ALT Linux hardware support
 help / color / mirror / Atom feed
* [Hardware] hdparm and drives
@ 2005-03-04 11:57 Andriy Dobrovol's'kii
  2005-03-04 12:09 ` Michael Shigorin
  0 siblings, 1 reply; 7+ messages in thread
From: Andriy Dobrovol's'kii @ 2005-03-04 11:57 UTC (permalink / raw)
  To: hardware

Hi
Есть система с несколькими устройствами на IDE.
hdparm -I /dev/hdd

/dev/hdd:

ATAPI CD-ROM, with removable media
         Model Number:       HL-DT-STDVD-ROM GDR8162B
         Serial Number:
         Firmware Revision:  0015
Standards:
         Likely used CD-ROM ATAPI-1
Configuration:
         DRQ response: 50us.
         Packet size: 12 bytes
Capabilities:
         LBA, IORDY(can be disabled)
         DMA: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 udma0 udma1 *udma2
              Cycle time: min=120ns recommended=120ns
         PIO: pio0 pio1 pio2 pio3 pio4
              Cycle time: no flow control=120ns  IORDY flow 
control=120ns

hdparm -I /dev/hdc

/dev/hdc:

ATAPI CD-ROM, with removable media
         Model Number:       _NEC CD-RW NR-7800B
         Serial Number:
         Firmware Revision:  1.01
Standards:
         Likely used CD-ROM ATAPI-1
Configuration:
         DRQ response: 3ms.
         Packet size: 12 bytes
Capabilities:
         LBA, IORDY(cannot be disabled)
         DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2
              Cycle time: min=120ns recommended=120ns
         PIO: pio0 pio1 pio2 pio3 pio4
              Cycle time: no flow control=120ns  IORDY flow 
control=120ns

hdparm -I /dev/hda

/dev/hda:

ATA device, with non-removable media
         Model Number:       SAMSUNG SV4002H
         Serial Number:      0379J1FT137559
         Firmware Revision:  QP100-07
Standards:
         Used: ATA/ATAPI-6 T13 1410D revision 1
         Supported: 6 5 4 3
Configuration:
         Logical         max     current
         cylinders       16383   16383
         heads           16      16
         sectors/track   63      63
         --
         CHS current addressable sectors:   16514064
         LBA    user addressable sectors:   78242976
         device size with M = 1024*1024:       38204 MBytes
         device size with M = 1000*1000:       40060 MBytes (40 GB)
Capabilities:
         LBA, IORDY(cannot be disabled)
         bytes avail on r/w long: 4      Queue depth: 1
         Standby timer values: spec'd by Standard, no device 
specific minimum
         R/W multiple sector transfer: Max = 16  Current = 16
         Recommended acoustic management value: 128, current value: 0
         DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
              Cycle time: min=120ns recommended=120ns
         PIO: pio0 pio1 pio2 pio3 pio4
              Cycle time: no flow control=120ns  IORDY flow 
control=120ns
Commands/features:
         Enabled Supported:
            *    NOP cmd
            *    READ BUFFER cmd
            *    WRITE BUFFER cmd
            *    Host Protected Area feature set
            *    Look-ahead
            *    Write cache
            *    Power Management feature set
                 Security Mode feature set
                 SMART feature set
            *    Mandatory FLUSH CACHE command
                 Automatic Acoustic Management feature set
                 SET MAX security extension
            *    DOWNLOAD MICROCODE cmd
Security:
         Master password revision code = 65534
                 supported
         not     enabled
         not     locked
         not     frozen
         not     expired: security count
                 supported: enhanced erase
         20min for SECURITY ERASE UNIT. 20min for ENHANCED SECURITY 
ERASE UNIT.
HW reset results:
         CBLID- above Vih
         Device num = 0 determined by the jumper
Checksum: correct

Всё работает, но как-то медленно.
Есть желание "получить больше за те же деньги". :)
Файл /etc/sysconfig/harddisks сплошные комментарии. Я правильно 
понимаю, что в моем случае снять комментарий с включения дма вполне 
безопасно? И в строку дополнительных ключей можно внести установку 
режима pio4?
Или не стоит? И нужно создавать по отдельному файлу на каждое 
устройство в /etc/sysconfig/harddisk?
-- 
Rgrds,
Andriy
*********************************************************************
email: dobr at iop dot kiev dot ua            Kyiv, Ukraine
Phone: (380-44)   265-7824            Department of Gas Electronics
Fax:   (380-44)   265-2329             Institute of Physics of NASU
*********************************************************************


^ permalink raw reply	[flat|nested] 7+ messages in thread
end of thread, other threads:[~2005-03-10 13:39 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2005-03-04 11:57 [Hardware] hdparm and drives Andriy Dobrovol's'kii
2005-03-04 12:09 ` Michael Shigorin
2005-03-04 12:26   ` Andrey Rahmatullin
2005-03-04 12:48     ` Michael Shigorin
2005-03-04 13:02       ` Andrey Rahmatullin
2005-03-04 13:09         ` Michael Shigorin
2005-03-10 13:39   ` Andriy Dobrovol's'kii

ALT Linux hardware support

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \
		hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org
	public-inbox-index hardware

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://lore.altlinux.org/org.altlinux.lists.hardware


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git