From: "Denis A. Yurashkou" <dayfuaim@msx.ru> To: hardware@altlinux.ru Subject: [Hardware] NUT && APC SmartUPS-1500 Date: Tue, 01 Feb 2005 19:04:41 +0300 Message-ID: <41FFA899.8000100@msx.ru> (raw) Добрый день! Есть SmartUPS-1500 с управлением по COM1. NUT его не хочет подцеплять. ups.conf: [apcsmart] driver = apcsmart port = /dev/ttyS0 desc = "APC SmartUPS-1500" Другие .conf не менялись. при service upsdrv start имеем: Starting UPS drivers: Network UPS Tools (version 2.0.1-pre4) - APC Smart protocol driver <... ~3 min...> Driver version 1.99.6, command table version 2.0 Unable to detect an APC Smart protocol UPS on port /dev/ttyS0 Check the cabling, port name or model name and try again Driver failed to start (exit status=1) Network UPS Tools - UPS driver controller 2.0.1-pre4 [FAILED] Если даю COM2, то сразу получаю FAIL. Что ему сказать? -- ---------------- Best regards, Denis A. Yurashkou [DAY] (dayfuaim@msx.ru) Origin: Stop the World -- I Wanna Get Off!..
next reply other threads:[~2005-02-01 16:04 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2005-02-01 16:04 Denis A. Yurashkou [this message] 2005-02-01 16:04 ` Ilia Menchikh 2005-02-01 16:33 ` Denis A. Yurashkou 2005-02-01 16:48 ` Denis A. Yurashkou
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=41FFA899.8000100@msx.ru \ --to=dayfuaim@msx.ru \ --cc=hardware@altlinux.ru \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux hardware support This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \ hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org public-inbox-index hardware Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.hardware AGPL code for this site: git clone https://public-inbox.org/public-inbox.git