещё в глаза бросилось что оно на совсем здоровый винт (снял час назад со
своей рабчоей машинки)
hde: MAXTOR 6L040J2, ATA DISK drive
...
SGI XFS Quota Management subsystem
XFS mounting filesystem hde6
Ending clean XFS mount for filesystem: hde6
VFS: Mounted root (xfs filesystem) readonly.
Trying to move old root to /initrd ... /initrd does not exist. Ignored.
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 192k freed
Executing init=/sbin/init
Real Time Clock Driver v1.12ac
Adding 1044184k swap on /dev/hde5. Priority:-1 extents:1 across:1044184k
hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hde: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hde: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hde: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hde: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hdf: DMA disabled
ide2: reset: success
Хотя винт живой :-(
--
np: silence
[-- Attachment #2: lspci --]
[-- Type: text/plain, Size: 12998 bytes --]
00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
Subsystem: EPoX Computer Co., Ltd. Unknown device 1026
Flags: bus master, 66MHz, fast devsel, latency 0
Capabilities: [44] HyperTransport: Slave or Primary Interface
Capabilities: [e0] HyperTransport: MSI Mapping
00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
Subsystem: EPoX Computer Co., Ltd. Unknown device 1026
Flags: 66MHz, fast devsel
00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
Subsystem: EPoX Computer Co., Ltd. Unknown device 1026
Flags: 66MHz, fast devsel
00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
Subsystem: EPoX Computer Co., Ltd. Unknown device 1026
Flags: 66MHz, fast devsel
00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2)
Subsystem: EPoX Computer Co., Ltd. Unknown device 1026
Flags: bus master, 66MHz, fast devsel, latency 0
00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
Flags: bus master, 66MHz, fast devsel, latency 0
Capabilities: [44] #00 [0000]
00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2)
Subsystem: EPoX Computer Co., Ltd. Unknown device 1026
Flags: 66MHz, fast devsel
00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2)
Subsystem: EPoX Computer Co., Ltd. Unknown device 1026
Flags: 66MHz, fast devsel
00:04.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fa000000-fcffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Capabilities: [40] Subsystem: nVidia Corporation Unknown device 0000
Capabilities: [48] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Capabilities: [60] HyperTransport: MSI Mapping
Capabilities: [80] Express Root Port (Slot+) IRQ 0
Capabilities: [100] Virtual Channel
00:08.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a1)
Subsystem: EPoX Computer Co., Ltd. Unknown device 1026
Flags: bus master, 66MHz, fast devsel, latency 0
Capabilities: [44] HyperTransport: Slave or Primary Interface
Capabilities: [e0] #00 [fee0]
00:09.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a2)
Subsystem: EPoX Computer Co., Ltd. Unknown device 1026
Flags: bus master, 66MHz, fast devsel, latency 0
00:09.1 SMBus: nVidia Corporation MCP55 SMBus (rev a2)
Subsystem: EPoX Computer Co., Ltd. Unknown device 1026
Flags: 66MHz, fast devsel, IRQ 5
I/O ports at fc00 [size=64]
I/O ports at f800 [size=64]
Capabilities: [44] Power Management version 2
00:09.2 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2)
Subsystem: EPoX Computer Co., Ltd. Unknown device 1026
Flags: 66MHz, fast devsel
00:0a.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1) (prog-if 10 [OHCI])
Subsystem: EPoX Computer Co., Ltd. Unknown device 1026
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 10
Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
00:0a.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2) (prog-if 20 [EHCI])
Subsystem: EPoX Computer Co., Ltd. Unknown device 1026
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 11
Memory at fe02e000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port
Capabilities: [80] Power Management version 2
00:0c.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) (prog-if 8a [Master SecP PriP])
Subsystem: EPoX Computer Co., Ltd. Unknown device 1026
Flags: bus master, 66MHz, fast devsel, latency 0
I/O ports at f400 [size=16]
Capabilities: [44] Power Management version 2
00:0d.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: EPoX Computer Co., Ltd. Unknown device 1026
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 10
I/O ports at 09f0 [size=8]
I/O ports at 0bf0 [size=4]
I/O ports at 0970 [size=8]
I/O ports at 0b70 [size=4]
I/O ports at e000 [size=16]
Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
Capabilities: [cc] HyperTransport: MSI Mapping
00:0d.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: EPoX Computer Co., Ltd. Unknown device 1026
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 11
I/O ports at 09e0 [size=8]
I/O ports at 0be0 [size=4]
I/O ports at 0960 [size=8]
I/O ports at 0b60 [size=4]
I/O ports at cc00 [size=16]
Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
Capabilities: [cc] HyperTransport: MSI Mapping
00:0d.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: EPoX Computer Co., Ltd. Unknown device 1026
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 5
I/O ports at c800 [size=8]
I/O ports at c400 [size=4]
I/O ports at c000 [size=8]
I/O ports at bc00 [size=4]
I/O ports at b800 [size=16]
Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
Capabilities: [cc] HyperTransport: MSI Mapping
00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2) (prog-if 01 [Subtractive decode])
Flags: bus master, 66MHz, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 00008000-00009fff
Memory behind bridge: fde00000-fdefffff
Prefetchable memory behind bridge: fdf00000-fdffffff
Capabilities: [b8] Subsystem: Gammagraphx, Inc. Unknown device 0000
Capabilities: [8c] HyperTransport: MSI Mapping
00:0e.1 Audio device: nVidia Corporation MCP55 High Definition Audio (rev a2)
Subsystem: EPoX Computer Co., Ltd. Unknown device 1026
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 5
Memory at fe020000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable-
Capabilities: [6c] HyperTransport: MSI Mapping
00:10.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a2)
Subsystem: EPoX Computer Co., Ltd. Unknown device 1026
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 10
Memory at fe02a000 (32-bit, non-prefetchable) [size=4K]
I/O ports at b400 [size=8]
Memory at fe029000 (32-bit, non-prefetchable) [size=256]
Memory at fe028000 (32-bit, non-prefetchable) [size=16]
Capabilities: [44] Power Management version 2
Capabilities: [70] MSI-X: Enable+ Mask- TabSize=8
Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/3 Enable-
Capabilities: [6c] HyperTransport: MSI Mapping
00:11.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a2)
Subsystem: EPoX Computer Co., Ltd. Unknown device 1026
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 11
Memory at fe027000 (32-bit, non-prefetchable) [size=4K]
I/O ports at b000 [size=8]
Memory at fe026000 (32-bit, non-prefetchable) [size=256]
Memory at fe025000 (32-bit, non-prefetchable) [size=16]
Capabilities: [44] Power Management version 2
Capabilities: [70] MSI-X: Enable- Mask- TabSize=8
Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/3 Enable-
Capabilities: [6c] HyperTransport: MSI Mapping
00:13.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00006000-00007fff
Memory behind bridge: fdd00000-fddfffff
Prefetchable memory behind bridge: 00000000fdc00000-00000000fdcfffff
Capabilities: [40] Subsystem: nVidia Corporation Unknown device 0000
Capabilities: [48] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Capabilities: [60] HyperTransport: MSI Mapping
Capabilities: [80] Express Root Port (Slot+) IRQ 0
Capabilities: [100] Virtual Channel
00:15.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: fdb00000-fdbfffff
Prefetchable memory behind bridge: 00000000fda00000-00000000fdafffff
Capabilities: [40] Subsystem: nVidia Corporation Unknown device 0000
Capabilities: [48] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Capabilities: [60] HyperTransport: MSI Mapping
Capabilities: [80] Express Root Port (Slot+) IRQ 0
Capabilities: [100] Virtual Channel
00:16.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: fd900000-fd9fffff
Prefetchable memory behind bridge: 00000000fd800000-00000000fd8fffff
Capabilities: [40] Subsystem: nVidia Corporation Unknown device 0000
Capabilities: [48] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Capabilities: [60] HyperTransport: MSI Mapping
Capabilities: [80] Express Root Port (Slot+) IRQ 0
Capabilities: [100] Virtual Channel
00:17.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: fd700000-fd7fffff
Prefetchable memory behind bridge: 00000000fd600000-00000000fd6fffff
Capabilities: [40] Subsystem: nVidia Corporation Unknown device 0000
Capabilities: [48] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Capabilities: [60] HyperTransport: MSI Mapping
Capabilities: [80] Express Root Port (Slot+) IRQ 0
Capabilities: [100] Virtual Channel
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Flags: fast devsel
Capabilities: [80] HyperTransport: Host or Secondary Interface
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Flags: fast devsel
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Flags: fast devsel
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Flags: fast devsel
Capabilities: [f0] #0f [0010]
01:00.0 VGA compatible controller: nVidia Corporation G70 [GeForce 7600 GS] (rev a1) (prog-if 00 [VGA])
Subsystem: LeadTek Research Inc. Unknown device 2a55
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Memory at fb000000 (64-bit, non-prefetchable) [size=16M]
I/O ports at ac00 [size=128]
[virtual] Expansion ROM at fc000000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Capabilities: [78] Express Endpoint IRQ 0
Capabilities: [100] Virtual Channel
Capabilities: [128] Power Budgeting
02:05.0 Serial controller: NetMos Technology PCI 9835 Multi-I/O Controller (rev 01) (prog-if 02 [16550])
Subsystem: LSI Logic / Symbios Logic 2S (16C550 UART)
Flags: medium devsel, IRQ 5
I/O ports at 9c00 [size=8]
I/O ports at 9800 [size=8]
I/O ports at 9400 [size=8]
I/O ports at 9000 [size=8]
I/O ports at 8c00 [size=8]
I/O ports at 8800 [size=16]
03:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: EPoX Computer Co., Ltd. Unknown device 9034
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at fddfe000 (32-bit, non-prefetchable) [size=8K]
[virtual] Expansion ROM at fdc00000 [disabled] [size=64K]
Capabilities: [68] Power Management version 2
Capabilities: [50] Express Legacy Endpoint IRQ 1
03:00.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: EPoX Computer Co., Ltd. Unknown device 9034
Flags: bus master, fast devsel, latency 0, IRQ 11
I/O ports at 7c00 [size=8]
I/O ports at 7800 [size=4]
I/O ports at 7400 [size=8]
I/O ports at 7000 [size=4]
I/O ports at 6c00 [size=16]
Capabilities: [68] Power Management version 2
[-- Attachment #3: dmesg.gz --]
[-- Type: application/x-gzip, Size: 6662 bytes --]
[-- Attachment #4: hdparm --]
[-- Type: text/plain, Size: 245 bytes --]
/dev/hde:
multcount = 16 (on)
IO_support = 1 (32-bit)
unmaskirq = 1 (on)
using_dma = 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
geometry = 65535/16/63, sectors = 78177792, start = 0
[-- Attachment #5: interrupts --]
[-- Type: text/plain, Size: 1059 bytes --]
CPU0 CPU1
0: 169282 2179 XT-PIC timer
1: 2915 19 XT-PIC i8042
2: 0 0 XT-PIC cascade
5: 0 0 XT-PIC libata
6: 3 0 XT-PIC floppy
7: 2398 175525 XT-PIC parport0
8: 1 0 XT-PIC rtc
9: 0 0 XT-PIC acpi
10: 41 29 XT-PIC libata, ohci_hcd:usb2
11: 1055 11 XT-PIC libata, libata, ehci_hcd:usb1
12: 91 37 XT-PIC i8042
14: 2209 129 XT-PIC ide2
105: 5 0 PCI-MSI-X eth0
113: 8 0 PCI-MSI-X eth0
121: 58264 0 PCI-MSI-X eth0
129: 0 0 PCI-MSI-X eth1
137: 0 0 PCI-MSI-X eth1
145: 13099 0 PCI-MSI-X eth1
NMI: 0 0
LOC: 171386 171390
ERR: 8524
MIS: 0
[-- Attachment #6: lsmod --]
[-- Type: text/plain, Size: 1759 bytes --]
Module Size Used by
nls_koi8_r 6400 1
nls_cp866 6400 1
vfat 13568 1
fat 51740 1 vfat
nls_base 8448 4 nls_koi8_r,nls_cp866,vfat,fat
usb_storage 69568 1
libusual 17424 1 usb_storage
ac 6404 0
thermal 15496 0
processor 31560 1 thermal
fan 5892 0
button 7824 0
ide_cd 39200 0
cdrom 35232 1 ide_cd
tsdev 8768 0
psmouse 38920 0
floppy 57444 0
pcspkr 4224 0
af_packet 23304 2
parport_serial 8320 0
parport_pc 39268 1 parport_serial
parport 36680 1 parport_pc
ohci_hcd 20356 0
ehci_hcd 31752 0
k8temp 6528 0
forcedeth 41988 0
usbcore 125956 5 usb_storage,libusual,ohci_hcd,ehci_hcd
hwmon 4356 1 k8temp
i2c_nforce2 8192 0
i2c_core 22144 1 i2c_nforce2
sg 34588 0
dm_mod 56984 0
rtc 14004 0
xfs 537816 2
ahci 19460 0
sata_nv 12548 0
libata 99476 2 ahci,sata_nv
sd_mod 21504 2
scsi_mod 134024 5 usb_storage,sg,ahci,libata,sd_mod
ide_disk 17280 4
ide_generic 2432 0 [permanent]
amd74xx 14748 0 [permanent]
generic 6404 0 [permanent]
ide_core 124232 6 usb_storage,ide_cd,ide_disk,ide_generic,amd74xx,generic
prev parent reply other threads:[~2007-02-08 22:45 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-01-30 21:21 Anton Gorlov
2007-01-31 9:57 ` Sergey Vlasov
2007-02-02 16:45 ` Anton Gorlov
2007-02-06 19:06 ` Anton Gorlov
2007-02-06 19:35 ` Sergey Vlasov
2007-02-06 19:55 ` Anton Gorlov
2007-02-06 20:08 ` Sergey Vlasov
2007-02-06 20:10 ` Sergey Vlasov
2007-02-06 20:19 ` Anton Gorlov
2007-03-19 20:30 ` Anton Gorlov
2007-02-06 19:57 ` Anton Gorlov
2007-02-06 20:16 ` Sergey Vlasov
2007-02-06 20:22 ` Sergey Vlasov
2007-02-06 20:26 ` Anton Gorlov
2007-02-08 22:45 ` Anton Gorlov [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=45CBA825.6020904@altlinux.ru \
--to=stalker@altlinux.ru \
--cc=hardware@altlinux.ru \
--cc=hardware@lists.altlinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
ALT Linux hardware support
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \
hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org
public-inbox-index hardware
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.hardware
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git