* [Hardware] объясните про SATA @ 2007-05-17 9:07 Artem Zolochevskiy 2007-05-17 9:21 ` Motsyo Gennadi aka Drool ` (2 more replies) 0 siblings, 3 replies; 5+ messages in thread From: Artem Zolochevskiy @ 2007-05-17 9:07 UTC (permalink / raw) To: hardware hi all Я не очень в железе, так что просвещайте... в IDE есть каналы, и вроде как рекомендуется вешать устройства на разные каналы (шлейфы) для увеличения производительности. а как с SATA? там все равны? вот у меня 6 разъёмов под SATA диски - куда хош их тыкать? -- Artem Zolochevskiy Kaliningrad, Russia JID: az@jabber.org ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Hardware] объясните про SATA 2007-05-17 9:07 [Hardware] объясните про SATA Artem Zolochevskiy @ 2007-05-17 9:21 ` Motsyo Gennadi aka Drool 2007-05-17 9:22 ` Alexander Volkov 2007-05-17 9:32 ` Sergey Vlasov 2 siblings, 0 replies; 5+ messages in thread From: Motsyo Gennadi aka Drool @ 2007-05-17 9:21 UTC (permalink / raw) To: hardware Artem Zolochevskiy пишет: > hi all > > Я не очень в железе, так что просвещайте... > в IDE есть каналы, и вроде как рекомендуется вешать устройства на разные > каналы (шлейфы) для увеличения производительности. > а как с SATA? там все равны? вот у меня 6 разъёмов под SATA диски - куда хош > их тыкать? Мне кажется, что правильнее загрузочный винт цеплять самым первым. Я не знаю как разрулится загрузка, если перед загрузочным не первым Вы вдруг подкинете другой, первый... А так - никакой разницы. ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Hardware] объясните про SATA 2007-05-17 9:07 [Hardware] объясните про SATA Artem Zolochevskiy 2007-05-17 9:21 ` Motsyo Gennadi aka Drool @ 2007-05-17 9:22 ` Alexander Volkov 2007-05-17 9:32 ` Sergey Vlasov 2 siblings, 0 replies; 5+ messages in thread From: Alexander Volkov @ 2007-05-17 9:22 UTC (permalink / raw) To: hardware On 2007-05-17 12:07:41 +0300, Artem Zolochevskiy wrote: AZ> hi all AZ> Я не очень в железе, так что просвещайте... AZ> в IDE есть каналы, и вроде как рекомендуется вешать устройства на разные AZ> каналы (шлейфы) для увеличения производительности. AZ> а как с SATA? там все равны? вот у меня 6 разъёмов под SATA диски - куда хош AZ> их тыкать? да, специально упростили, чтоб не объяснять потОм :). 1 порт - 1 устройство. -- Regards, Alexander ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Hardware] объясните про SATA 2007-05-17 9:07 [Hardware] объясните про SATA Artem Zolochevskiy 2007-05-17 9:21 ` Motsyo Gennadi aka Drool 2007-05-17 9:22 ` Alexander Volkov @ 2007-05-17 9:32 ` Sergey Vlasov 2007-05-17 10:09 ` Artem Zolochevskiy 2 siblings, 1 reply; 5+ messages in thread From: Sergey Vlasov @ 2007-05-17 9:32 UTC (permalink / raw) To: hardware [-- Attachment #1: Type: text/plain, Size: 757 bytes --] On Thu, May 17, 2007 at 12:07:41PM +0300, Artem Zolochevskiy wrote: > в IDE есть каналы, и вроде как рекомендуется вешать устройства на разные > каналы (шлейфы) для увеличения производительности. > а как с SATA? там все равны? вот у меня 6 разъёмов под SATA диски - куда хош > их тыкать? На нормальных контроллерах SATA все порты работают независимо; исключением может быть случай, когда контроллер работает в режиме совместимости с IDE - в этом случае два порта SATA могут видеться как один канал IDE с двумя устройствами (master и slave), и обмен с этими устройствами будет возможен только по очереди. В dmesg в подобной ситуации будут видны два устройства на одном порту - ataN.0 и ataN.1; обычно в случае SATA присутствует только ataN.0. [-- Attachment #2: Digital signature --] [-- Type: application/pgp-signature, Size: 189 bytes --] ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Hardware] объясните про SATA 2007-05-17 9:32 ` Sergey Vlasov @ 2007-05-17 10:09 ` Artem Zolochevskiy 0 siblings, 0 replies; 5+ messages in thread From: Artem Zolochevskiy @ 2007-05-17 10:09 UTC (permalink / raw) To: hardware Sergey Vlasov wrote: > On Thu, May 17, 2007 at 12:07:41PM +0300, Artem Zolochevskiy wrote: >> в IDE есть каналы, и вроде как рекомендуется вешать устройства на разные >> каналы (шлейфы) для увеличения производительности. >> а как с SATA? там все равны? вот у меня 6 разъёмов под SATA диски - куда >> хош их тыкать? > > На нормальных контроллерах SATA все порты работают независимо; > исключением может быть случай, когда контроллер работает в режиме > совместимости с IDE - в этом случае два порта SATA могут видеться как > один канал IDE с двумя устройствами (master и slave), и обмен с этими > устройствами будет возможен только по очереди. В dmesg в подобной > ситуации будут видны два устройства на одном порту - ataN.0 и ataN.1; > обычно в случае SATA присутствует только ataN.0. ага, вот оно как! я верно понял, что у меня всё в порядке и каждый из 4-х хардов живёт сам по себе и никому не мешает. libata version 2.00 loaded. ata1: SATA max UDMA/133 cmd 0xF88B2900 ctl 0x0 bmdma 0x0 irq 233 ata2: SATA max UDMA/133 cmd 0xF88B2980 ctl 0x0 bmdma 0x0 irq 233 ata3: SATA max UDMA/133 cmd 0xF88B2A00 ctl 0x0 bmdma 0x0 irq 233 ata4: SATA max UDMA/133 cmd 0xF88B2A80 ctl 0x0 bmdma 0x0 irq 233 ata5: SATA max UDMA/133 cmd 0xF88B2B00 ctl 0x0 bmdma 0x0 irq 233 ata6: SATA max UDMA/133 cmd 0xF88B2B80 ctl 0x0 bmdma 0x0 irq 233 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7, max UDMA/133, 312581808 sectors: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATA-7, max UDMA/133, 312581808 sectors: LBA48 NCQ (depth 31/32) ata2.00: configured for UDMA/133 ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata5.00: ATA-7, max UDMA/133, 312581808 sectors: LBA48 NCQ (depth 31/32) ata5.00: configured for UDMA/133 ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata6.00: ATA-7, max UDMA/133, 312581808 sectors: LBA48 NCQ (depth 31/32) ata6.00: configured for UDMA/133 Vendor: ATA Model: ST3160811AS Rev: 3.AA Vendor: ATA Model: ST3160811AS Rev: 3.AA Vendor: ATA Model: ST3160811AS Rev: 3.AA Vendor: ATA Model: ST3160811AS Rev: 3.AA ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode ata7: SATA max UDMA/133 cmd 0xF88B4100 ctl 0x0 bmdma 0x0 irq 169 ata8: SATA max UDMA/133 cmd 0xF88B4180 ctl 0x0 bmdma 0x0 irq 169 ata7: SATA link down (SStatus 0 SControl 300) ata8: SATA link down (SStatus 0 SControl 300 -- Artem Zolochevskiy Kaliningrad, Russia JID: az@jabber.org ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2007-05-17 10:09 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2007-05-17 9:07 [Hardware] объясните про SATA Artem Zolochevskiy 2007-05-17 9:21 ` Motsyo Gennadi aka Drool 2007-05-17 9:22 ` Alexander Volkov 2007-05-17 9:32 ` Sergey Vlasov 2007-05-17 10:09 ` Artem Zolochevskiy
ALT Linux hardware support This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \ hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org public-inbox-index hardware Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.hardware AGPL code for this site: git clone https://public-inbox.org/public-inbox.git