* [Hardware] gprsec
@ 2005-09-12 11:38 ` Golovin Vladimir
2005-09-12 11:49 ` Genix
0 siblings, 1 reply; 8+ messages in thread
From: Golovin Vladimir @ 2005-09-12 11:38 UTC (permalink / raw)
To: Hardware
Genix пишет:
> Golovin Vladimir wrote:
>
>> У меня ALM 2.4.
>> Пытаюсь настроить GPRS соединение через Samsung X100 с помощью gprsec.
>> Ставлю в настройках порт ttyUSB0, пишет, что "coldn't find selected
>> port" и под юзером и под рутом. Шнур usb-serial, ALM из коробки,
>> модуль usbserial загружен. Под виндой работает (правда, на другой
>> машине). Подскажите, пожалуйста, куда посмотреть?
>
>
> 1) а что в логах, телефон определяется?
> 2) ну ка в hardware@ с такими вопросами ;))))
>
Понял, иду в hardware.
В логах чего? gprsec ничего в хтерминал больше не выдает. kppp
винет на инициализации.
--
bigboots
Vladimir Golovin
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Hardware] gprsec
2005-09-12 11:38 ` [Hardware] gprsec Golovin Vladimir
@ 2005-09-12 11:49 ` Genix
2005-09-13 4:32 ` Golovin Vladimir
0 siblings, 1 reply; 8+ messages in thread
From: Genix @ 2005-09-12 11:49 UTC (permalink / raw)
To: hardware
Golovin Vladimir wrote:
> В логах чего? gprsec ничего в хтерминал больше не выдает. kppp винет на
> инициализации.
я имел в виду логи (/var/log/messages) при подключении телефона
--
У каждого в башке свои тараканы...
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Hardware] gprsec
2005-09-12 11:49 ` Genix
@ 2005-09-13 4:32 ` Golovin Vladimir
2005-09-13 5:05 ` Genix
0 siblings, 1 reply; 8+ messages in thread
From: Golovin Vladimir @ 2005-09-13 4:32 UTC (permalink / raw)
To: hardware
Genix пишет:
> Golovin Vladimir wrote:
>
>> В логах чего? gprsec ничего в хтерминал больше не выдает. kppp винет
>> на инициализации.
>
> я имел в виду логи (/var/log/messages) при подключении телефона
А там вот что:
Sep 12 22:40:23 localhost pam_tcb[1768]: su: Session closed for
cacheman
Sep 12 22:41:44 localhost kernel: hub.c: new USB device
00:10.0-1, assigned address 2
Sep 12 22:41:44 localhost kernel: hub.c: new USB device
00:10.0-1, assigned address 2
Sep 12 22:41:48 localhost kernel: usb.c: registered new driver serial
Sep 12 22:41:48 localhost kernel: usbserial.c: USB Serial support
registered for Generic
Sep 12 22:41:48 localhost kernel: usbserial.c: USB Serial Driver
core v1.4
Sep 12 22:41:48 localhost kernel: usbserial.c: USB Serial support
registered for PL-2303
Sep 12 22:41:48 localhost kernel: usbserial.c: PL-2303 converter
detected
Sep 12 22:41:48 localhost kernel: usbserial.c: PL-2303 converter
now attached to ttyUSB0 (or usb/tts/0 for devfs)
Sep 12 22:41:48 localhost kernel: pl2303.c: Prolific PL2303 USB
to serial adaptor driver v0.10
--
bigboots
Vladimir Golovin
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Hardware] gprsec
2005-09-13 4:32 ` Golovin Vladimir
@ 2005-09-13 5:05 ` Genix
2005-09-13 5:53 ` Golovin Vladimir
0 siblings, 1 reply; 8+ messages in thread
From: Genix @ 2005-09-13 5:05 UTC (permalink / raw)
To: hardware
Golovin Vladimir wrote:
> Sep 12 22:41:48 localhost kernel: usbserial.c: PL-2303 converter detected
> Sep 12 22:41:48 localhost kernel: usbserial.c: PL-2303 converter now
> attached to ttyUSB0 (or usb/tts/0 for devfs)
^^^^^^^^^^^^^^^^^^^^^^
> Sep 12 22:41:48 localhost kernel: pl2303.c: Prolific PL2303 USB to
> serial adaptor driver v0.10
а теперь если
1) открыть порт minicom'ом и по'AT'акать ему туда? в ответ не а'OK'нется?
2) если поиграться со скоростью порта, то же самое будет?
--
У каждого в башке свои тараканы...
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [Hardware] gprsec
2005-09-13 5:05 ` Genix
@ 2005-09-13 5:53 ` Golovin Vladimir
2005-09-13 5:46 ` Genix
0 siblings, 1 reply; 8+ messages in thread
From: Golovin Vladimir @ 2005-09-13 5:53 UTC (permalink / raw)
To: hardware
Genix пишет:
> Golovin Vladimir wrote:
>
>> Sep 12 22:41:48 localhost kernel: usbserial.c: PL-2303 converter detected
>> Sep 12 22:41:48 localhost kernel: usbserial.c: PL-2303 converter now
>> attached to ttyUSB0 (or usb/tts/0 for devfs)
>
> ^^^^^^^^^^^^^^^^^^^^^^
>
>> Sep 12 22:41:48 localhost kernel: pl2303.c: Prolific PL2303 USB to
>> serial adaptor driver v0.10
>
> а теперь если
> 1) открыть порт minicom'ом и по'AT'акать ему туда? в ответ не а'OK'нется?
Попытаюсь.
> 2) если поиграться со скоростью порта, то же самое будет?
Честно говоря, я не знаю, как это сделать.
А gprsec вообще работает? А то на Setup вылетает через раз и в
терминале постоянно пишет:
XS_Tk__Callback_Call error:Undefined subroutine
&main::disckonnect called at /usr/sbin/gprsec line 1913.
--
bigboots
Vladimir Golovin
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2005-09-13 8:41 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2005-09-12 11:38 ` [Hardware] gprsec Golovin Vladimir
2005-09-12 11:49 ` Genix
2005-09-13 4:32 ` Golovin Vladimir
2005-09-13 5:05 ` Genix
2005-09-13 5:53 ` Golovin Vladimir
2005-09-13 5:46 ` Genix
2005-09-13 7:55 ` Michael Shigorin
2005-09-13 8:41 ` Golovin Vladimir
ALT Linux hardware support
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \
hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org
public-inbox-index hardware
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.hardware
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git