From: Anton Gorlov <stalker@altlinux.ru>
To: hardware@lists.altlinux.org
Subject: [Hardware] LSI SAS1064E
Date: Thu, 23 Jun 2016 15:47:57 +0300
Message-ID: <457020bf-6fd6-191e-b92d-b7fc461f1025@altlinux.ru> (raw)
Доброго дня всем.
Озадачился тут мониторингом SAS дисков.. и обнаружил что почти на всех
серверах с указанным контроллером (Logic SAS1064ET)
на портах есть ECC ошибки. Причём даже на заведомо новых дисках. В dmesg
ругани на сколько вижу нет,в отличие от smartctl.
Вот например сервер недавно только включил и поставил новый диск.
===
Vendor: IBM-ESXS
Product: ST9146853SS
Revision: B63E
User Capacity: 146,814,976,000 bytes [146 GB]
Logical block size: 512 bytes
Logical Unit id: 0x5000c500548d2f2b
Serial number: 6XM10X530000B2509A5R
Device type: disk
Transport protocol: SAS
Local Time is: Thu Jun 23 16:46:47 2016 MSK
Device supports SMART and is Enabled
Temperature Warning Enabled
SMART Health Status: OK
Current Drive Temperature: 39 C
Drive Trip Temperature: 65 C
Elements in grown defect list: 0
Vendor (Seagate) cache information
Blocks sent to initiator = 0
Vendor (Seagate/Hitachi) factory information
number of hours powered up = 2.32
number of minutes until next internal SMART test = 34
Error counter log:
Errors Corrected by Total Correction
Gigabytes Total
ECC rereads/ errors algorithm
processed uncorrected
fast | delayed rewrites corrected invocations [10^9
bytes] errors
read: 6021031 0 0 6021031 0
0.030 0
write: 0 0 0 0 0
150.153 0
verify: 145317 0 0 145317 0
0.057 0
Non-medium error count: 0
No self-tests have been logged
Long (extended) Self Test duration: 1099 seconds [18.3 minutes]
next reply other threads:[~2016-06-23 12:47 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-23 12:47 Anton Gorlov [this message]
2016-06-23 13:35 ` Konstantin Lepikhov
2016-06-23 13:45 ` Anton Gorlov
2016-06-23 14:49 ` Konstantin Lepikhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=457020bf-6fd6-191e-b92d-b7fc461f1025@altlinux.ru \
--to=stalker@altlinux.ru \
--cc=hardware@lists.altlinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
ALT Linux hardware support
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \
hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org
public-inbox-index hardware
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.hardware
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git