From: Eugene Prokopiev <prokopiev@stc.donpac.ru>
To: Hardware@lists.altlinux.org
Subject: [Hardware] UDMA5
Date: Wed, 01 Mar 2006 11:59:09 +0300
Message-ID: <4405625D.6050504@ats-manager.stc.donpac.ru> (raw)
Здравствуйте!
Есть 2 винта, про которых в биосе написано:
Drive Installed: ST40014A
PIO Mode: Mode 4
Ultra DMA: Mode 5
Cable Detected: 80 Conductor
Однако:
# hdparm -i /dev/hda
/dev/hda:
Model=ST340014A, FwRev=3.06, SerialNo=3JX1LYA5
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=78165360
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: ATA/ATAPI-6 T13 1410D revision 2:
* signifies the current active mode
# hdparm -i /dev/hdc
/dev/hdc:
Model=ST340014A, FwRev=8.01, SerialNo=5JXKSS6C
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=78165360
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2
AdvancedPM=no WriteCache=enabled
Drive conforms to: ATA/ATAPI-6 T13 1410D revision 2:
* signifies the current active mode
# hdparm -Xudma5 /dev/hdc
/dev/hdc:
setting xfermode to 69 (UltraDMA mode5)
HDIO_DRIVE_CMD(setxfermode) failed: Input/output error
В чем может быть дело?
--
С уважением, Прокопьев Евгений
next reply other threads:[~2006-03-01 8:59 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-03-01 8:59 Eugene Prokopiev [this message]
2006-03-01 9:33 ` Sergey Vlasov
2006-03-01 12:18 ` Eugene Prokopiev
2006-03-01 13:30 ` Sergey Vlasov
2006-03-01 15:03 ` Eugene Prokopiev
2006-03-01 15:30 ` Sergey Vlasov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4405625D.6050504@ats-manager.stc.donpac.ru \
--to=prokopiev@stc.donpac.ru \
--cc=Hardware@lists.altlinux.org \
--cc=hardware@altlinux.ru \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
ALT Linux hardware support
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \
hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org
public-inbox-index hardware
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.hardware
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git