* [Hardware] Lexmark Z615 @ 2006-07-28 15:45 Andrii Dobrovol`s`kii 2006-07-28 16:24 ` Andrii Dobrovol`s`kii 0 siblings, 1 reply; 8+ messages in thread From: Andrii Dobrovol`s`kii @ 2006-07-28 15:45 UTC (permalink / raw) To: hardware [-- Attachment #1: Type: text/plain, Size: 563 bytes --] Hi, У кого есть опыт и пакеты подключения Lexmark Z615 или аналогичных, поделитесь? То что лежит на сайте лексмарка не раззиповывается с криками, что это не зипархив. А подключить железку нужно. -- Rgrds, Andriy ********************************************************************* email: dobr at iop dot kiev dot ua Kyiv, Ukraine Phone: (380-44) 525-7824 Department of Gas Electronics Fax: (380-44) 525-2329 Institute of Physics of NASU *********************dobrATjabber.iop.kiev.ua************************ [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 189 bytes --] ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Hardware] Lexmark Z615 2006-07-28 15:45 [Hardware] Lexmark Z615 Andrii Dobrovol`s`kii @ 2006-07-28 16:24 ` Andrii Dobrovol`s`kii 2006-07-28 16:52 ` Sergey Vlasov 0 siblings, 1 reply; 8+ messages in thread From: Andrii Dobrovol`s`kii @ 2006-07-28 16:24 UTC (permalink / raw) To: hardware [-- Attachment #1: Type: text/plain, Size: 731 bytes --] Andrii Dobrovol`s`kii пишет: > Hi, > У кого есть опыт и пакеты подключения Lexmark Z615 или аналогичных, > поделитесь? То что лежит на сайте лексмарка не раззиповывается с > криками, что это не зипархив. А подключить железку нужно. > Нашел и подключил. :) Правда, опять методом "топора". Интересно, можно из чужого рпм не имея сырцов и спека сделать родной? -- Rgrds, Andriy ********************************************************************* email: dobr at iop dot kiev dot ua Kyiv, Ukraine Phone: (380-44) 525-7824 Department of Gas Electronics Fax: (380-44) 525-2329 Institute of Physics of NASU *********************dobrATjabber.iop.kiev.ua************************ [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 189 bytes --] ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Hardware] Lexmark Z615 2006-07-28 16:24 ` Andrii Dobrovol`s`kii @ 2006-07-28 16:52 ` Sergey Vlasov 2007-11-27 16:28 ` Gennadiy Redko 0 siblings, 1 reply; 8+ messages in thread From: Sergey Vlasov @ 2006-07-28 16:52 UTC (permalink / raw) To: hardware [-- Attachment #1: Type: text/plain, Size: 552 bytes --] On Fri, Jul 28, 2006 at 07:24:04PM +0300, Andrii Dobrovol`s`kii wrote: [...] > Интересно, можно из чужого рпм не имея сырцов и спека сделать > родной? Если достаточно будет переложить файлы в нужные места, написать скрипты и зависимости - можно сделать что-то типа: %setup -T -c rpm2cpio %SOURCE0 | cpio -idmv --no-absolute-filenames --no-preserve-owner %setup -D -T Подобным образом у нас раньше паковался fglrx_glx (правда, потом в ATI перестали делать rpm под нужный нам X, и пришлось собирать пакет из их громадного инсталятора). [-- Attachment #2: Type: application/pgp-signature, Size: 191 bytes --] ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Hardware] Lexmark Z615 2006-07-28 16:52 ` Sergey Vlasov @ 2007-11-27 16:28 ` Gennadiy Redko 2007-11-27 16:31 ` Andriy Dobrovol`s`kii 0 siblings, 1 reply; 8+ messages in thread From: Gennadiy Redko @ 2007-11-27 16:28 UTC (permalink / raw) To: hardware <skip> На днях пришлось устанавливать Lexmark Z617 под ALD 4.0 Процедура теперь несколько отличается от: http://faq.altlinux.ru/index.php?dist=0&cat=0&kwd=lexmark&type=keyword&from_year=0&from_month=0&from_day=0&to_year=0&to_month=0&to_day=0&inq=1&ina=1&f=0&action=search&button=1 1. Сам драйвер сейчас лежит здесь: http://downloads.lexmark.com//cgi-perl/downloads.cgi?ccs=229:1:0:389&fileID=1151 2. Скрипт z600cups-1.0-1.gz.sh, который получается после распаковки CJLZ600LE-CUPS-1.0-1.TAR.gz сам распаковываться не хочет, т. к. ему нужны старые libtcl-, libtk- и еще чего-то. Проще воспользоваться строчкой из : http://kubuntu.ru/lexmark-z600 tail -n +143 z600cups-1.0-1.gz.sh > install.tar.gz tar -xvzf install.tar.gz А потом - дальше по FAQу. ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Hardware] Lexmark Z615 2007-11-27 16:28 ` Gennadiy Redko @ 2007-11-27 16:31 ` Andriy Dobrovol`s`kii 2007-11-27 17:14 ` Gennadiy Redko 0 siblings, 1 reply; 8+ messages in thread From: Andriy Dobrovol`s`kii @ 2007-11-27 16:31 UTC (permalink / raw) To: hardware Нужно соответственно исправить FAQ. Забросите корректуру Михаилу? On Nov 27, 2007 6:28 PM, Gennadiy Redko <uit1@zaz.zp.ua> wrote: > <skip> > На днях пришлось устанавливать Lexmark Z617 под ALD 4.0 > Процедура теперь несколько отличается от: > http://faq.altlinux.ru/index.php?dist=0&cat=0&kwd=lexmark&type=keyword&from_year=0&from_month=0&from_day=0&to_year=0&to_month=0&to_day=0&inq=1&ina=1&f=0&action=search&button=1 > 1. Сам драйвер сейчас лежит здесь: > http://downloads.lexmark.com//cgi-perl/downloads.cgi?ccs=229:1:0:389&fileID=1151 > 2. Скрипт z600cups-1.0-1.gz.sh, который получается после распаковки > CJLZ600LE-CUPS-1.0-1.TAR.gz сам распаковываться не хочет, т. к. ему > нужны старые libtcl-, libtk- и еще чего-то. > > Проще воспользоваться строчкой из : > http://kubuntu.ru/lexmark-z600 > > tail -n +143 z600cups-1.0-1.gz.sh > install.tar.gz > > tar -xvzf install.tar.gz > > А потом - дальше по FAQу. > > > > _______________________________________________ > Hardware mailing list > Hardware@lists.altlinux.org > https://lists.altlinux.org/mailman/listinfo/hardware -- Regards, Andrii Dobrovol`s`kyj ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Hardware] Lexmark Z615 2007-11-27 16:31 ` Andriy Dobrovol`s`kii @ 2007-11-27 17:14 ` Gennadiy Redko 2007-11-27 17:44 ` Gennadiy Redko 0 siblings, 1 reply; 8+ messages in thread From: Gennadiy Redko @ 2007-11-27 17:14 UTC (permalink / raw) To: hardware [-- Attachment #1: Type: text/plain, Size: 1146 bytes --] Andriy Dobrovol`s`kii пишет: > Нужно соответственно исправить FAQ. Забросите корректуру Михаилу? Так - пойдет? Тестировалось на ALD4.0.1 и "Сизифе" от 27.11.07 Установочный скрипт Lexmark хочет старые версии libtcl- libtk- и поэтому сам rpm-ы с PPD принтеров не распаковывает. Поэтому предлагается другая процедура установки: Загружаем драйвер с : http://downloads.lexmark.com//cgi-perl/downloads.cgi?ccs=229:1:0:389&fileID=1151 или прямая ссылка: http://www.downloaddelivery.com/srfilecache/CJLZ600LE-CUPS-1.0-1.TAR.gz Далее выполняем со скачанным архивом следующие действия: #tar -zxpvf CJLZ600LE-CUPS-1.0-1.TAR.gz #tail -n +143 z600cups-1.0-1.gz.sh > install.tar.gz #tar -xvzf install.tar.gz #rpm -ihv *.rpm --nodeps Или запускаем приаттаченный скрипт. Потом "KDE menu" --> "Настройка" --> "Настройка печати" Добавляем принтер "Lexmark Z600 v1.0-1(en)" Перестартовываем cups: #service cups restart Все. Используемые ссылки: http://faq.altlinux.ru/index.php?dist=0&cat=0&kwd=lexmark&type=keyword&from_year=0&from_month=0&from_day=0&to_year=0&to_month=0&to_day=0&inq=1&ina=1&f=0&action=search&button=1 http://kubuntu.ru/lexmark-z600 [-- Attachment #2: LexZ600install --] [-- Type: text/plain, Size: 150 bytes --] #!/bin/bash tar -zxpvf CJLZ600LE-CUPS-1.0-1.TAR.gz tail -n +143 z600cups-1.0-1.gz.sh > install.tar.gz tar -xvzf install.tar.gz rpm -ihv *.rpm --nodeps ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Hardware] Lexmark Z615 2007-11-27 17:14 ` Gennadiy Redko @ 2007-11-27 17:44 ` Gennadiy Redko 2007-11-29 19:14 ` Gennadiy Redko 0 siblings, 1 reply; 8+ messages in thread From: Gennadiy Redko @ 2007-11-27 17:44 UTC (permalink / raw) To: hardware Gennadiy Redko пишет: > Andriy Dobrovol`s`kii пишет: >> Нужно соответственно исправить FAQ. Забросите корректуру Михаилу? > Так - пойдет? Это еще не все: The following packages have unmet dependencies: z600cups: Depends: cups (>= 1:1.1.15-10) but 1.3.3-alt4 is installed #apt-get hold - не работает. Как прописАть этот пакет в /etc/apt/apt.conf в секции Hold - не соображу... ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Hardware] Lexmark Z615 2007-11-27 17:44 ` Gennadiy Redko @ 2007-11-29 19:14 ` Gennadiy Redko 0 siblings, 0 replies; 8+ messages in thread From: Gennadiy Redko @ 2007-11-29 19:14 UTC (permalink / raw) To: hardware [-- Attachment #1: Type: text/plain, Size: 1593 bytes --] Gennadiy Redko пишет: > Gennadiy Redko пишет: >> Andriy Dobrovol`s`kii пишет: >>> Нужно соответственно исправить FAQ. Забросите корректуру Михаилу? >> Так - пойдет? > Это еще не все: > > The following packages have unmet dependencies: > z600cups: Depends: cups (>= 1:1.1.15-10) but 1.3.3-alt4 is installed Вот такая инструкция и скрипт: Тестировалось на ALD4.0.1 и "Сизифе" от 27.11.07 Установочный скрипт Lexmark хочет старые версии libtcl- libtk- и поэтому сам rpm-ы с PPD принтеров не распаковывает. Поэтому предлагается другая процедура установки: Загружаем драйвер с : http://downloads.lexmark.com//cgi-perl/downloads.cgi?ccs=229:1:0:389&fileID=1151 или прямая ссылка: http://www.downloaddelivery.com/srfilecache/CJLZ600LE-CUPS-1.0-1.TAR.gz Далее скачанный архив кладем в один каталог со скриптом и запускаем скрипт с правами суперпользователя: #bash ./LexZ600install Результатом выполнения скрипта будет .PPD файл описания принтера в текущем каталоге. Потом "KDE menu" --> "Настройка" --> "Настройка печати" В мастере установки принтера выбираем установку из PPD-файла описания принтера В качестве файла указываем полученный Lexmark-Z600-lxz600cj-cups.ppd Перестартовываем cups: #service cups restart Все. Скрипт получился кривой. Но какой драйвер - такой и скрипт :( Прошу не пинать. Используемые ссылки: http://faq.altlinux.ru/index.php?dist=0&cat=0&kwd=lexmark&type=keyword&from_year=0&from_month=0&from_day=0&to_year=0&to_month=0&to_day=0&inq=1&ina=1&f=0&action=search&button=1 http://kubuntu.ru/lexmark-z600 Проверьте, пожалуйста, у кого есть такая возможность. [-- Attachment #2: LexZ600install --] [-- Type: text/plain, Size: 385 bytes --] #!/bin/bash mkdir ./tmp cd ./tmp tar -zxpvf ../CJLZ600LE-CUPS-1.0-1.TAR.gz tail -n +143 z600cups-1.0-1.gz.sh > install.tar.gz tar -xvzf ./install.tar.gz rpm -ihv z600cups-1.0-1.i386.rpm --nodeps cp /usr/share/cups/model/Lexmark-Z600-lxz600cj-cups.ppd.gz ./ rpm -e z600cups-1.0-1 gzip -d ./Lexmark-Z600-lxz600cj-cups.ppd.gz cp ./Lexmark-Z600-lxz600cj-cups.ppd ../ cd ../ rm -rf ./tmp ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2007-11-29 19:14 UTC | newest] Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2006-07-28 15:45 [Hardware] Lexmark Z615 Andrii Dobrovol`s`kii 2006-07-28 16:24 ` Andrii Dobrovol`s`kii 2006-07-28 16:52 ` Sergey Vlasov 2007-11-27 16:28 ` Gennadiy Redko 2007-11-27 16:31 ` Andriy Dobrovol`s`kii 2007-11-27 17:14 ` Gennadiy Redko 2007-11-27 17:44 ` Gennadiy Redko 2007-11-29 19:14 ` Gennadiy Redko
ALT Linux hardware support This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \ hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org public-inbox-index hardware Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.hardware AGPL code for this site: git clone https://public-inbox.org/public-inbox.git