* Re: [Hardware] драйвера на ноутбук Samsung R60plus
2008-04-07 3:30 ` Хихин Руслан
2008-04-07 3:46 ` Хихин Руслан
2008-04-07 8:15 ` Konstantin A. Lepikhov
@ 2008-04-07 21:31 ` ZiL-130
2008-04-07 21:42 ` Konstantin A. Lepikhov
2008-04-08 11:15 ` Sergey Vlasov
2 siblings, 2 replies; 11+ messages in thread
From: ZiL-130 @ 2008-04-07 21:31 UTC (permalink / raw)
To: hardware, hihin
[-- Attachment #1: Type: text/plain, Size: 1155 bytes --]
Хихин Руслан пишет:
> Здравствуйте ZiL-130
> В сообщении от 7 апреля 2008 ZiL-130 написал(a):
> > Доброго времени суток!
> > Есть такая проблема:
> > на ноутбук Samsung R60plus поставил ALT Linux 4.0 Personal
> > Desktop.Все
> > стало, только драйверов на сеть, видео, звук и т.д. нет.
> > ядро - 2.6.18-std-smp-alt12.
> > сетевая карта - Generic Marvell Yukon Chipset based Ethernet
> > Controller
> > видео - ATI Mobility Radeon X2300
> > чипсет - ATI SB600
> > звук - Realtek High definition Audio alc26x.
> > на офф. сайтах дров нет.
> > подскажите где можно найти?
> > Заранее спасибо.
> Есть у меня такой журнал - называется pciscan. Так вот - они не
> рассматривают вопросов по железу, если к ним не приложен вывод
> pciscan -v, lsmod и dmesg.
> PS обычно пользователи изучив эти что делают эти команды легко находят
> решения сами, кроме самых проблемных случаев :)
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Hardware mailing list
> Hardware@lists.altlinux.org
> https://lists.altlinux.org/mailman/listinfo/hardware
вот вывод комманд
[-- Attachment #2: command.txt --]
[-- Type: text/plain, Size: 25803 bytes --]
pciscan -v
Recommended driver Description
------------------ -----------
ati-agp ATI Technologies Inc Unknown device 7930 [Host bridge]
1002:7930:144d:c034 drivers: 15:ati-agp class:006:00:00
slot: 0000:00:00.0 hwid: C4EA3A9C09CD9617
shpchp ATI Technologies Inc Unknown device 7933 [PCI bridge Normal decode]
1002:7933 drivers: 7:shpchp class:006:04:00
slot: 0000:00:02.0 hwid: E90AC298AE37502E
shpchp ATI Technologies Inc Unknown device 7935 [PCI bridge Normal decode]
1002:7935 drivers: 7:shpchp class:006:04:00
slot: 0000:00:05.0 hwid: 490CC306AE3754B8
shpchp ATI Technologies Inc Unknown device 7936 [PCI bridge Normal decode]
1002:7936 drivers: 7:shpchp class:006:04:00
slot: 0000:00:06.0 hwid: 190FC3C9AE3756F3
shpchp ATI Technologies Inc Unknown device 7937 [PCI bridge Normal decode]
1002:7937 drivers: 7:shpchp class:006:04:00
slot: 0000:00:07.0 hwid: B90EC38CAE375735
ahci ATI Technologies Inc SB600 Non-Raid-5 SATA []
1002:4380:144d:c034 drivers: 24:ahci 7:ahci class:001:06:01
slot: 0000:00:12.0 hwid: C71053CF754E6AE3
ohci-hcd ATI Technologies Inc SB600 USB (OHCI0) [OHCI USB Controller]
1002:4387:144d:c034 drivers: 2.6|ohci-hcd 2.4|usb-ohci 7:ohci-hcd class:00c:03:10
slot: 0000:00:13.0 hwid: 13DD206A2DBE4526
ohci-hcd ATI Technologies Inc SB600 USB (OHCI1) [OHCI USB Controller]
1002:4388:144d:c034 drivers: 2.6|ohci-hcd 2.4|usb-ohci 7:ohci-hcd class:00c:03:10
slot: 0000:00:13.1 hwid: 7D06F061FDBFE2C3
ohci-hcd ATI Technologies Inc SB600 USB (OHCI2) [OHCI USB Controller]
1002:4389:144d:c034 drivers: 2.6|ohci-hcd 2.4|usb-ohci 7:ohci-hcd class:00c:03:10
slot: 0000:00:13.2 hwid: B9772ACA8DBD1EA8
ohci-hcd ATI Technologies Inc SB600 USB (OHCI3) [OHCI USB Controller]
1002:438a:144d:c034 drivers: 2.6|ohci-hcd 2.4|usb-ohci 7:ohci-hcd class:00c:03:10
slot: 0000:00:13.3 hwid: 6C92FFFA0DBCFAC5
ohci-hcd ATI Technologies Inc SB600 USB (OHCI4) [OHCI USB Controller]
1002:438b:144d:c034 drivers: 2.6|ohci-hcd 2.4|usb-ohci 7:ohci-hcd class:00c:03:10
slot: 0000:00:13.4 hwid: CA0090079DB8A84C
ehci-hcd ATI Technologies Inc SB600 USB Controller (EHCI) [EHCI USB Controller]
1002:4386:144d:c034 drivers: ehci-hcd 7:ehci-hcd class:00c:03:20
slot: 0000:00:13.5 hwid: 3E335A1A8F9EC344
unknown ATI Technologies Inc SB600 SMBus [SMBus]
1002:4385:144d:c034 drivers: not found class:00c:05:00
slot: 0000:00:14.0 hwid: C445C5051D764C06
atiixp ATI Technologies Inc SB600 IDE [IDE interface storage controller]
1002:438c:144d:c034 drivers: 24:atiixp 3:generic class:001:01:8a
slot: 0000:00:14.1 hwid: 6DDA4497DD31C0D7
unknown ATI Technologies Inc SB600 Azalia []
1002:4383:144d:c034 drivers: not found class:004:03:00
slot: 0000:00:14.2 hwid: 1FAA3B12DD847E90
unknown ATI Technologies Inc SB600 PCI to LPC Bridge [ISA bridge]
1002:438d:144d:c034 drivers: not found class:006:01:00
slot: 0000:00:14.3 hwid: 43334703947F0C83
unknown ATI Technologies Inc SB600 PCI to PCI Bridge [PCI bridge Subtractive decode]
1002:4384 drivers: not found class:006:04:01
slot: 0000:00:14.4 hwid: F47BF24D031A35EC
unknown Unknown device 0001:7188 [VGA compatible controller]
0001:7188:144d:c034 drivers: not found class:003:00:00
slot: 0000:01:00.0 hwid: 0312AFD7BB42D1A0
unknown Unknown device 0001:001c [Ethernet controller]
0001:001c:144f:7131 drivers: not found class:002:00:00
slot: 0000:02:00.0 hwid: DF7641858A4A2B32
unknown Unknown device 0001:4353 [Ethernet controller]
0001:4353:144d:c034 drivers: not found class:002:00:00
slot: 0000:05:00.0 hwid: 82789238893F96B3
lsmod
Module Size Used by
binfmt_misc 15752 1
cpufreq_powersave 6016 0
cpufreq_conservative 11656 0
cpufreq_ondemand 10764 0
cpufreq_userspace 8832 0
ac 9476 0
thermal 18696 0
processor 31592 1 thermal
fan 8964 0
button 10896 0
battery 14468 0
fuse 51336 4
dm_mod 60440 0
rfcomm 45592 0
l2cap 31104 5 rfcomm
usbhid 51040 0
hci_usb 20764 2
bluetooth 57700 7 rfcomm,l2cap,hci_usb
joydev 13504 0
tsdev 11840 0
ohci_hcd 23428 0
ehci_hcd 34952 0
ide_cd 42272 0
psmouse 41992 0
usbcore 129028 5 usbhid,hci_usb,ohci_hcd,ehci_hcd
ati_agp 13196 0
cdrom 38432 1 ide_cd
agpgart 37960 1 ati_agp
pcspkr 7296 0
serio_raw 11140 0
evdev 13568 2
rtc 17204 0
sg 37660 0
ext3 135688 2
jbd 69032 1 ext3
mbcache 12804 1 ext3
ahci 25476 5
libata 104084 1 ahci
sd_mod 24576 6
scsi_mod 137352 4 sg,ahci,libata,sd_mod
ide_disk 20352 0
ide_generic 5504 0 [permanent]
generic 8964 0 [permanent]
atiixp 10384 0 [permanent]
ide_core 127560 5 ide_cd,ide_disk,ide_generic,generic,atiixp
dmesg
Linux version 2.6.18-ovz-smp-alt23 (builder@people.armor.altlinux.org) (gcc version 4.1.2 20070626 (ALT Linux, build 4.1.2-alt1)) #1 SMP Mon Feb 25 01:56:25 MSK 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fe90000 (usable)
BIOS-e820: 000000007fe90000 - 000000007fe9b000 (ACPI data)
BIOS-e820: 000000007fe9b000 - 000000007fe9d000 (ACPI NVS)
BIOS-e820: 000000007fe9d000 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
1150MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f7af0
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 523920
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 294544 pages, LIFO batch:31
DMI present.
ACPI: RSDP (v002 PTLTD ) @ 0x000f7a40
ACPI: XSDT (v001 SECCSD LH43STAR 0x06040000 LTP 0x00000000) @ 0x7fe932e2
ACPI: FADT (v003 SEC PRAHA 0x06040000 SEC 0x000f4240) @ 0x7fe9ad06
ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x7fe9adfa
ACPI: MCFG (v001 PTLTD MCFG 0x06040000 LTP 0x00000000) @ 0x7fe9ae4e
ACPI: SLIC (v001 SECCSD LH43STAR 0x06040000 LTP 0x00000000) @ 0x7fe9ae8a
ACPI: SSDT (v001 PmRef Cpu0Tst 0x00003000 INTL 0x20050228) @ 0x7fe93957
ACPI: SSDT (v001 PmRef Cpu1Tst 0x00003000 INTL 0x20050228) @ 0x7fe938b1
ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050228) @ 0x7fe9333e
ACPI: DSDT (v001 ATI SB600 0x06040000 INTL 0x20050228) @ 0x00000000
ATI board detected. Disabling timer routing over 8254.
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
Detected 1995.198 MHz processor.
Built 1 zonelists. Total pages: 523920
Kernel command line: auto BOOT_IMAGE=ALTLinux ro root=UUID=9c8365ea-ed3c-4414-9f22-6e93ecc904cc resume=/dev/sda6 panic=30 splash=silent
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2071440k/2095680k available (1644k kernel code, 23064k reserved, 673k data, 200k init, 1178176k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3993.48 BogoMIPS (lpj=7986968)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebf3ff 20000000 00000000 00000940 0000e3bd 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 16k freed
Page beancounter hash is 131072 entries.
checking if image is initramfs... it is
Freeing initrd memory: 458k freed
ACPI: Core revision 20060707
ACPI: Looking for DSDT in initramfs... /DSDT.aml does not exist.
CPU0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d
Booting processor 1/1 eip 2000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3990.28 BogoMIPS (lpj=7980575)
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebf3ff 20000000 00000000 00000940 0000e3bd 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d
Total of 2 processors activated (7983.77 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ... failed.
...trying to set up timer as Virtual Wire IRQ... works.
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
migration_cost=43
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
Boot video device is 0000:01:00.0
Device 0000:08:00.0 not responding
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB2_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 10) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 5) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 5) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 5) *0, disabled.
ACPI: Embedded Controller [H_EC] (gpe 3) interrupt mode.
ACPI: Power Resource [FN00] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Cannot allocate resource region 7 of bridge 0000:00:07.0
PCI: Cannot allocate resource region 8 of bridge 0000:00:07.0
pnp: 00:08: ioport range 0x1080-0x1080 has been reserved
pnp: 00:08: ioport range 0x220-0x22f has been reserved
pnp: 00:08: ioport range 0x40b-0x40b has been reserved
PCI: Bridge: 0000:00:02.0
IO window: 9000-9fff
MEM window: d8000000-d80fffff
PREFETCH window: d0000000-d7ffffff
PCI: Bridge: 0000:00:05.0
IO window: disabled.
MEM window: d8100000-d81fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:06.0
IO window: a000-afff
MEM window: d8200000-d82fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:07.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:14.4
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:00:05.0 to 64
PCI: Setting latency timer of device 0000:00:06.0 to 64
PCI: Setting latency timer of device 0000:00:07.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1207608209.324:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
Allocate Port Service[0000:00:02.0:pcie03]
PCI: Setting latency timer of device 0000:00:05.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:05.0:pcie00]
Allocate Port Service[0000:00:05.0:pcie03]
PCI: Setting latency timer of device 0000:00:06.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:06.0:pcie00]
Allocate Port Service[0000:00:06.0:pcie03]
PCI: Setting latency timer of device 0000:00:07.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:07.0:pcie00]
Allocate Port Service[0000:00:07.0:pcie03]
vesafb: framebuffer at 0xd0000000, mapped to 0xf8900000, using 1875k, total 16384k
vesafb: mode is 800x600x16, linelength=1600, pages=16
vesafb: protected mode interface info at c000:ab94
vesafb: pmi: set display start = c00cac1c, set palette = c00cacd8
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
NET: Registered protocol family 1
Using IPI Shortcut mode
Freeing unused kernel memory: 200k freed
Time: tsc clocksource has been installed.
Executing init=/init
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SB600_PATA: IDE controller at PCI slot 0000:00:14.1
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 217
input: AT Translated Set 2 keyboard as /class/input/input0
SB600_PATA: chipset revision 0
SB600_PATA: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x8420-0x8427, BIOS settings: hda:DMA, hdb:pio
Probing IDE interface ide0...
hda: TSSTcorp CDDVDW TS-L632H, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
SCSI subsystem initialized
libata version 2.00 loaded.
ahci 0000:00:12.0: version 2.0
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 225
ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:12.0: flags: ncq ilck pm led clo pmp pio slum part
ata1: SATA max UDMA/133 cmd 0xF889C100 ctl 0x0 bmdma 0x0 irq 225
ata2: SATA max UDMA/133 cmd 0xF889C180 ctl 0x0 bmdma 0x0 irq 225
ata3: SATA max UDMA/133 cmd 0xF889C200 ctl 0x0 bmdma 0x0 irq 225
ata4: SATA max UDMA/133 cmd 0xF889C280 ctl 0x0 bmdma 0x0 irq 225
scsi0 : ahci
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8, max UDMA/133, 312581808 sectors: LBA48 NCQ (depth 31/32)
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/133
scsi1 : ahci
ata2: SATA link down (SStatus 0 SControl 300)
scsi2 : ahci
ata3: SATA link down (SStatus 0 SControl 300)
scsi3 : ahci
ata4: SATA link down (SStatus 0 SControl 300)
Vendor: ATA Model: Hitachi HTS54251 Rev: BBCO
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda4 < sda5 sda6 sda7 sda8 >
sd 0:0:0:0: Attached scsi disk sda
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
sd 0:0:0:0: Attached scsi generic sg0 type 0
Real Time Clock Driver v1.12ac
input: PC Speaker as /class/input/input1
Linux agpgart interface v0.102 (c) Dave Jones
usbcore: registered new driver usbfs
usbcore: registered new driver hub
hda: ATAPI 63X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 233
ehci_hcd 0000:00:13.5: EHCI Host Controller
ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.5: debug port 1
ehci_hcd 0000:00:13.5: irq 233, io mem 0xd8509400
ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 217
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 217, io mem 0xd8504000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 50
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 50, io mem 0xd8505000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 58
ohci_hcd 0000:00:13.2: OHCI Host Controller
ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.2: irq 58, io mem 0xd8506000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04713/0x200000
ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 50
ohci_hcd 0000:00:13.3: OHCI Host Controller
ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.3: irq 50, io mem 0xd8507000
input: SynPS/2 Synaptics TouchPad as /class/input/input2
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ts: Compaq touchscreen protocol output
ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 58
ohci_hcd 0000:00:13.4: OHCI Host Controller
ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.4: irq 58, io mem 0xd8508000
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb 4-2: new full speed USB device using ohci_hcd and address 2
usb 4-2: configuration #1 chosen from 1 choice
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.9
usb 6-1: new low speed USB device using ohci_hcd and address 2
usb 6-1: configuration #1 chosen from 1 choice
usbcore: registered new driver hci_usb
usbcore: registered new driver hiddev
input: Logitech USB-PS/2 Optical Mouse as /class/input/input3
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.4-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Adding 4144728k swap on /dev/sda6. Priority:-1 extents:1 across:4144728k
EXT3 FS on sda7, internal journal
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.7)
audit(1207597435.915:2): audit_pid=3024 old=0 by auid=4294967295
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Lid Switch [LID0]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Transitioning device [FAN0] to D3
ACPI: Transitioning device [FAN0] to D3
ACPI: Fan [FAN0] (off)
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 2 throttling states)
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707]
ACPI: CPU1 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU1] (supports 2 throttling states)
ACPI: Thermal Zone [TZ00] (48 C)
ACPI: Thermal Zone [TZ01] (48 C)
Time: acpi_pm clocksource has been installed.
ACPI: AC Adapter [ADP1] (on-line)
lspci
00:00.0 Host bridge: ATI Technologies Inc Unknown device 7930
00:02.0 PCI bridge: ATI Technologies Inc Unknown device 7933
00:05.0 PCI bridge: ATI Technologies Inc Unknown device 7935
00:06.0 PCI bridge: ATI Technologies Inc Unknown device 7936
00:07.0 PCI bridge: ATI Technologies Inc Unknown device 7937
00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA
00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0)
00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1)
00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2)
00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3)
00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4)
00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI)
00:14.0 SMBus: ATI Technologies Inc SB600 SMBus (rev 14)
00:14.1 IDE interface: ATI Technologies Inc SB600 IDE
00:14.2 Audio device: ATI Technologies Inc SB600 Azalia
00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge
00:14.4 PCI bridge: ATI Technologies Inc SB600 PCI to PCI Bridge
01:00.0 VGA compatible controller: Unknown device 0001:7188
02:00.0 Ethernet controller: Unknown device 0001:001c (rev 01)
^ permalink raw reply [flat|nested] 11+ messages in thread