From: Eugene Prokopiev <prokopiev@stc.donpac.ru> To: Hardware@lists.altlinux.org Subject: [Hardware] ATI Radeon RV280 on ALM 2.4 Date: Wed, 01 Mar 2006 09:36:15 +0300 Message-ID: <440540DF.7080903@ats-manager.stc.donpac.ru> (raw) Здравствуйте! Требуется на ALM 2.4 завести следующее: # pciscan Recommended driver Description ------------------ ----------- unknown Intel Corp.|82865G [Springdale-G] Chipset Host Bridge[Host bridge] unknown Intel Corp.|82865G/PE/P Processor to AGP Controller[PCI bridge Normal decode] usb-uhci Intel Corporation|USB Controller[UHCI USB Controller] usb-uhci Intel Corporation|USB Controller[UHCI USB Controller] usb-uhci Intel Corporation|USB Controller[UHCI USB Controller] usb-uhci Intel Corp.|82801EB USB EHCI Controller #2[UHCI USB Controller] usb-ehci Intel Corporation|USB Enhanced Controller[EHCI USB Controller] i810_rng Intel Corporation|82820 815e (Camino 2) Chipset PCI[PCI bridge Normal decode] unknown Intel Corp.|82801EB ISA Bridge (LPC)[ISA bridge] unknown Intel Corp.|82801EB ICH5 IDE[IDE interface storage controller] unknown Intel Corp.|82801EB SMBus[SMBus] snd-intel8x0 Intel Corp.|82801EB AC'97 Audio[Multimedia audio controller] Card:ATI Radeon RV280 ATI Technologies Inc|Radeon RV280 [Radeon 9200][VGA compatible controller] unknown [Display controller] 8139too Realtek|RTL-8139[Ethernet controller] eepro100 Intel Corp.|NC3121 Fast Ethernet NIC (WOL)[Ethernet controller] Много не нужно: хватит 2D в режиме 1024х768 16 85 :) Запускаю xf86cfg, он выдает значительно больше. В Configure Modeline выбираю требуемое, нажимаю Quit. Предлагают сохранить наконфигуренное в /etc/X11/XF86Config, соглашаюсь. Также предлагают записать конфигурацию XKB в /usr/X11R6/lib/X11/xkb/X0-config.keyboard, тоже соглашаюсь. После этого ни на текстовых консолях, ни на 7ой не вижу ничего. По ssh запускаю service dm start. На 7ой консоли вижу нечто жуткое (совсем не 1024х768 16 85), на текстовых консолях текст из белого превращается в оранжево-коричневый. В конфиг нагенерилось следующее: # cat /etc/X11/XF86Config Section "ServerLayout" Identifier "XFree86 Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" ModulePath "/usr/X11R6/lib/modules" FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled" FontPath "unix/:-1" EndSection Section "Module" Load "dbe" Load "dri" Load "extmod" Load "glx" Load "record" Load "xie" Load "xtrap" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/mouse" EndSection Section "Monitor" #DisplaySize 310 230 # mm Identifier "Monitor0" VendorName "SAM" ModelName "SyncMaster" Option "DPMS" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "Dac6Bit" # [<bool>] #Option "Dac8Bit" # [<bool>] #Option "ForcePCIMode" # [<bool>] #Option "BusType" # [<str>] #Option "CPPIOMode" # [<bool>] #Option "CPusecTimeout" # <i> #Option "AGPMode" # <i> #Option "AGPFastWrite" # [<bool>] #Option "AGPSize" # <i> #Option "GARTSize" # <i> #Option "RingSize" # <i> #Option "BufferSize" # <i> #Option "EnableDepthMoves" # [<bool>] #Option "EnablePageFlip" # [<bool>] #Option "NoBackBuffer" # [<bool>] #Option "PanelOff" # [<bool>] #Option "DDCMode" # [<bool>] #Option "MonitorLayout" # [<str>] #Option "IgnoreEDID" # [<bool>] #Option "OverlayOnCRTC2" # [<bool>] #Option "CloneMode" # [<str>] #Option "CloneHSync" # [<str>] #Option "CloneVRefresh" # [<str>] #Option "UseFBDev" # [<bool>] #Option "VideoKey" # <i> #Option "DisplayPriority" # [<str>] #Option "PanelSize" # [<str>] #Option "ForceMinDotClock" # <freq> Identifier "Card0" Driver "ati" VendorName "ATI Technologies Inc" BoardName "Unknown Board" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Depth 1 EndSubSection SubSection "Display" Depth 4 EndSubSection SubSection "Display" Depth 8 EndSubSection SubSection "Display" Depth 15 EndSubSection SubSection "Display" Depth 16 EndSubSection SubSection "Display" Depth 24 EndSubSection EndSection Заменяю секцию Screen на следующее: Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" Subsection "Display" Depth 16 Modes "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection EndSection В ответ на startx получаю совершенно дикое сообщение: (==) Log file: "/var/log/XFree86.0.log", Time: Wed Mar 1 09:29:37 2006 (==) Using config file: "/etc/X11/XF86Config" (WW) RADEON: No matching Device section for instance (BusID PCI:1:0:1) found (EE) RADEON(0): No Display subsection in Screen section "Screen0" for depth/fbbpp 8/8 (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found Напомню, что в конфиге написано BusID "PCI:1:0:0" По этому поводу в /var/log/XFree86.0.log написано: (II) Primary Device is: PCI 01:00:0 (II) ATI: Candidate "Device" section "Card0". (WW) ATI: PCI/AGP Mach64 in slot 1:0:1 could not be detected! (WW) RADEON: No matching Device section for instance (BusID PCI:1:0:1) found (--) Chipset ATI Radeon 9200 5961 (AGP) found ... (II) RADEON(0): PCI bus 1 card 0 func 0 (EE) RADEON(0): No Display subsection in Screen section "Screen0" for depth/fbbpp 8/8 (II) UnloadModule: "ati" (II) UnloadModule: "vgahw" (II) Unloading /usr/X11R6/lib/modules/libvgahw.a (II) UnloadModule: "radeon" (II) Unloading /usr/X11R6/lib/modules/drivers/radeon_drv.o (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found Установлено: # rpm -qa | grep XFree XFree86-KOI8-75dpi-fonts-3.0-ipl7mdk XFree86-bitmaps-4.3.0-alt17 XFree86-xauth-4.3.0-alt17 XFree86-75dpi-fonts-4.3.0-alt17 XFree86-libs-4.3.0-alt17 XFree86-4.3.0-alt17 XFree86-xfs-4.3.0-alt17 XFree86-xdm-4.3.0-alt17 XFree86-Xnest-4.3.0-alt17 XFree86-devel-4.3.0-alt17 XFree86-utils-4.3.0-alt17 XFree86-locales-4.3.0-alt17 XFree86-server-4.3.0-alt17 # rpm -qa | grep fglrx kernel-modules-fglrx-std-up-1.0.3.7.6-alt6.6 Пробовал сделать так: # apt-cache search XFree86 | grep ati XFree86 - Part of the XFree86 implementation of the X Window System XFree86-ati-gatos - ATI Gatos additional drivers for XFree86-4.3.0 XFree86-devel-static - X11R6 development static libraries XFree86-doc - Documentation on various X11 programming interfaces XFree86-8514 - The XFree86 server program for older IBM 8514 or compatible video cards hwdata - Hardware identification and configuration data libGLwrapper - GLwrapper library for automatic selecting right libGL library livecd-config-xf86vesa - setup for LiveCD creation - preconfigure XFree86 for VESA modes xfree86_xkb_xml - XML-based XKB configuration registry [root@prokopiev root]# apt-get install XFree86-ati-gatos Reading Package Lists... Done Building Dependency Tree... Done The following NEW packages will be installed: XFree86-ati-gatos 0 upgraded, 1 newly installed, 0 removed and 4 not upgraded. Need to get 0B/265kB of archives. After unpacking 572kB of additional disk space will be used. Committing changes... Preparing... ################################################################################################### [100%] 1: XFree86-ati-gatos ################################################################################################### [100%] Done. Но теперь я даже не могу запустить xf86cfg List of video drivers: ... ati ... ati_gatos ... Duplicate symbol ATIMach64PollEngineStatus in /usr/X11R6/lib/modules/drivers/atimisc_gatos_drv.o Also defined in /usr/X11R6/lib/modules/drivers/atimisc_drv.o Fatal server error: Module load failure When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.8.log". Please report problems to xfree86@packages.altlinux.org. Failed to run "X -configure". X c изменениями в конфиге, которые описаны выше, тоже не запускаются. Что делать дальше? -- С уважением, Прокопьев Евгений
next reply other threads:[~2006-03-01 6:36 UTC|newest] Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top 2006-03-01 6:36 Eugene Prokopiev [this message] 2006-03-01 8:02 ` Yakov Reztsov 2006-03-01 8:01 ` Eugene Prokopiev 2006-03-01 11:55 ` Yakov Reztsov 2006-03-01 12:28 ` Eugene Prokopiev 2006-03-01 13:38 ` Sergey Vlasov
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=440540DF.7080903@ats-manager.stc.donpac.ru \ --to=prokopiev@stc.donpac.ru \ --cc=Hardware@lists.altlinux.org \ --cc=hardware@altlinux.ru \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux hardware support This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \ hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org public-inbox-index hardware Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.hardware AGPL code for this site: git clone https://public-inbox.org/public-inbox.git