ALT Linux hardware support
 help / color / mirror / Atom feed
* [Hardware] Определение параметров DDR памяти.
@ 2005-11-14 10:42 Artem
  2005-11-14 11:24 ` Andrei Bulava
  0 siblings, 1 reply; 2+ messages in thread
From: Artem @ 2005-11-14 10:42 UTC (permalink / raw)
  To: hardware

Добрый день!

Чем и как можно определить в sisyphus параметры планки памяти (чтение из 
SPD) - такие как тип, частота шины, etc...

Rgds, Artem.


^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [Hardware] Определение параметров DDR памяти.
  2005-11-14 10:42 [Hardware] Определение параметров DDR памяти Artem
@ 2005-11-14 11:24 ` Andrei Bulava
  0 siblings, 0 replies; 2+ messages in thread
From: Andrei Bulava @ 2005-11-14 11:24 UTC (permalink / raw)
  To: hardware

Artem wrote:
> Добрый день!

Hi!

> Чем и как можно определить в sisyphus параметры планки памяти (чтение из
> SPD) - такие как тип, частота шины, etc...

В теории

apt-get install dmidecode

На практике:

# dmidecode |grep -A3 DDR|grep Speed
                Current Speed: Unknown
                Current Speed: Unknown
                Current Speed: Unknown

Впрочем, dmidecode(8) объясняет, почему так - это не данные, прочитанные
из SPD :-(

Есть ещё скрипт decode-dimms.pl в составе lm_sensors - работает, только
что проверил. Правда, база производителей чипов и модулей у него с
пробелами, так что о том, что производитель чипов на имеющихся у меня
модулях - Hynix (Hyundai), я догадался только по "Manufacurer's Part
Number HYMD264 646B8R-D43" с помощью Google.

-- 
// AB1002-UANIC



^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2005-11-14 11:24 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2005-11-14 10:42 [Hardware] Определение параметров DDR памяти Artem
2005-11-14 11:24 ` Andrei Bulava

ALT Linux hardware support

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \
		hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org
	public-inbox-index hardware

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://lore.altlinux.org/org.altlinux.lists.hardware


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git