From: "Alexei V. Mezin" <alexei_vm@micmedia.ru>
To: hardware@lists.altlinux.ru
Subject: [Hardware] MP3 плеер NEXX NF-340
Date: Tue, 15 Nov 2005 02:32:17 +0300
Message-ID: <43791E81.40507@micmedia.ru> (raw)
Попался в руки MP3 плеер NEXX NF-340, 512Мб, поддержка mp3/wma, радио и
прочий стандартный набор. Подключил я его к Сизифу и получил вот что:
Nov 13 15:08:14 threebears kernel: usb 1-4: new high speed USB device
using ehci_hcd and address 2
Nov 13 15:08:16 threebears kernel: SCSI subsystem initialized
Nov 13 15:08:16 threebears kernel: Initializing USB Mass Storage driver...
Nov 13 15:08:16 threebears kernel: scsi0 : SCSI emulation for USB Mass
Storage devices
Nov 13 15:08:16 threebears kernel: usbcore: registered new driver
usb-storage
Nov 13 15:08:16 threebears kernel: USB Mass Storage support registered.
Nov 13 15:08:21 threebears kernel: Vendor: Model: MP3 Player
Rev: 1.00
Nov 13 15:08:21 threebears kernel: Type: Direct-Access
ANSI SCSI revision: 00
Nov 13 15:08:21 threebears kernel: SCSI device sda: 995328 512-byte hdwr
sectors (510 MB)
Nov 13 15:08:21 threebears kernel: sda: Write Protect is off
Nov 13 15:08:21 threebears kernel: sda: assuming drive cache: write through
Nov 13 15:08:21 threebears kernel: SCSI device sda: 995328 512-byte hdwr
sectors (510 MB)
Nov 13 15:08:21 threebears kernel: sda: Write Protect is off
Nov 13 15:08:21 threebears kernel: sda: assuming drive cache: write through
Nov 13 15:08:21 threebears kernel: sda: sda1
Nov 13 15:08:21 threebears kernel: Attached scsi removable disk sda at
scsi0, channel 0, id 0, lun 0
Nov 13 15:08:21 threebears scsi.agent[9402]: disk at
/devices/pci0000:00/0000:00:0e.2/usb1/1-4/1-4:1.0/host0/target0:0:0/0:0:0:0
Nov 13 15:08:21 threebears kernel: Buffer I/O error on device sda1,
logical block 1001216
Nov 13 15:08:21 threebears kernel: Buffer I/O error on device sda1,
logical block 1001217
Nov 13 15:08:21 threebears kernel: Buffer I/O error on device sda1,
logical block 1001218
Nov 13 15:08:21 threebears kernel: Buffer I/O error on device sda1,
logical block 1001219
Nov 13 15:08:21 threebears kernel: Buffer I/O error on device sda1,
logical block 1001220
Nov 13 15:08:21 threebears kernel: Buffer I/O error on device sda1,
logical block 1001221
Nov 13 15:08:21 threebears kernel: Buffer I/O error on device sda1,
logical block 1001222
Nov 13 15:08:21 threebears kernel: Buffer I/O error on device sda1,
logical block 1001223
Nov 13 15:08:21 threebears kernel: Buffer I/O error on device sda1,
logical block 1001216
Nov 13 15:08:21 threebears kernel: Buffer I/O error on device sda1,
logical block 1001217
В итоге плеер не замонтировался, связка hal+ivman подавилась :(. Но
руками mount /dev/sda1 bla-bla-bla проходит отлично, файлы копируются,
плеером потом воспринимаются нормально. Где проблема?
На всякий случай вывод fdisk и hal-device:
Disk /dev/sda: 509 MB, 509607936 bytes
16 heads, 32 sectors/track, 1944 cylinders
Units = cylinders of 512 * 512 = 262144 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 1956 500720+ 6 FAT16
1: udi = '/org/freedesktop/Hal/devices/storage_model_MP3_Player'
info.addons = { 'hald-addon-storage' } (string list)
storage.policy.should_mount = true (bool)
block.storage_device =
'/org/freedesktop/Hal/devices/storage_model_MP3_Player' (string)
info.udi = '/org/freedesktop/Hal/devices/storage_model_MP3_Player'
(string)
storage.requires_eject = false (bool)
storage.hotpluggable = true (bool)
info.capabilities = { 'storage', 'block' } (string list)
info.category = 'storage' (string)
info.product = 'MP3 Player' (string)
info.vendor = '' (string)
storage.removable = true (bool)
storage.physical_device =
'/org/freedesktop/Hal/devices/usb_device_e56_6015_0000A2580D0B1D15_if0'
(string)
storage.lun = 0 (0x0) (int)
storage.drive_type = 'disk' (string)
storage.vendor = '' (string)
storage.model = 'MP3 Player' (string)
storage.automount_enabled_hint = true (bool)
storage.media_check_enabled = true (bool)
storage.no_partitions_hint = false (bool)
storage.bus = 'usb' (string)
block.is_volume = false (bool)
block.minor = 0 (0x0) (int)
block.major = 8 (0x8) (int)
block.device = '/dev/sda' (string)
linux.hotplug_type = 3 (0x3) (int)
info.parent =
'/org/freedesktop/Hal/devices/usb_device_e56_6015_0000A2580D0B1D15_if0_scsi_host_scsi_device_lun0'
(string)
linux.sysfs_path_device = '/sys/block/sda' (string)
linux.sysfs_path = '/sys/block/sda' (string)
next reply other threads:[~2005-11-14 23:32 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-11-14 23:32 Alexei V. Mezin [this message]
2005-11-15 6:04 ` Eugene Ostapets
2005-11-15 10:17 ` Sergey Vlasov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=43791E81.40507@micmedia.ru \
--to=alexei_vm@micmedia.ru \
--cc=alex783@hotbox.ru \
--cc=hardware@altlinux.ru \
--cc=hardware@lists.altlinux.ru \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
ALT Linux hardware support
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \
hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org
public-inbox-index hardware
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.hardware
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git