* [Hardware] Настройка сканера hp scanjet 4400c в Desktop 4.1
@ 2008-11-09 16:34 KravchukAA
0 siblings, 0 replies; only message in thread
From: KravchukAA @ 2008-11-09 16:34 UTC (permalink / raw)
To: hardware
Всем привет.
Настройка сканера hp scanjet 4400c в Desktop 4.1
$ uname -r
2.6.25-std-def-alt8.M41.1
Имеется сканер hp scanjet 4400c. Установлены пакеты.
# sudo rpm -qa | grep sane
libsane-1.0.19-alt1
hplip-sane-2.7.12-alt2.M41.1
sane-1.0.19-alt1
xsane-0.995-alt1
xsane-doc-0.995-alt1
sane-frontends-1.0.14-alt2
xsane-gimp2-0.995-alt1
Делаю
# sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure
that
# you have loaded a kernel SCSI driver for your SCSI adapter.
# Also you need support for SCSI Generic (sg) in your operating system.
# If using Linux, try "modprobe sg".
found USB scanner (vendor=0x03f0, product=0x0705, chip=rts8801/rts8891) at
libusb:001:004
# Your USB scanner was (probably) detected. It may or may not be supported
by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
Правильно ли я понял, что сканер найден но с ним проблемы?
found USB scanner (vendor=0x03f0, product=0x0705, chip=rts8801/rts8891) at
libusb:001:004
# Your USB scanner was (probably) detected. It may or may not be supported
by
# SANE. Try scanimage -L and read the backend's manpage.
и надо сделать
# scanimage -L
device `hp_rts88xx:libusb:001:004' is a Hewlett-Packard ScanJet 4400C flatbed
scanner
И дальше откуда бы не запускал пишет: Либо устройство занято, либо ошибка
ввода вывода. Что дальше делать, куда копать, где почитать?
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2008-11-09 16:34 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-11-09 16:34 [Hardware] Настройка сканера hp scanjet 4400c в Desktop 4.1 KravchukAA
ALT Linux hardware support
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \
hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org
public-inbox-index hardware
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.hardware
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git