From: "ALT Linux User" <altlinux.mailbox@gmail.com>
To: hardware <hardware@lists.altlinux.org>
Subject: [Hardware] ALD4. TOSHIBA Notebook Atheros WiFi через ndiswrapper
Date: Mon, 5 Nov 2007 15:52:23 +0300
Message-ID: <40babb620711050452u222ca753mc6a549243cdecf4a@mail.gmail.com> (raw)
ALD4 -> Branch 4.
Notebook TOSHIBA Satellite L40-139
lspci:
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and
945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile
945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/940GML
Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 3 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB
UHCI #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2
EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface
Bridge (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family)
Serial ATA Storage Controller IDE (rev 02)
02:00.0 Ethernet controller: Atheros Communications, Inc. Unknown
device 001c (rev 01)
05:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
05:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
WiFi Card Atheros AR5007EG
-------
Установил
ndiswrapper-1.47-alt1
kernel-modules-ndiswrapper-std-smp#1.47-alt1
kernel-source-ndiswrapper-1.47 (может и не надо?)
Убедился, что карта включена.
Скачал оффтопиковые драйвера для AR5007EG:
ar5211.sys net5211.cat net5211.inf
Далее:
# ndiswrapper -i net5211.inf
# ndiswrapper -l
net5211 : driver installed
device (168C:001C) present
# modprobe ndiswrapper
[лампочка-индикатор карты загорелась]
# lsmod |grep ndiswrapper
ndiswrapper 191888 0
usbcore 129028 5 ndiswrapper,usbhid,ehci_hcd,uhci_hcd
# dmesg |grep ndiswrapper
ndiswrapper version 1.47 loaded (smp=yes)
ndiswrapper: driver net5211 (,06/21/2007,5.3.0.56) loaded
ndiswrapper (ZwClose:2246): closing handle 0xf71de4e8 not implemented
ndiswrapper: using IRQ 177
usbcore: registered new driver ndiswrapper
# ndiswrapper -m
Теперь о грустном.
Никакими ГУЁвыми утилитками наладить работу с сетью мне не удалось.
alterator - вообще делал что-то непонятное.
В сети задействована простая WEP защита, но настроить параметры до
рабочего состояния не удалось. Донести требуемые параметры через
alterator не удалось. Там просто нет таких полей для ввода. В лучшем
случае - карта видела сеть, но получить адрес по DHCP не могла.
Выдавая сообщения по кругу ASSOCIATING, SCANNING, INACTIVE, ACTIVE
alterator самостоятельно сеть не поднял.
Не знаю, в чём причина, но всё опять закончилось спасительной консолью в виде:
# iwconfig wlan0 ESSID [wlan name] nick [localhost] mode Auto key
[secret key] restricted
и традиционным # dhcpcd -G 192.168.1.1 wlan0
и всё сразу залетало.
Почему это же самое нельзя сделать через ГУЙ alterator'a для меня
загадка. Зачем делать web-настройщик, который висит с открытым портом,
который даёт возможность удалённого администрирования, если собственно
сеть через него настроить нельзя?
Теперь придётся учиться писать скрипты, поскольку стоит задача делать
этим ноутбуком ежедневно вход в сеть. А говорить пароль
администратора, ключ сети - нельзя. Нужно написать скриптик с такими
вот "входными" параметрами, как указано, но как-то так хитро, что бы
его запускал юзер с десктопной иконки, а выполнялись рутовые команды и
посмотреть сам скрипт было нельзя.
Даже не знаю, что и делать...
Кстати, и мой IBM ThinkPad тоже каждый божий раз нуждается в этих же
командах, для входа в сеть.
Ещё немного наблюдений TOSHIBA - IBM:
TOSHIBA не "просыпает" экран после STR, перезапускаю X. IBM - да.
T не "просыпает" WiFi после STR, hibernate, перезапускаю сеть. IBM - да.
У T гораздо слабее приём WiFi сигнала, T показывает между 50-60%, и
много шума, почти 40%. IBM - твёрдо более 95% и почти никакого шума,
часто 0%.
В принципе, конечно, никаких открытий. IBM - rulez и это стоит любых денег...
next reply other threads:[~2007-11-05 12:52 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-11-05 12:52 ALT Linux User [this message]
2007-11-28 17:58 ` ALT Linux User
2007-11-28 18:52 ` Andriy Dobrovol`s`kii
2007-11-28 19:11 ` ALT Linux User
2007-11-28 19:21 ` ALT Linux User
2007-11-28 19:22 ` Andriy Dobrovol`s`kii
2007-11-28 19:23 ` Pavlov Konstantin
2007-11-28 19:26 ` Valery V. Inozemtsev
2007-11-28 19:41 ` Anton Farygin
2007-11-28 19:58 ` Valery V. Inozemtsev
2007-11-28 19:43 ` ALT Linux User
2007-11-28 20:13 ` Valery V. Inozemtsev
2007-11-28 22:39 ` ALT Linux User
2007-11-29 11:04 ` frozen penguin
2007-11-30 6:32 ` ALT Linux User
2007-11-28 19:52 ` Andriy Dobrovol`s`kii
2007-11-28 20:02 ` Valery V. Inozemtsev
2007-11-28 20:12 ` Andriy Dobrovol`s`kii
2007-11-28 20:16 ` Valery V. Inozemtsev
2007-11-28 20:28 ` Andriy Dobrovol`s`kii
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=40babb620711050452u222ca753mc6a549243cdecf4a@mail.gmail.com \
--to=altlinux.mailbox@gmail.com \
--cc=hardware@lists.altlinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
ALT Linux hardware support
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \
hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org
public-inbox-index hardware
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.hardware
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git