From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <44059112.5070003@ats-manager.stc.donpac.ru> Date: Wed, 01 Mar 2006 15:18:26 +0300 From: Eugene Prokopiev User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; ru-RU; rv:1.7.12) Gecko/20050915 X-Accept-Language: ru-ru, ru, en-en, en MIME-Version: 1.0 To: hardware@altlinux.ru References: <4405625D.6050504@ats-manager.stc.donpac.ru> <20060301093318.GL26440@master.mivlgu.local> In-Reply-To: <20060301093318.GL26440@master.mivlgu.local> Content-Type: text/plain; charset=KOI8-R; format=flowed X-DSPAM-Result: Innocent X-DSPAM-Processed: Wed Mar 1 15:18:47 2006 X-DSPAM-Confidence: 1.0000 X-DSPAM-Probability: 0.0023 X-DSPAM-Signature: 103,44059127106361476310353 X-DSPAM-Factors: 27, router+0, 0.40000, #01+00178020, 0.40000, 0x1fe40300+ACPI, 0.40000, transfer+Max, 0.40000, transfer+Max, 0.40000, Link+LNKG, 0.40000, PCI+bridge, 0.40000, on+irq, 0.40000, on+irq, 0.40000, mirror+0, 0.40000, mirror+0, 0.40000, Hub, 0.40000, Hub, 0.40000, IRQ5+0, 0.40000, mdma1, 0.40000, mdma1, 0.40000, but, 0.40000, 0+10, 0.40000, 10f+blk, 0.40000, 0xe080a000, 0.40000, D, 0.40000, D, 0.40000, ICH4+Ultra, 0.40000, 8139D'+eth1, 0.40000, established, 0.40000, 06+001, 0.40000, Bridge+ACPI, 0.40000 Content-Transfer-Encoding: quoted-printable Subject: Re: [Hardware] UDMA5 X-BeenThere: hardware@lists.altlinux.org X-Mailman-Version: 2.1.6 Precedence: list Reply-To: hardware@altlinux.ru List-Id: ALT Linux hardware support List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 01 Mar 2006 12:18:48 -0000 Archived-At: List-Archive: List-Post: Sergey Vlasov =D0=C9=DB=C5=D4: > On Wed, Mar 01, 2006 at 11:59:09AM +0300, Eugene Prokopiev wrote: >=20 >>=E5=D3=D4=D8 2 =D7=C9=CE=D4=C1, =D0=D2=CF =CB=CF=D4=CF=D2=D9=C8 =D7 =C2= =C9=CF=D3=C5 =CE=C1=D0=C9=D3=C1=CE=CF: >> >>Drive Installed: ST40014A >>PIO Mode: Mode 4 >>Ultra DMA: Mode 5 >>Cable Detected: 80 Conductor >> >>=EF=C4=CE=C1=CB=CF: >> >># hdparm -i /dev/hda >=20 >=20 > =E1 hdparm -I =DE=D4=CF =D0=C9=DB=C5=D4? >=20 > [skip] >=20 >># hdparm -Xudma5 /dev/hdc >> >>/dev/hdc: >> setting xfermode to 69 (UltraDMA mode5) >> HDIO_DRIVE_CMD(setxfermode) failed: Input/output error >=20 >=20 > =EB=C1=CB=CF=CA =CB=CF=CE=D4=D2=CF=CC=CC=C5=D2? lspci, dmesg? # hdparm -I /dev/hda /dev/hda: ATA device, with non-removable media Model Number: ST340014A Serial Number: 3JX1LYA5 Firmware Revision: 3.06 Standards: Used: ATA/ATAPI-6 T13 1410D revision 2 Supported: 6 5 4 3 Configuration: Logical max current cylinders 16383 65535 heads 16 1 sectors/track 63 63 -- CHS current addressable sectors: 4128705 LBA user addressable sectors: 78165360 LBA48 user addressable sectors: 78165360 device size with M =3D 1024*1024: 38166 MBytes device size with M =3D 1000*1000: 40020 MBytes (40 GB) Capabilities: LBA, IORDY(can be disabled) bytes avail on r/w long: 4 Queue depth: 1 Standby timer values: spec'd by Standard R/W multiple sector transfer: Max =3D 16 Current =3D 16 Recommended acoustic management value: 128, current value: 0 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5 Cycle time: min=3D120ns recommended=3D120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=3D240ns IORDY flow control=3D1= 20ns Commands/features: Enabled Supported: * READ BUFFER cmd * WRITE BUFFER cmd * Host Protected Area feature set * Look-ahead * Write cache * Power Management feature set Security Mode feature set * SMART feature set * FLUSH CACHE EXT command * Mandatory FLUSH CACHE command * Device Configuration Overlay feature set * 48-bit Address feature set SET MAX security extension * DOWNLOAD MICROCODE cmd * SMART self-test * SMART error logging Security: supported not enabled not locked frozen not expired: security count not supported: enhanced erase HW reset results: CBLID- above Vih Device num =3D 0 determined by the jumper Checksum: correct # hdparm -I /dev/hdc /dev/hdc: ATA device, with non-removable media Model Number: ST340014A Serial Number: 5JXKSS6C Firmware Revision: 8.01 Standards: Used: ATA/ATAPI-6 T13 1410D revision 2 Supported: 6 5 4 3 Configuration: Logical max current cylinders 16383 65535 heads 16 1 sectors/track 63 63 -- CHS current addressable sectors: 4128705 LBA user addressable sectors: 78165360 LBA48 user addressable sectors: 78165360 device size with M =3D 1024*1024: 38166 MBytes device size with M =3D 1000*1000: 40020 MBytes (40 GB) Capabilities: LBA, IORDY(can be disabled) bytes avail on r/w long: 4 Queue depth: 1 Standby timer values: spec'd by Standard, no device specific=20 minimum R/W multiple sector transfer: Max =3D 16 Current =3D 16 Recommended acoustic management value: 128, current value: 0 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5 Cycle time: min=3D120ns recommended=3D120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=3D240ns IORDY flow control=3D1= 20ns Commands/features: Enabled Supported: * READ BUFFER cmd * WRITE BUFFER cmd * Host Protected Area feature set * Look-ahead * Write cache * Power Management feature set Security Mode feature set * SMART feature set * FLUSH CACHE EXT command * Mandatory FLUSH CACHE command * Device Configuration Overlay feature set * 48-bit Address feature set SET MAX security extension * DOWNLOAD MICROCODE cmd * General Purpose Logging feature set * SMART self-test * SMART error logging Security: Master password revision code =3D 65534 supported not enabled not locked frozen not expired: security count not supported: enhanced erase HW reset results: CBLID- below Vih Device num =3D 0 determined by the jumper Checksum: correct =EE=CF: # hdparm -i /dev/hda /dev/hda: Model=3DST340014A, FwRev=3D3.06, SerialNo=3D3JX1LYA5 Config=3D{ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% } RawCHS=3D16383/16/63, TrkSize=3D0, SectSize=3D0, ECCbytes=3D4 BuffType=3Dunknown, BuffSize=3D2048kB, MaxMultSect=3D16, MultSect=3D16 CurCHS=3D16383/16/63, CurSects=3D16514064, LBA=3Dyes, LBAsects=3D781653= 60 IORDY=3Don/off, tPIO=3D{min:240,w/IORDY:120}, tDMA=3D{min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 AdvancedPM=3Dno WriteCache=3Denabled Drive conforms to: ATA/ATAPI-6 T13 1410D revision 2: * signifies the current active mode # hdparm -i /dev/hdc /dev/hdc: Model=3DST340014A, FwRev=3D8.01, SerialNo=3D5JXKSS6C Config=3D{ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% } RawCHS=3D16383/16/63, TrkSize=3D0, SectSize=3D0, ECCbytes=3D4 BuffType=3Dunknown, BuffSize=3D2048kB, MaxMultSect=3D16, MultSect=3D16 CurCHS=3D16383/16/63, CurSects=3D16514064, LBA=3Dyes, LBAsects=3D781653= 60 IORDY=3Don/off, tPIO=3D{min:240,w/IORDY:120}, tDMA=3D{min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 AdvancedPM=3Dno WriteCache=3Denabled Drive conforms to: ATA/ATAPI-6 T13 1410D revision 2: * signifies the current active mode # lspci 00:00.0 Host bridge: Intel Corp. 82845G/GL[Brookdale-G]/GE/PE DRAM=20 Controller/Host-Hub Interface (rev 01) 00:02.0 VGA compatible controller: Intel Corp. 82845G/GL[Brookdale-G]/GE=20 Chipset Integrated Graphics Device (rev 01) 00:1d.0 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #1 (rev 01) 00:1d.1 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #2 (rev 01) 00:1d.2 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #3 (rev 01) 00:1d.7 USB Controller: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller=20 (rev 01) 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub interface to PCI=20 Bridge (rev 81) 00:1f.0 ISA bridge: Intel Corp. 82801DB (ICH4) LPC Bridge (rev 01) 00:1f.1 IDE interface: Intel Corp. 82801DB (ICH4) Ultra ATA 100 Storage=20 Controller (rev 01) 00:1f.3 SMBus: Intel Corp. 82801DB/DBM (ICH4) SMBus Controller (rev 01) 00:1f.5 Multimedia audio controller: Intel Corp. 82801DB (ICH4) AC'97=20 Audio Controller (rev 01) 01:00.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado]=20 (rev 78) 01:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd.=20 RTL-8139/8139C/8139C+ (rev 10) # dmesg 2.3 present. 62 structures occupying 2310 bytes. DMI table at 0x000FC610. BIOS Vendor: Intel Corp. BIOS Version: LY84510A.86A.0029.P11.0212121810 BIOS Release: 12/12/2002 System Vendor: Product Name: Version: Serial Number: Board Vendor: Intel Corporation Board Name: D845GLAD Board Version: AAA86713-207 ACPI: RSDP (v000 ACPIAM ) @ 0x000f7210 ACPI: RSDT (v001 INTEL D845GLAD 0x12000212 MSFT 0x00000097) @ 0x1fe40000 ACPI: FADT (v002 INTEL D845GLAD 0x12000212 MSFT 0x00000097) @ 0x1fe40200 ACPI: MADT (v001 INTEL D845GLAD 0x12000212 MSFT 0x00000097) @ 0x1fe40300 ACPI: ASF! (v016 AMIASF I845GASF 0x00000001 MSFT 0x0100000d) @ 0x1fe444b0 ACPI: DSDT (v001 INTEL D845GLAD 0x0000010a MSFT 0x0100000d) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 Pentium 4(tm) XEON(tm) APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] global_irq_base[0x0]) IOAPIC[0]: Assigned apic_id 1 IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, IRQ 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Using ACPI (MADT) for SMP configuration information Kernel command line: auto BOOT_IMAGE=3Dlinux-smp ro root=3D3a00 ramdisk=3D= 8192=20 splash=3Doff Initializing CPU#0 Detected 2399.770 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 4784.12 BogoMIPS Memory: 511496k/522496k available (1358k kernel code, 10612k reserved,=20 542k data, 152k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Hyper-Threading is disabled Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Hyper-Threading is disabled Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07 per-CPU timeslice cutoff: 1462.99 usecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Error: only one processor found. ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 1-0, 1-16, 1-17, 1-18, 1-19, 1-20, 1-21, 1-22,=20 1-23 not connected. ..TIMER: vector=3D0x31 pin1=3D2 pin2=3D-1 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2399.7104 MHz. ..... host bus clock speed is 99.9878 MHz. cpu: 0, clocks: 999878, slice: 499939 CPU0 Waiting on wait_init_idle (map =3D 0x0) All processors have done init_idle ACPI: Subsystem revision 20040326 PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3D1 PCI: Using configuration type 1 Looking for DSDT in initrd ... not found! ACPI-1132: *** Error: Method execution failed [\GPRW] (Node=20 c160da20), AE_NOT_EXIST ACPI-1132: *** Error: Method execution failed=20 [\_SB_.PCI0.P0P1._PRW] (Node c160dda0), AE_NOT_EXIST ACPI-0153: *** Error: Method execution failed=20 [\_SB_.PCI0.P0P1._PRW] (Node c160dda0), AE_NOT_EXIST ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: System [ACPI] (supports S0 S1 S4 S5) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: Power Resource [URP1] (off) ACPI: Power Resource [URP2] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,=20 disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) PCI: Probing PCI hardware 00:00:1d[A] -> 1-16 -> IRQ 16 level low 00:00:1d[B] -> 1-19 -> IRQ 19 level low 00:00:1d[C] -> 1-18 -> IRQ 18 level low 00:00:1d[D] -> 1-23 -> IRQ 23 level low 00:00:1f[B] -> 1-17 -> IRQ 17 level low 00:01:08[A] -> 1-20 -> IRQ 20 level low 00:01:00[A] -> 1-21 -> IRQ 21 level low 00:01:00[B] -> 1-22 -> IRQ 22 level low number of MP IRQ sources: 15. number of IO-APIC #1 registers: 24. testing the IO APIC....................... IO APIC #1...... .... register #00: 01000000 ....... : physical APIC id: 01 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 00000000 ....... : arbitration: 00 .... register #03: 00000001 ....... : Boot DT : 1 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 0 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 0 1 0 0 0 1 1 71 0a 001 01 0 0 0 0 0 1 1 79 0b 001 01 0 0 0 0 0 1 1 81 0c 001 01 0 0 0 0 0 1 1 89 0d 001 01 0 0 0 0 0 1 1 91 0e 001 01 0 0 0 0 0 1 1 99 0f 001 01 0 0 0 0 0 1 1 A1 10 001 01 1 1 0 1 0 1 1 A9 11 001 01 1 1 0 1 0 1 1 C9 12 001 01 1 1 0 1 0 1 1 B9 13 001 01 1 1 0 1 0 1 1 B1 14 001 01 1 1 0 1 0 1 1 D1 15 001 01 1 1 0 1 0 1 1 D9 16 001 01 1 1 0 1 0 1 1 E1 17 001 01 1 1 0 1 0 1 1 C1 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 IRQ20 -> 0:20 IRQ21 -> 0:21 IRQ22 -> 0:22 IRQ23 -> 0:23 .................................... done. PCI: Using ACPI for IRQ routing Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd kinoded started VFS: Disk quotas vdquot_6.5.1 vesafb: framebuffer at 0xf0000000, mapped to 0xe080a000, size 832k vesafb: mode is 640x480x16, linelength=3D1280, pages=3D0 vesafb: protected mode interface info at a5f3:1f5f vesafb: scrolling: redraw vesafb: directcolor: size=3D0:5:6:5, shift=3D0:11:5:0 Looking for splash picture... no good signature found. Console: switching to colour frame buffer device 80x30 fb0: VESA VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT=20 SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq =3D 4) is a 16550A ttyS01 at 0x02f8 (irq =3D 3) is a 16550A NET4: Frame Diverter 0.46 RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=3D= xx ICH4: IDE controller at PCI slot 00:1f.1 PCI: Enabling device 00:1f.1 (0005 -> 0007) ICH4: chipset revision 1 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio hda: ST340014A, ATA DISK drive blk: queue c036c7e0, I/O limit 4095Mb (mask 0xffffffff) hdc: ST340014A, ATA DISK drive blk: queue c036cc50, I/O limit 4095Mb (mask 0xffffffff) ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area =3D> 1 hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=3D4865/255/63, UDMA= (100) hdc: attached ide-disk driver. hdc: host protected area =3D> 1 hdc: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=3D4865/255/63, UDMA= (100) Partition check: hda: hda1 hda2 hda3 hdc: hdc1 hdc2 hdc3 md: md driver 0.90.0 MAX_MD_DEVS=3D256, MD_SB_DISKS=3D27 md: Autodetecting RAID arrays. [events: 0000002b] [events: 0000002b] [events: 0000002b] [events: 0000002b] md: autorun ... md: considering hdc3 ... md: adding hdc3 ... md: adding hda3 ... md: created md1 md: bind md: bind md: running: md: hdc3's event counter: 0000002b md: hda3's event counter: 0000002b md: md1: raid array is not clean -- starting background reconstruction kmod: failed to exec /sbin/modprobe -s -k md-personality-3, errno =3D 2 md: personality 3 is not loaded! md :do_md_run() returned -22 md: md1 stopped. md: unbind md: export_rdev(hdc3) md: unbind md: export_rdev(hda3) md: considering hdc1 ... md: adding hdc1 ... md: adding hda1 ... md: created md0 md: bind md: bind md: running: md: hdc1's event counter: 0000002b md: hda1's event counter: 0000002b kmod: failed to exec /sbin/modprobe -s -k md-personality-3, errno =3D 2 md: personality 3 is not loaded! md :do_md_run() returned -22 md: md0 stopped. md: unbind md: export_rdev(hdc1) md: unbind md: export_rdev(hda1) md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 1779k freed EXT2-fs warning: checktime reached, running e2fsck is recommended VFS: Mounted root (ext2 filesystem). SCSI subsystem driver Revision: 1.00 LVM version 1.0.8(17/11/2003) module loaded Journalled Block Device driver loaded md: raid1 personality registered as nr 3 md: Autodetecting RAID arrays. [events: 0000002b] [events: 0000002b] [events: 0000002b] [events: 0000002b] md: autorun ... md: considering hda1 ... md: adding hda1 ... md: adding hdc1 ... md: created md0 md: bind md: bind md: running: md: hda1's event counter: 0000002b md: hdc1's event counter: 0000002b md0: max total readahead window set to 124k md0: 1 data-disks, max readahead per data-disk: 124k raid1: device hda1 operational as mirror 0 raid1: device hdc1 operational as mirror 1 raid1: raid set md0 active with 2 out of 2 mirrors md: updating md0 RAID superblock on device md: hda1 [events: 0000002c]<6>(write) hda1's sb offset: 48064 md: hdc1 [events: 0000002c]<6>(write) hdc1's sb offset: 48064 md: considering hda3 ... md: adding hda3 ... md: adding hdc3 ... md: created md1 md: bind md: bind md: running: md: hda3's event counter: 0000002b md: hdc3's event counter: 0000002b md: md1: raid array is not clean -- starting background reconstruction md1: max total readahead window set to 124k md1: 1 data-disks, max readahead per data-disk: 124k raid1: device hda3 operational as mirror 0 raid1: device hdc3 operational as mirror 1 raid1: raid set md1 not clean; reconstructing mirrors raid1: raid set md1 active with 2 out of 2 mirrors md: updating md1 RAID superblock on device md: hda3 [events: 0000002c]<6>(write) hda3's sb offset: 38049856 md: syncing RAID array md1 md: minimum _guaranteed_ reconstruction speed: 100 KB/sec/disc. md: using maximum available idle IO bandwith (but not more than 100000=20 KB/sec) for reconstruction. md: using 124k window, over a total of 38049856 blocks. md: hdc3 [events: 0000002c]<6>(write) hdc3's sb offset: 38049856 md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Trying to move old root to /initrd ... failed Unmounting old root Trying to free ramdisk memory ... okay Freeing unused kernel memory: 152k freed Executing init=3D/sbin/init loop: loaded (max 8 devices) Adding Swap: 979956k swap-space (priority -1) Adding Swap: 979956k swap-space (priority -2) EXT3 FS 2.4-0.9.19, 19 August 2002 on lvm(58,0), internal journal Real Time Clock Driver v1.10f blk: queue c036c7e0, I/O limit 4095Mb (mask 0xffffffff) blk: queue c036cc50, I/O limit 4095Mb (mask 0xffffffff) hdc: Speed warnings UDMA 3/4/5 is not functional. ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Processor [CPU1] (supports C1, 8 throttling states) kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on lvm(58,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on lvm(58,2), internal journal EXT3-fs: mounted filesystem with ordered data mode. 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html See Documentation/networking/vortex.txt 01:00.0: 3Com PCI 3c905C Tornado at 0xdc00. Vers LK1.1.18-ac 00:04:79:66:6a:e8, IRQ 21 product code 464a rev 00.14 date 11-13-00 Internal config register is 1800000, transceivers 0xa. 8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface. MII transceiver found at address 24, status 782d. Enabling bus-master transmits and whole-frame receives. 01:00.0: scatter/gather enabled. h/w checksums enabled divert: allocating divert_blk for eth0 8139too Fast Ethernet driver 0.9.26 divert: allocating divert_blk for eth1 eth1: RealTek RTL8139 at 0xe0a4b800, 00:80:48:38:b6:06, IRQ 22 eth1: Identified 8139 chip type 'RTL-8100B/8139D' eth1: link up, 100Mbps, full-duplex, lpa 0x41E1 hdc: Speed warnings UDMA 3/4/5 is not functional. md: md1: sync done. md: recovery thread got woken up ... md: recovery thread finished ...