* [Hardware] Принтер для производственного помещения.
@ 2006-07-26 6:44 Gennadiy Redko
2006-07-26 7:44 ` [Hardware] *****SPAM***** " Andrii Dobrovol`s`kii
2006-07-26 14:18 ` Michael Shigorin
0 siblings, 2 replies; 11+ messages in thread
From: Gennadiy Redko @ 2006-07-26 6:44 UTC (permalink / raw)
To: hardware
Добрый день.
Подскажите принтер для производственного помещения беспроблемный
и достаточно быстрый при печати из cups.
Лазерник не пойдет, т. к. у него 10-15 сек греется барабан.
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Hardware] *****SPAM***** Принтер для производственного помещения.
2006-07-26 6:44 [Hardware] Принтер для производственного помещения Gennadiy Redko
@ 2006-07-26 7:44 ` Andrii Dobrovol`s`kii
2006-07-26 12:46 ` Gennadiy Redko
2006-07-26 14:18 ` Michael Shigorin
1 sibling, 1 reply; 11+ messages in thread
From: Andrii Dobrovol`s`kii @ 2006-07-26 7:44 UTC (permalink / raw)
To: hardware
[-- Attachment #1: Type: text/plain, Size: 664 bytes --]
Gennadiy Redko пишет:
> Добрый день.
> Подскажите принтер для производственного помещения беспроблемный
> и достаточно быстрый при печати из cups.
>
> Лазерник не пойдет, т. к. у него 10-15 сек греется барабан.
Так это смотря что печатать... И если шум до лампочки, то, возможно,
матричный?
--
Rgrds,
Andriy
*********************************************************************
email: dobr at iop dot kiev dot ua Kyiv, Ukraine
Phone: (380-44) 525-7824 Department of Gas Electronics
Fax: (380-44) 525-2329 Institute of Physics of NASU
*********************dobrATjabber.iop.kiev.ua************************
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Hardware] *****SPAM***** Принтер для производственного помещения.
2006-07-26 7:44 ` [Hardware] *****SPAM***** " Andrii Dobrovol`s`kii
@ 2006-07-26 12:46 ` Gennadiy Redko
2006-07-26 13:35 ` [Hardware] *****SPAM***** " Andrii Dobrovol`s`kii
0 siblings, 1 reply; 11+ messages in thread
From: Gennadiy Redko @ 2006-07-26 12:46 UTC (permalink / raw)
To: hardware
Andrii Dobrovol`s`kii пишет:
> Gennadiy Redko пишет:
>> Добрый день.
>> Подскажите принтер для производственного помещения беспроблемный
>> и достаточно быстрый при печати из cups.
>>
>> Лазерник не пойдет, т. к. у него 10-15 сек греется барабан.
> Так это смотря что печатать... И если шум до лампочки, то, возможно,
> матричный?
>
Может быть.
Но какой?
Мы пробуем Epson-Lq 630
Но он страницу A4 печатает около 80 сек.
А нужно - около 30 сек.
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Hardware] *****SPAM***** Re: *****SPAM***** Принтер для производственного помещения.
2006-07-26 12:46 ` Gennadiy Redko
@ 2006-07-26 13:35 ` Andrii Dobrovol`s`kii
2006-07-26 13:48 ` Dmitriy L. Kruglikov
2006-07-26 13:54 ` [Hardware] " Gennadiy Redko
0 siblings, 2 replies; 11+ messages in thread
From: Andrii Dobrovol`s`kii @ 2006-07-26 13:35 UTC (permalink / raw)
To: hardware
[-- Attachment #1: Type: text/plain, Size: 1036 bytes --]
Gennadiy Redko пишет:
> Andrii Dobrovol`s`kii пишет:
>> Gennadiy Redko пишет:
>>> Добрый день.
>>> Подскажите принтер для производственного помещения беспроблемный
>>> и достаточно быстрый при печати из cups.
>>>
>>> Лазерник не пойдет, т. к. у него 10-15 сек греется барабан.
>> Так это смотря что печатать... И если шум до лампочки, то, возможно,
>> матричный?
>>
> Может быть.
> Но какой?
> Мы пробуем Epson-Lq 630
> Но он страницу A4 печатает около 80 сек.
> А нужно - около 30 сек.
Увы. Я не знаю какой. Я давно лазерниками пользуюсь, в офисе... :)
А что говорит по этому поводу "великий и всезнающий" Гугль? Ваше
желание в принципе удовлетворимо?
--
Rgrds,
Andriy
*********************************************************************
email: dobr at iop dot kiev dot ua Kyiv, Ukraine
Phone: (380-44) 525-7824 Department of Gas Electronics
Fax: (380-44) 525-2329 Institute of Physics of NASU
*********************dobrATjabber.iop.kiev.ua************************
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Hardware] *****SPAM***** Re: *****SPAM***** Принтер для производственного помещения.
2006-07-26 13:35 ` [Hardware] *****SPAM***** " Andrii Dobrovol`s`kii
@ 2006-07-26 13:48 ` Dmitriy L. Kruglikov
2006-07-26 13:54 ` [Hardware] " Gennadiy Redko
1 sibling, 0 replies; 11+ messages in thread
From: Dmitriy L. Kruglikov @ 2006-07-26 13:48 UTC (permalink / raw)
To: hardware
On Wed, 26 Jul 2006 16:35:54 +0300
Andrii Dobrovol`s`kii wrote:
> > Мы пробуем Epson-Lq 630
> > Но он страницу A4 печатает около 80 сек.
> > А нужно - около 30 сек.
У меня остались хорошие впечатления от Xerox Phaser
со встроенной сетевушкой...
Весьма шустр, все протоколы поддерживает...
В комплекте драйвера...
Сам хватает адрес по DHCP и видет в сети виндовой, и CUPS его
сразу подхватил....
Примечание: Если сразу заказывать сетевую карту, то она стоит
порядка 50 У.Е., а если потом докупать, то уже до 100 У.Е.
(У.Е. не имеет ни какого отношения к Маше Распутиной)...
--
Best regards,
Dmitriy L. Kruglikov .--.
Dmitriy.Kruglikov_at_orionagro.com.ua |@_@ |
DKR6-RIPE |!_/ |
ICQ# 13047326 // \ \
XMPP:dkr6@jabber.ru (| | )
/'\_ _/`\
Powered by Linux \___)=(___/
-- Мысль --
Microsoft только что выпустила новый продукт:
Microsoft Windows для Windows(TM).
Эмулятор Windows для платформы Windows! Всего лишь за $900!
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Hardware] Принтер для производственного помещения.
2006-07-26 13:35 ` [Hardware] *****SPAM***** " Andrii Dobrovol`s`kii
2006-07-26 13:48 ` Dmitriy L. Kruglikov
@ 2006-07-26 13:54 ` Gennadiy Redko
2006-07-26 14:24 ` Максим Ярушин
1 sibling, 1 reply; 11+ messages in thread
From: Gennadiy Redko @ 2006-07-26 13:54 UTC (permalink / raw)
To: hardware
Andrii Dobrovol`s`kii пишет:
> Gennadiy Redko пишет:
>> Andrii Dobrovol`s`kii пишет:
>>> Gennadiy Redko пишет:
>>>> Добрый день.
>>>> Подскажите принтер для производственного помещения беспроблемный
>>>> и достаточно быстрый при печати из cups.
>>>>
>>>> Лазерник не пойдет, т. к. у него 10-15 сек греется барабан.
>>> Так это смотря что печатать... И если шум до лампочки, то, возможно,
>>> матричный?
>>>
>> Может быть.
>> Но какой?
>> Мы пробуем Epson-Lq 630
>> Но он страницу A4 печатает около 80 сек.
>> А нужно - около 30 сек.
> Увы. Я не знаю какой. Я давно лазерниками пользуюсь, в офисе... :)
> А что говорит по этому поводу "великий и всезнающий" Гугль? Ваше
> желание в принципе удовлетворимо?
>
Гугль в нашем случае не может быть авторитетным источником.
Есть, скажем, linuxprinting.org который говорит, что наши pson-Lq
630 работают "великолепно".
При этом одну и ту же страницу этот принтер под виндой печатает
40 сек, а под линуксом-купсом - 70 :(
Т. е. мне нужен уже опыт эксплуатации, когда важны такие
характеристики, как скорость печати, подачи и пр.
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Hardware] Принтер для производственного помещения.
2006-07-26 13:54 ` [Hardware] " Gennadiy Redko
@ 2006-07-26 14:24 ` Максим Ярушин
2006-07-26 14:28 ` Gennadiy Redko
0 siblings, 1 reply; 11+ messages in thread
From: Максим Ярушин @ 2006-07-26 14:24 UTC (permalink / raw)
To: hardware
On Wed, 26 Jul 2006 16:54:49 +0300
Gennadiy Redko <uit1@zaz.zp.ua> wrote:
> Гугль в нашем случае не может быть авторитетным источником.
> Есть, скажем, linuxprinting.org который говорит, что наши pson-Lq
> 630 работают "великолепно".
> При этом одну и ту же страницу этот принтер под виндой печатает
> 40 сек, а под линуксом-купсом - 70 :(
> Т. е. мне нужен уже опыт эксплуатации, когда важны такие
> характеристики, как скорость печати, подачи и пр.
Может быть Epson FX-2190?
Поддерживает PS и заявленная скорость печати 680 знаков в минуту
--
Успехов! Максим
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Hardware] Принтер для производственного помещения.
2006-07-26 14:24 ` Максим Ярушин
@ 2006-07-26 14:28 ` Gennadiy Redko
0 siblings, 0 replies; 11+ messages in thread
From: Gennadiy Redko @ 2006-07-26 14:28 UTC (permalink / raw)
To: hardware
Максим Ярушин пишет:
> On Wed, 26 Jul 2006 16:54:49 +0300
> Gennadiy Redko <uit1@zaz.zp.ua> wrote:
>
>> Гугль в нашем случае не может быть авторитетным источником.
>> Есть, скажем, linuxprinting.org который говорит, что наши pson-Lq
>> 630 работают "великолепно".
>> При этом одну и ту же страницу этот принтер под виндой печатает
>> 40 сек, а под линуксом-купсом - 70 :(
>> Т. е. мне нужен уже опыт эксплуатации, когда важны такие
>> характеристики, как скорость печати, подачи и пр.
>
> Может быть Epson FX-2190?
> Поддерживает PS и заявленная скорость печати 680 знаков в минуту
>
Это в текстовом режиме, когда используются фонты принтера.
А если ПДФ им печатать к примеру - сможет он книжный А4 за 30
сек отпечатать?
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Hardware] Принтер для производственного помещения.
2006-07-26 6:44 [Hardware] Принтер для производственного помещения Gennadiy Redko
2006-07-26 7:44 ` [Hardware] *****SPAM***** " Andrii Dobrovol`s`kii
@ 2006-07-26 14:18 ` Michael Shigorin
2006-07-26 14:34 ` Gennadiy Redko
1 sibling, 1 reply; 11+ messages in thread
From: Michael Shigorin @ 2006-07-26 14:18 UTC (permalink / raw)
To: hardware
On Wed, Jul 26, 2006 at 09:44:32AM +0300, Gennadiy Redko wrote:
> Подскажите принтер для производственного помещения
> беспроблемный и достаточно быстрый при печати из cups.
> Лазерник не пойдет, т. к. у него 10-15 сек греется барабан.
DeskJet из тех, к которым приматывается бочка с краской?
(номеров тех, которые работали так 8x5, не помню -- могу
попробовать уточнить у друга)
--
---- WBR, Michael Shigorin <mike@altlinux.ru>
------ Linux.Kiev http://www.linux.kiev.ua/
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Hardware] Принтер для производственного помещения.
2006-07-26 14:18 ` Michael Shigorin
@ 2006-07-26 14:34 ` Gennadiy Redko
2006-07-26 14:40 ` Michael Shigorin
0 siblings, 1 reply; 11+ messages in thread
From: Gennadiy Redko @ 2006-07-26 14:34 UTC (permalink / raw)
To: hardware, shigorin
Michael Shigorin пишет:
> On Wed, Jul 26, 2006 at 09:44:32AM +0300, Gennadiy Redko wrote:
>> Подскажите принтер для производственного помещения
>> беспроблемный и достаточно быстрый при печати из cups.
>> Лазерник не пойдет, т. к. у него 10-15 сек греется барабан.
>
> DeskJet из тех, к которым приматывается бочка с краской?
> (номеров тех, которые работали так 8x5, не помню -- могу
> попробовать уточнить у друга)
>
Это быстро работает и легко обслуживается?
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Hardware] Принтер для производственного помещения.
2006-07-26 14:34 ` Gennadiy Redko
@ 2006-07-26 14:40 ` Michael Shigorin
0 siblings, 0 replies; 11+ messages in thread
From: Michael Shigorin @ 2006-07-26 14:40 UTC (permalink / raw)
To: hardware
On Wed, Jul 26, 2006 at 05:34:20PM +0300, Gennadiy Redko wrote:
> >> Подскажите принтер для производственного помещения
> >> беспроблемный и достаточно быстрый при печати из cups.
> >> Лазерник не пойдет, т. к. у него 10-15 сек греется барабан.
> > DeskJet из тех, к которым приматывается бочка с краской?
> > (номеров тех, которые работали так 8x5, не помню -- могу
> > попробовать уточнить у друга)
> Это быстро работает и легко обслуживается?
У них три штуки в бухгалтерии работали практически непрерывно,
один раз за два, что ли, года в одном сгорела голова -- а так
тётеньки были обучены банки с чернилами менять самостоятельно.
По части скорости он не уточнял, надо проверять. Я как-то на
секунды тоже струйники давно не щупал, обычно при срочности
берётся лазер, как-никак...
--
---- WBR, Michael Shigorin <mike@altlinux.ru>
------ Linux.Kiev http://www.linux.kiev.ua/
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2006-07-26 14:40 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2006-07-26 6:44 [Hardware] Принтер для производственного помещения Gennadiy Redko
2006-07-26 7:44 ` [Hardware] *****SPAM***** " Andrii Dobrovol`s`kii
2006-07-26 12:46 ` Gennadiy Redko
2006-07-26 13:35 ` [Hardware] *****SPAM***** " Andrii Dobrovol`s`kii
2006-07-26 13:48 ` Dmitriy L. Kruglikov
2006-07-26 13:54 ` [Hardware] " Gennadiy Redko
2006-07-26 14:24 ` Максим Ярушин
2006-07-26 14:28 ` Gennadiy Redko
2006-07-26 14:18 ` Michael Shigorin
2006-07-26 14:34 ` Gennadiy Redko
2006-07-26 14:40 ` Michael Shigorin
ALT Linux hardware support
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \
hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org
public-inbox-index hardware
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.hardware
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git