* [Hardware] проблемы с RT2500
@ 2008-04-14 16:59 Владимир
2008-04-14 17:54 ` Михаил Якушин
0 siblings, 1 reply; 11+ messages in thread
From: Владимир @ 2008-04-14 16:59 UTC (permalink / raw)
To: Hardware
2.6.18-std-smp-alt12
02:00.0 Network controller: RaLink RT2500 802.11g Cardbus/mini-PCI (rev 01)
Вот такое устройство.
http://support.asus.com/download/download.aspx?SLanguage=ru-ru&model=WL-107g
определяться не захотело.
установил kernel-source-rt2500 - driver for wireless 802.11b and 802.11g cards
that are based on the Ralink rt2500 chipset
собрал, загрузил модуль.
cat /etc/net/ifaces/ra0/wpa_supplicant.conf
ctrl_interface=/var/run/wpa_supplicant
update_config=1
network={
ssid="haw_home_wlan"
bssid=00:17:9a:dc:5e:aa
psk="3b5d3c7d207e37dceeedd301e3"
proto=WPA
key_mgmt=WPA-PSK
pairwise=TKIP
group=TKIP WEP104 WEP40
}
# wpa_supplicant -D wext -i ra0 -c /etc/net/ifaces/ra0/wpa_supplicant.conf -w
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 7 value 0x1 - ioctl[SIOCSIWENCODEEXT]: Operation not supported
ioctl[SIOCSIWENCODEEXT]: Operation not supported
ioctl[SIOCSIWENCODEEXT]: Operation not supported
ioctl[SIOCSIWENCODEEXT]: Operation not supported
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 5 value 0x1 -
тут долго висим, делаем ctrl+c
CTRL-EVENT-TERMINATING - signal 2 received
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 7 value 0x0 - Failed to disable WPA in the driver.
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 5 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 4 value 0x0 -
Тут, вроде, тоже модуль только посвежее, может он всё поддерживает?
https://launchpad.net/ubuntu/hardy/+source/rt2x00/2.0.12+git20071103-3
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [Hardware] проблемы с RT2500
2008-04-14 16:59 [Hardware] проблемы с RT2500 Владимир
@ 2008-04-14 17:54 ` Михаил Якушин
2008-04-14 19:38 ` Владимир
0 siblings, 1 reply; 11+ messages in thread
From: Михаил Якушин @ 2008-04-14 17:54 UTC (permalink / raw)
To: hardware
Владимир wrote:
> 2.6.18-std-smp-alt12
> 02:00.0 Network controller: RaLink RT2500 802.11g Cardbus/mini-PCI (rev 01)
>
> Вот такое устройство.
> http://support.asus.com/download/download.aspx?SLanguage=ru-ru&model=WL-107g
> определяться не захотело.
>
> установил kernel-source-rt2500 - driver for wireless 802.11b and 802.11g cards
> that are based on the Ralink rt2500 chipset
> собрал, загрузил модуль.
>
> cat /etc/net/ifaces/ra0/wpa_supplicant.conf
> ctrl_interface=/var/run/wpa_supplicant
> update_config=1
>
> network={
> ssid="haw_home_wlan"
> bssid=00:17:9a:dc:5e:aa
> psk="3b5d3c7d207e37dceeedd301e3"
> proto=WPA
> key_mgmt=WPA-PSK
> pairwise=TKIP
> group=TKIP WEP104 WEP40
> }
>
> # wpa_supplicant -D wext -i ra0 -c /etc/net/ifaces/ra0/wpa_supplicant.conf -w
> ioctl[SIOCSIWAUTH]: Operation not supported
> WEXT auth param 7 value 0x1 - ioctl[SIOCSIWENCODEEXT]: Operation not supported
> ioctl[SIOCSIWENCODEEXT]: Operation not supported
> ioctl[SIOCSIWENCODEEXT]: Operation not supported
> ioctl[SIOCSIWENCODEEXT]: Operation not supported
> ioctl[SIOCSIWAUTH]: Operation not supported
> WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported
> WEXT auth param 5 value 0x1 -
> тут долго висим, делаем ctrl+c
> CTRL-EVENT-TERMINATING - signal 2 received
> ioctl[SIOCSIWAUTH]: Operation not supported
> WEXT auth param 7 value 0x0 - Failed to disable WPA in the driver.
> ioctl[SIOCSIWAUTH]: Operation not supported
> WEXT auth param 5 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported
> WEXT auth param 4 value 0x0 -
>
>
> Тут, вроде, тоже модуль только посвежее, может он всё поддерживает?
> https://launchpad.net/ubuntu/hardy/+source/rt2x00/2.0.12+git20071103-3
В kernel-image-std-def (это 2.6.24) этот модуль есть, можете попробовать
обновить ядро из сизифа(можно только ядро)
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [Hardware] проблемы с RT2500
2008-04-14 17:54 ` Михаил Якушин
@ 2008-04-14 19:38 ` Владимир
2008-04-14 19:42 ` Михаил Якушин
0 siblings, 1 reply; 11+ messages in thread
From: Владимир @ 2008-04-14 19:38 UTC (permalink / raw)
To: hardware
теперь интерфейс стал wlan0
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 5 value 0x1 -
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Hardware] проблемы с RT2500
2008-04-14 19:38 ` Владимир
@ 2008-04-14 19:42 ` Михаил Якушин
2008-04-15 4:43 ` Владимир
0 siblings, 1 reply; 11+ messages in thread
From: Михаил Якушин @ 2008-04-14 19:42 UTC (permalink / raw)
To: hardware
Владимир wrote:
> теперь интерфейс стал wlan0
>
> ioctl[SIOCSIWAUTH]: Operation not supported
> WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported
> WEXT auth param 5 value 0x1 -
А в dmesg что?
Я думаю что в bugzilla.
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Hardware] проблемы с RT2500
2008-04-14 19:42 ` Михаил Якушин
@ 2008-04-15 4:43 ` Владимир
2008-04-15 4:49 ` Владимир
2008-04-15 5:34 ` Михаил Якушин
0 siblings, 2 replies; 11+ messages in thread
From: Владимир @ 2008-04-15 4:43 UTC (permalink / raw)
To: hardware
# wpa_supplicant -D wext -i
wlan1 -c /etc/net/ifaces/wlan1/wpa_supplicant.conf -w
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 5 value 0x1 - Trying to associate with 00:17:9a:dc:5e:aa
(SSID='haw_home_wlan' freq=2412 MHz)
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 5 value 0x1 - Associated with 00:17:9a:dc:5e:aa
WPA: Key negotiation completed with 00:17:9a:dc:5e:aa [PTK=TKIP GTK=TKIP]
CTRL-EVENT-CONNECTED - Connection to 00:17:9a:dc:5e:aa completed (auth) [id=0
id_str=]
CTRL-EVENT-TERMINATING - signal 2 received
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 5 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 4 value 0x0 -
#dmesg
ADDRCONF(NETDEV_UP): wlan1: link is not ready
wlan1: Initial auth_alg=0
wlan1: authenticate with AP 00:17:9a:dc:5e:aa
wlan1: RX authentication from 00:17:9a:dc:5e:aa (alg=0 transaction=2 status=0)
wlan1: authenticated
wlan1: associate with AP 00:17:9a:dc:5e:aa
wlan1: RX AssocResp from 00:17:9a:dc:5e:aa (capab=0x411 status=0 aid=1)
wlan1: invalid aid value 1; bits 15:14 not set
wlan1: associated
wlan1: switched to short barker preamble (BSSID=00:17:9a:dc:5e:aa)
ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
wlan1: switched to long barker preamble (BSSID=00:17:9a:dc:5e:aa)
wlan1: no IPv6 routers present
wlan1: deauthenticate(reason=3)
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Hardware] проблемы с RT2500
2008-04-15 4:43 ` Владимир
@ 2008-04-15 4:49 ` Владимир
2008-04-15 5:34 ` Михаил Якушин
1 sibling, 0 replies; 11+ messages in thread
From: Владимир @ 2008-04-15 4:49 UTC (permalink / raw)
To: hardware
wpa_supplicant.conf
взят с другого бука, там wifi интеловский, работает.
В сообщении от 15 апреля 2008 Владимир написал(a):
> # wpa_supplicant -D wext -i
> wlan1 -c /etc/net/ifaces/wlan1/wpa_supplicant.conf -w
> ioctl[SIOCSIWAUTH]: Operation not supported
> WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported
> WEXT auth param 5 value 0x1 - Trying to associate with 00:17:9a:dc:5e:aa
> (SSID='haw_home_wlan' freq=2412 MHz)
> ioctl[SIOCSIWAUTH]: Operation not supported
> WEXT auth param 5 value 0x1 - Associated with 00:17:9a:dc:5e:aa
> WPA: Key negotiation completed with 00:17:9a:dc:5e:aa [PTK=TKIP GTK=TKIP]
> CTRL-EVENT-CONNECTED - Connection to 00:17:9a:dc:5e:aa completed (auth)
> [id=0 id_str=]
> CTRL-EVENT-TERMINATING - signal 2 received
> ioctl[SIOCSIWAUTH]: Operation not supported
> WEXT auth param 5 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported
> WEXT auth param 4 value 0x0 -
>
> #dmesg
> ADDRCONF(NETDEV_UP): wlan1: link is not ready
> wlan1: Initial auth_alg=0
> wlan1: authenticate with AP 00:17:9a:dc:5e:aa
> wlan1: RX authentication from 00:17:9a:dc:5e:aa (alg=0 transaction=2
> status=0) wlan1: authenticated
> wlan1: associate with AP 00:17:9a:dc:5e:aa
> wlan1: RX AssocResp from 00:17:9a:dc:5e:aa (capab=0x411 status=0 aid=1)
> wlan1: invalid aid value 1; bits 15:14 not set
> wlan1: associated
> wlan1: switched to short barker preamble (BSSID=00:17:9a:dc:5e:aa)
> ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
> wlan1: switched to long barker preamble (BSSID=00:17:9a:dc:5e:aa)
> wlan1: no IPv6 routers present
> wlan1: deauthenticate(reason=3)
> _______________________________________________
> Hardware mailing list
> Hardware@lists.altlinux.org
> https://lists.altlinux.org/mailman/listinfo/hardware
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Hardware] проблемы с RT2500
2008-04-15 4:43 ` Владимир
2008-04-15 4:49 ` Владимир
@ 2008-04-15 5:34 ` Михаил Якушин
2008-04-15 7:21 ` Владимир
1 sibling, 1 reply; 11+ messages in thread
From: Михаил Якушин @ 2008-04-15 5:34 UTC (permalink / raw)
To: hardware
Владимир wrote:
> # wpa_supplicant -D wext -i
> wlan1 -c /etc/net/ifaces/wlan1/wpa_supplicant.conf -w
> ioctl[SIOCSIWAUTH]: Operation not supported
> WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported
> WEXT auth param 5 value 0x1 - Trying to associate with 00:17:9a:dc:5e:aa
> (SSID='haw_home_wlan' freq=2412 MHz)
> ioctl[SIOCSIWAUTH]: Operation not supported
> WEXT auth param 5 value 0x1 - Associated with 00:17:9a:dc:5e:aa
> WPA: Key negotiation completed with 00:17:9a:dc:5e:aa [PTK=TKIP GTK=TKIP]
> CTRL-EVENT-CONNECTED - Connection to 00:17:9a:dc:5e:aa completed (auth) [id=0
> id_str=]
> CTRL-EVENT-TERMINATING - signal 2 received
> ioctl[SIOCSIWAUTH]: Operation not supported
> WEXT auth param 5 value 0x0 - ioctl[SIOCSIWAUTH]: Operation not supported
> WEXT auth param 4 value 0x0 -
>
> #dmesg
> ADDRCONF(NETDEV_UP): wlan1: link is not ready
> wlan1: Initial auth_alg=0
> wlan1: authenticate with AP 00:17:9a:dc:5e:aa
> wlan1: RX authentication from 00:17:9a:dc:5e:aa (alg=0 transaction=2 status=0)
> wlan1: authenticated
> wlan1: associate with AP 00:17:9a:dc:5e:aa
> wlan1: RX AssocResp from 00:17:9a:dc:5e:aa (capab=0x411 status=0 aid=1)
> wlan1: invalid aid value 1; bits 15:14 not set
> wlan1: associated
> wlan1: switched to short barker preamble (BSSID=00:17:9a:dc:5e:aa)
> ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
> wlan1: switched to long barker preamble (BSSID=00:17:9a:dc:5e:aa)
> wlan1: no IPv6 routers present
> wlan1: deauthenticate(reason=3)
Похоже на багу в драйвере, в багзилу пожалуйста
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Hardware] проблемы с RT2500
2008-04-15 5:34 ` Михаил Якушин
@ 2008-04-15 7:21 ` Владимир
2008-04-15 9:10 ` Михаил Якушин
0 siblings, 1 reply; 11+ messages in thread
From: Владимир @ 2008-04-15 7:21 UTC (permalink / raw)
To: hardware
подключил ко всему этому ASUS usb 106g
Apr 15 11:17:35 haw_buk kernel: usb 1-2: new full speed USB device using
ohci_hcd and address 2
Apr 15 11:17:36 haw_buk kernel: usb 1-2: configuration #1 chosen from 1 choice
Apr 15 11:17:36 haw_buk kernel: usbcore: registered new interface driver
rt2500usb
Apr 15 11:17:37 haw_buk /etc/net: ERROR: /etc/net/scripts/ifup-removable: No
TYPE is specified for iface 'wmaster0' and can't guess automatically. Please
fix.
Apr 15 11:17:37 haw_buk /etc/net: ERROR: /etc/net/scripts/ifup-removable:
USE_HOTPLUG is disabled for wlan1
Apr 15 11:17:37 haw_buk /etc/net: ERROR: /etc/net/scripts/ifup-common: No TYPE
is specified for iface 'wmaster0' and can't guess automatically. Please fix.
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Hardware] проблемы с RT2500
2008-04-15 7:21 ` Владимир
@ 2008-04-15 9:10 ` Михаил Якушин
2008-05-14 17:15 ` Владимир
0 siblings, 1 reply; 11+ messages in thread
From: Михаил Якушин @ 2008-04-15 9:10 UTC (permalink / raw)
To: hardware
Владимир wrote:
> подключил ко всему этому ASUS usb 106g
>
> Apr 15 11:17:35 haw_buk kernel: usb 1-2: new full speed USB device using
> ohci_hcd and address 2
> Apr 15 11:17:36 haw_buk kernel: usb 1-2: configuration #1 chosen from 1 choice
> Apr 15 11:17:36 haw_buk kernel: usbcore: registered new interface driver
> rt2500usb
> Apr 15 11:17:37 haw_buk /etc/net: ERROR: /etc/net/scripts/ifup-removable: No
> TYPE is specified for iface 'wmaster0' and can't guess automatically. Please
> fix.
> Apr 15 11:17:37 haw_buk /etc/net: ERROR: /etc/net/scripts/ifup-removable:
> USE_HOTPLUG is disabled for wlan1
> Apr 15 11:17:37 haw_buk /etc/net: ERROR: /etc/net/scripts/ifup-common: No TYPE
> is specified for iface 'wmaster0' and can't guess automatically. Please fix.
wmaster0 это интерфейс специального назначения, эти сообщения можно в
принципе проигнорировать. А сетевуха то работает?
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2008-07-18 23:27 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-04-14 16:59 [Hardware] проблемы с RT2500 Владимир
2008-04-14 17:54 ` Михаил Якушин
2008-04-14 19:38 ` Владимир
2008-04-14 19:42 ` Михаил Якушин
2008-04-15 4:43 ` Владимир
2008-04-15 4:49 ` Владимир
2008-04-15 5:34 ` Михаил Якушин
2008-04-15 7:21 ` Владимир
2008-04-15 9:10 ` Михаил Якушин
2008-05-14 17:15 ` Владимир
2008-07-18 23:27 ` Aleksey Avdeev
ALT Linux hardware support
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \
hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org
public-inbox-index hardware
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.hardware
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git