From: Sergey Vlasov <vsu@altlinux.ru> To: hardware@lists.altlinux.org Subject: Re: [Hardware] udma для SATA диска Date: Wed, 2 May 2007 21:09:40 +0400 Message-ID: <20070502170940.GA4841@procyon.home> (raw) In-Reply-To: <4638C18B.3090303@micmedia.ru> [-- Attachment #1: Type: text/plain, Size: 1430 bytes --] On Wed, May 02, 2007 at 08:51:23PM +0400, Alexei V. Mezin wrote: > Есть материнка, на которой > 02:00.0 Mass storage controller: Silicon Image, Inc. SiI 3132 Serial ATA > Raid II Controller (rev 01) > > куда подключен 320Гб Seagete SATA (ST3320620AS). Вот как это выглядит в > dmesg: > > ata6: SATA max UDMA/100 cmd 0xF0862000 ctl 0x0 bmdma 0x0 irq 233 ... > ata6.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 31/32) ... > ata6.00: configured for UDMA/100 ... > Смущает UDMA/100. Почему 100, а не 133? В старом драйвере siimage в комментариях содержится предупреждение о возможной несовместимости при использовании некоторых мостов SATA/PATA (с чипами от Marvell): * FAQ Items: * If you are using Marvell SATA-IDE adapters with Maxtor drives * ensure the system is set up for ATA100/UDMA5 not UDMA6. Подобные мосты, помимо отдельных устройств, встречались также в первых дисках с интерфейсом SATA, представлявших собой просто адаптацию старых моделей с интерфейсом IDE путём добавления моста. В sata_sil поддержка UDMA/133 просто отключена полностью для надёжности - реально выбор режима имеет значение только при использовании мостов SATA/PATA, при использовании современных SATA-дисков выбор режима 100 или 133 вообще ни на что не влияет (но всё равно производится, поскольку надёжно определить наличие или отсутствие моста в общем случае довольно сложно). [-- Attachment #2: Digital signature --] [-- Type: application/pgp-signature, Size: 189 bytes --]
next prev parent reply other threads:[~2007-05-02 17:09 UTC|newest] Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top 2007-05-02 16:51 Alexei V. Mezin 2007-05-02 17:09 ` Sergey Vlasov [this message] 2007-05-02 18:14 ` Alexei V. Mezin
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20070502170940.GA4841@procyon.home \ --to=vsu@altlinux.ru \ --cc=hardware@lists.altlinux.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux hardware support This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \ hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org public-inbox-index hardware Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.hardware AGPL code for this site: git clone https://public-inbox.org/public-inbox.git