From: Yakov Reztsov <Yakovr_st@mail.ru>
To: hardware@altlinux.ru
Subject: Re: [Hardware] AVerTV Studio 307, нет звука
Date: Fri, 04 Feb 2005 11:23:48 +0300
Message-ID: <42033114.9040900@mail.ru> (raw)
In-Reply-To: <E1CwvN4-00091x-00.v-boiko-mail-ru@f21.mail.ru>
Владимир Бойко пишет:
>
> Добрый день, знатоки!
> Установил Мастера 2.4
> После поиска в интернете получил изображение со своего ТВ тьюнера,
> AVerTV Studio 307,
> а звука пока нет! :( Слушал прямо с линейного выхода ТВ тьнера
> Может кто подскажет где решение проблеммы?
>
> dmesg:
> Linux video capture interface: v1.00
> saa7130/34: v4l2 driver version 0.2.12 loaded
> saa7134[0]: found at 00:0a.0, rev: 1, irq: 18, latency: 32, mmio:
> 0xcfffbc00
> saa7134[0]: subsystem: 1461:9715, board: AverMedia 305
> [card=35,insmod option]
> saa7134[0]: board init: gpio is 0
> saa7134[0]: i2c eeprom 00: 61 14 15 97 ff ff ff ff ff ff ff ff ff ff
> ff ff
> saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> ff ff
> saa7134[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> ff ff
> saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> ff ff
> tuner: chip found at addr 0xc2 i2c-bus saa7134[0]
> tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by
> saa7134[0]
> tda9885/6/7: chip found @ 0x86
> saa7134[0]: registered device video0 [v4l2]
> saa7134[0]: registered device vbi0
> saa7134[0]: registered device radio0
> saa7134[0]/audio: audio carrier scan failed, using 5.500 MHz
> [default]
Может быть, проблема в разностной частоте звука ^^^^^ ?
Если tvtuner имеет встроенный регулятор громкости, может быть громкость
установлена на 0 или включен режим Mute?
--
Yakov Reztsov
prev parent reply other threads:[~2005-02-04 8:23 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-02-04 4:47 Владимир Бойко
2005-02-04 8:01 ` Sviataslau Svirydau
2005-02-04 8:23 ` Yakov Reztsov [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=42033114.9040900@mail.ru \
--to=yakovr_st@mail.ru \
--cc=hardware@altlinux.ru \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
ALT Linux hardware support
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \
hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org
public-inbox-index hardware
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.hardware
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git