* [Hardware] контроллер IDE/SATA
@ 2006-05-18 9:09 Anton Gorlov
2006-05-18 12:45 ` Michael Shigorin
0 siblings, 1 reply; 7+ messages in thread
From: Anton Gorlov @ 2006-05-18 9:09 UTC (permalink / raw)
To: hardware
Понадобилось организовать небольшую файлопомойку со средней загрузкой
(хранится будт драйвера,софт).
Вопрос -что из этих 2 железлк выбрать (как всегда..нажо сэкономить на
спичках)
1) IDE STLab A142
2) SATA STLab A213
Использоваться скорее всего будут как софт-рейд на зералирование.
--
np: silence
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Hardware] контроллер IDE/SATA
2006-05-18 9:09 [Hardware] контроллер IDE/SATA Anton Gorlov
@ 2006-05-18 12:45 ` Michael Shigorin
2006-05-18 12:53 ` Anton Gorlov
0 siblings, 1 reply; 7+ messages in thread
From: Michael Shigorin @ 2006-05-18 12:45 UTC (permalink / raw)
To: hardware
On Thu, May 18, 2006 at 01:09:24PM +0400, Anton Gorlov wrote:
> Понадобилось организовать небольшую файлопомойку со средней
> загрузкой (хранится будт драйвера,софт). Использоваться скорее
> всего будут как софт-рейд на зералирование.
SATA
--
---- WBR, Michael Shigorin <mike@altlinux.ru>
------ Linux.Kiev http://www.linux.kiev.ua/
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Hardware] контроллер IDE/SATA
2006-05-18 12:45 ` Michael Shigorin
@ 2006-05-18 12:53 ` Anton Gorlov
2006-05-18 12:58 ` Michael Shigorin
0 siblings, 1 reply; 7+ messages in thread
From: Anton Gorlov @ 2006-05-18 12:53 UTC (permalink / raw)
To: hardware, shigorin
Michael Shigorin пишет:
>> Понадобилось организовать небольшую файлопомойку со средней
>> загрузкой (хранится будт драйвера,софт). Использоваться скорее
>> всего будут как софт-рейд на зералирование.
> SATA
Там матсер 2.4 стоит..и когда я там буду что-то менять - мне не известно
(по приоритету стоит в самом низу почти).. а на сколько знаю в мастере
дела с сата не очень обстоят. :-/
--
np: silence
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Hardware] контроллер IDE/SATA
2006-05-18 12:53 ` Anton Gorlov
@ 2006-05-18 12:58 ` Michael Shigorin
2006-05-18 13:23 ` Anton Gorlov
0 siblings, 1 reply; 7+ messages in thread
From: Michael Shigorin @ 2006-05-18 12:58 UTC (permalink / raw)
To: hardware
On Thu, May 18, 2006 at 04:53:56PM +0400, Anton Gorlov wrote:
> >>Понадобилось организовать небольшую файлопомойку со средней
> >>загрузкой (хранится будт драйвера,софт). Использоваться
> >>скорее всего будут как софт-рейд на зералирование.
> >SATA
> Там матсер 2.4 стоит..и когда я там буду что-то менять - мне не
> известно (по приоритету стоит в самом низу почти).. а на
> сколько знаю в мастере дела с сата не очень обстоят. :-/
Да ладно. За спиной на K8T800+SiI3112 как раз 2.4, на некоторых
других тоже обкатывалось. SiI3114 возьми, там четыре шнурка,
если предвидится расширение по дискам (есть место под них).
На файлопомойки оно симпатичнее IDE по вопросам шнурков и
апгрейдабельности, некоторые из тех, кому доверяю, упоминали
и более мягкую работу под нагрузкой (это _без_ NCQ).
--
---- WBR, Michael Shigorin <mike@altlinux.ru>
------ Linux.Kiev http://www.linux.kiev.ua/
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Hardware] контроллер IDE/SATA
2006-05-18 12:58 ` Michael Shigorin
@ 2006-05-18 13:23 ` Anton Gorlov
2006-05-18 14:14 ` Michael Shigorin
2006-05-18 14:53 ` Andrei Bulava
0 siblings, 2 replies; 7+ messages in thread
From: Anton Gorlov @ 2006-05-18 13:23 UTC (permalink / raw)
To: hardware, shigorin
Michael Shigorin пишет:
> Да ладно. За спиной на K8T800+SiI3112 как раз 2.4, на некоторых
> других тоже обкатывалось. SiI3114 возьми, там четыре шнурка,
> если предвидится расширение по дискам (есть место под них).
> На файлопомойки оно симпатичнее IDE по вопросам шнурков и
> апгрейдабельности, некоторые из тех, кому доверяю, упоминали
> и более мягкую работу под нагрузкой (это _без_ NCQ).
Каким модулем цеплять эту железку?
--
np: silence
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Hardware] контроллер IDE/SATA
2006-05-18 13:23 ` Anton Gorlov
@ 2006-05-18 14:14 ` Michael Shigorin
2006-05-18 14:53 ` Andrei Bulava
1 sibling, 0 replies; 7+ messages in thread
From: Michael Shigorin @ 2006-05-18 14:14 UTC (permalink / raw)
To: hardware
On Thu, May 18, 2006 at 05:23:29PM +0400, Anton Gorlov wrote:
> >Да ладно. За спиной на K8T800+SiI3112 как раз 2.4, на
> >некоторых других тоже обкатывалось. SiI3114 возьми, там
> >четыре шнурка, если предвидится расширение по дискам (есть
> >место под них). На файлопомойки оно симпатичнее IDE по
> >вопросам шнурков и апгрейдабельности, некоторые из тех, кому
> >доверяю, упоминали и более мягкую работу под нагрузкой (это
> >_без_ NCQ).
> Каким модулем цеплять эту железку?
sata_sil
--
---- WBR, Michael Shigorin <mike@altlinux.ru>
------ Linux.Kiev http://www.linux.kiev.ua/
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Hardware] контроллер IDE/SATA
2006-05-18 13:23 ` Anton Gorlov
2006-05-18 14:14 ` Michael Shigorin
@ 2006-05-18 14:53 ` Andrei Bulava
1 sibling, 0 replies; 7+ messages in thread
From: Andrei Bulava @ 2006-05-18 14:53 UTC (permalink / raw)
To: hardware
Anton Gorlov wrote:
> Michael Shigorin пишет:
>
>> Да ладно. За спиной на K8T800+SiI3112 как раз 2.4, на некоторых
>> других тоже обкатывалось. SiI3114 возьми, там четыре шнурка,
>> если предвидится расширение по дискам (есть место под них).
>> На файлопомойки оно симпатичнее IDE по вопросам шнурков и
>> апгрейдабельности, некоторые из тех, кому доверяю, упоминали
>> и более мягкую работу под нагрузкой (это _без_ NCQ).
>
> Каким модулем цеплять эту железку?
sata_sil (который зависит от libata - это важно только при создании
initrd для загрузки с этого контроллера).
--
// AB1002-UANIC
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2006-05-18 14:53 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2006-05-18 9:09 [Hardware] контроллер IDE/SATA Anton Gorlov
2006-05-18 12:45 ` Michael Shigorin
2006-05-18 12:53 ` Anton Gorlov
2006-05-18 12:58 ` Michael Shigorin
2006-05-18 13:23 ` Anton Gorlov
2006-05-18 14:14 ` Michael Shigorin
2006-05-18 14:53 ` Andrei Bulava
ALT Linux hardware support
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \
hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org
public-inbox-index hardware
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.hardware
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git