* [Hardware] IDE drives errors
@ 2007-08-06 7:21 Aleksey Korotkov
0 siblings, 0 replies; only message in thread
From: Aleksey Korotkov @ 2007-08-06 7:21 UTC (permalink / raw)
To: hardware
[-- Attachment #1: Type: text/plain, Size: 1266 bytes --]
Здравствуйте.
Приобрёл в конце прошлого года новый HDD от WD на 250GB. Через
некоторое время он по smartctl стал показывать ошибки (вложение
hda.txt). Чем это грозит, к чему готовиться?
Весьма беспокоит также и то, что Reallocated_Sector_Ct ненулевое
значение имеет, и, хотя и медленно, но увеличивается (несколько месяцев
назад было 4, сейчас 5).
И ещё в логах вот такое безобразие (вложение log.txt). hdc -- HDD от
IBM (вложение hdc.txt). hdg -- DVD-ROM от ASUS, висящий на контроллере
Promise Ultra100 TX2.
Используемое ядро:
ziga@debian:~$ uname -a
Linux debian 2.6.22.1-custom4 #1 SMP Thu Aug 2 23:24:11 SAMST 2007 i686
GNU/Linux
Прочитал вот это:
http://www.captain.at/howto-linux-driveready-seekcomplete-error-drivestatuserror.php
но так и не понял, что мне с этим теперь делать.
--
С уважением,
А.В.Коротков,
mailto:ziga@uni.udm.ru
[-- Attachment #2: hda.txt --]
[-- Type: text/plain, Size: 8915 bytes --]
smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar SE family
Device Model: WDC WD2500JB-00REA0
Serial Number: WD-WCANK9147241
Firmware Version: 20.00K20
User Capacity: 250.059.350.016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Mon Aug 6 11:49:13 2007 SAMST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (8280) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 96) minutes.
Conveyance self-test routine
recommended polling time: ( 6) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 1
3 Spin_Up_Time 0x0003 193 189 021 Pre-fail Always - 5350
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 206
5 Reallocated_Sector_Ct 0x0033 199 199 140 Pre-fail Always - 5
7 Seek_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0
9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 4898
10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 100 100 051 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 200
194 Temperature_Celsius 0x0022 110 104 000 Old_age Always - 40
196 Reallocated_Event_Count 0x0032 199 199 000 Old_age Always - 1
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 1
198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0
SMART Error Log Version: 1
ATA Error Count: 11 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 11 occurred at disk power-on lifetime: 943 hours (39 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 b6 e0 fd e0 Error: UNC 8 sectors at LBA = 0x00fde0b6 = 16638134
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 d0 08 b6 e0 fd 0b 58 03:14:00.710 READ DMA EXT
25 d0 10 c6 e0 fd 0b 58 03:14:00.695 READ DMA EXT
35 d0 01 b6 8d 50 0b 58 03:14:00.690 WRITE DMA EXT
35 d0 01 c6 3d 50 0b 58 03:14:00.675 WRITE DMA EXT
35 d0 01 a6 3d 50 0b 58 03:14:00.675 WRITE DMA EXT
Error 10 occurred at disk power-on lifetime: 943 hours (39 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 10 b6 e0 fd e0 Error: UNC 16 sectors at LBA = 0x00fde0b6 = 16638134
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 d0 10 b6 e0 fd 0b 58 03:13:58.730 READ DMA EXT
25 d0 01 48 bb e7 14 58 03:13:58.730 READ DMA EXT
25 d0 01 d5 b0 67 12 58 03:13:58.730 READ DMA EXT
25 d0 01 62 a6 e7 0f 58 03:13:58.730 READ DMA EXT
25 d0 01 61 b7 d7 0f 58 03:13:58.730 READ DMA EXT
Error 9 occurred at disk power-on lifetime: 943 hours (39 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 20 b6 e0 fd e0 Error: UNC 32 sectors at LBA = 0x00fde0b6 = 16638134
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 d0 20 b6 e0 fd 0b 58 03:13:56.655 READ DMA EXT
25 d0 01 bb c5 67 17 58 03:13:56.655 READ DMA EXT
25 d0 20 96 e0 fd 0b 58 03:13:56.035 READ DMA EXT
25 d0 01 48 bb e7 14 58 03:13:56.035 READ DMA EXT
25 d0 01 d5 b0 67 12 58 03:13:56.035 READ DMA EXT
Error 8 occurred at disk power-on lifetime: 943 hours (39 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 40 96 e0 fd e0 Error: UNC 64 sectors at LBA = 0x00fde096 = 16638102
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 d0 40 96 e0 fd 0b 58 03:13:53.815 READ DMA EXT
25 d0 40 56 e0 fd 0b 58 03:13:53.810 READ DMA EXT
25 d0 01 bb c5 67 17 58 03:13:53.810 READ DMA EXT
25 d0 01 48 bb e7 14 58 03:13:53.810 READ DMA EXT
25 d0 01 d5 b0 67 12 58 03:13:53.810 READ DMA EXT
Error 7 occurred at disk power-on lifetime: 943 hours (39 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 80 56 e0 fd e0 Error: UNC 128 sectors at LBA = 0x00fde056 = 16638038
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 d0 80 56 e0 fd 0b 58 03:13:51.850 READ DMA EXT
25 d0 80 d6 e1 fd 0b 58 03:13:51.840 READ DMA EXT
25 d0 80 56 e1 fd 0b 58 03:13:51.830 READ DMA EXT
25 d0 01 bb c5 67 17 58 03:13:51.830 READ DMA EXT
25 d0 01 48 bb e7 14 58 03:13:51.830 READ DMA EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 9 -
# 2 Short offline Completed without error 00% 8 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
[-- Attachment #3: log.txt --]
[-- Type: text/plain, Size: 413 bytes --]
Aug 1 23:54:55 localhost kernel: hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
Aug 1 23:54:55 localhost kernel: hdc: drive_cmd: error=0x04 { DriveStatusError }
Aug 1 23:54:55 localhost kernel: ide: failed opcode was: 0xef
Jul 27 08:30:24 localhost kernel: hdg: status error: status=0x58 { DriveReady SeekComplete DataRequest }
Jul 27 08:30:24 localhost kernel: ide: failed opcode was: unknown
[-- Attachment #4: hdc.txt --]
[-- Type: text/plain, Size: 4239 bytes --]
smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: IBM Deskstar 40GV & 75GXP series (all other firmware)
Device Model: IBM-DTLA-307015
Serial Number: YF0YFL92134
Firmware Version: TX2OA50C
User Capacity: 15.361.597.440 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 5
ATA Standard is: ATA/ATAPI-5 T13 1321D revision 1
Local Time is: Mon Aug 6 11:49:20 2007 SAMST
==> WARNING: IBM Deskstar 40GV and 75GXP drives may need upgraded SMART firmware.
Please see http://www.geocities.com/dtla_update/ and
http://www-3.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-42215 or
http://www-1.ibm.com/support/docview.wss?uid=psg1MIGR-42215
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (1231) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 10) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 060 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 147 147 024 Pre-fail Always - 100 (Average 103)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 2461
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 095 095 000 Old_age Always - 38395
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2445
192 Power-Off_Retract_Count 0x0032 098 098 050 Old_age Always - 2461
193 Load_Cycle_Count 0x0012 098 098 050 Old_age Always - 2461
194 Temperature_Celsius 0x0002 137 137 000 Old_age Always - 40
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 6120 -
# 2 Short offline Completed without error 00% 3447 -
Device does not support Selective Self Tests/Logging
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2007-08-06 7:21 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-08-06 7:21 [Hardware] IDE drives errors Aleksey Korotkov
ALT Linux hardware support
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \
hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org
public-inbox-index hardware
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.hardware
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git