* [Hardware] Promise SATA 150 TX2 Plus
@ 2005-04-21 20:28 Zilke Pavel
2005-04-28 20:18 ` Michael Shigorin
0 siblings, 1 reply; 3+ messages in thread
From: Zilke Pavel @ 2005-04-21 20:28 UTC (permalink / raw)
To: hardware
Можно ли как-нибудь заставить работать ATA133 канал на этой плате?
SATA винты работают с модулем sata_promise.
Ядро 2.6.10-alt2
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [Hardware] Promise SATA 150 TX2 Plus
2005-04-21 20:28 [Hardware] Promise SATA 150 TX2 Plus Zilke Pavel
@ 2005-04-28 20:18 ` Michael Shigorin
2005-04-28 22:16 ` Zilke Pavel
0 siblings, 1 reply; 3+ messages in thread
From: Michael Shigorin @ 2005-04-28 20:18 UTC (permalink / raw)
To: hardware
On Fri, Apr 22, 2005 at 12:28:01AM +0400, Zilke Pavel wrote:
> Можно ли как-нибудь заставить работать ATA133 канал на этой плате?
> SATA винты работают с модулем sata_promise.
> Ядро 2.6.10-alt2
Поищите в faq.altlinux.ru
--
---- WBR, Michael Shigorin <mike@altlinux.ru>
------ Linux.Kiev http://www.linux.kiev.ua/
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [Hardware] Promise SATA 150 TX2 Plus
2005-04-28 20:18 ` Michael Shigorin
@ 2005-04-28 22:16 ` Zilke Pavel
0 siblings, 0 replies; 3+ messages in thread
From: Zilke Pavel @ 2005-04-28 22:16 UTC (permalink / raw)
To: hardware
Michael Shigorin пишет:
>On Fri, Apr 22, 2005 at 12:28:01AM +0400, Zilke Pavel wrote:
>> Можно ли как-нибудь заставить работать ATA133 канал на этой плате?
>> SATA винты работают с модулем sata_promise.
>> Ядро 2.6.10-alt2
>
>Поищите в faq.altlinux.ru
>
>
>
Нашел только то, что размечтался я:) не работает оно. Если что-то
пропустил, то буду очень признателен за указание на то, что пропустил.
А во фре работает...
С уважением,
Цильке Павел aka zidex
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2005-04-28 22:16 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2005-04-21 20:28 [Hardware] Promise SATA 150 TX2 Plus Zilke Pavel
2005-04-28 20:18 ` Michael Shigorin
2005-04-28 22:16 ` Zilke Pavel
ALT Linux hardware support
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \
hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org
public-inbox-index hardware
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.hardware
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git