* Re: [Hardware] SATA RAID на HP ML150
2007-02-04 14:53 [Hardware] SATA RAID на HP ML150 Grigory Gorshkov
@ 2007-02-04 16:55 ` Sergey Vlasov
0 siblings, 0 replies; 2+ messages in thread
From: Sergey Vlasov @ 2007-02-04 16:55 UTC (permalink / raw)
To: hardware
[-- Attachment #1: Type: text/plain, Size: 1631 bytes --]
On Sun, Feb 04, 2007 at 05:53:59PM +0300, Grigory Gorshkov wrote:
> Суть проблемы - на сервере HP ProLiant ML150 G3 есть встроенный
> 6-канальный SATA RAID контроллер от Adaptec.
Теперь внимательно читаем
http://h10010.www1.hp.com/wwpc/us/en/ss/WF06a/15351-241434-241477-241477-f82-1163831.html
и видим там:
Storage controller: Motherboard 6 port SATA controller. Optional HP 8
port SAS/SATA HBA with RAID
Хотя на странице Overview там написано "Embedded SATA RAID 0,1 for
value RAID functionality", на самом деле этот RAID там чисто
программный. Причём, скорее всего, это какой-то из Intel ICHx и кусок
BIOS от Adaptec (например, у Supermicro на некоторых матерях можно
выбирать, использовать ICH как просто SATA, RAID с биосом от Intel или
от Adaptec).
> В BIOS настроил 1 одиночный диск и 3 в RAID-0. При установке ALT3
> Compact массив не виден - наблюдаются только четыре раздельных
> жестких диска.
Значит, контроллер SATA в этой версии ядра поддерживается. А вот
поддержки подобных программных RAID в этом дистрибутиве нет. Впрочем,
возиться с dmraid, где этот RAID с некоторой вероятностью как-то
поддерживается, вряд ли стоит - проще сразу настраивать md.
> После установки Linux-a на первый диск пытался прикрутить драйвера
> от RH :) - безрезультатно. Ядро 2-6-18. Помогите- не охота ставить
> софтовый RAID.
Он там и есть софтовый - за несофтовый надо платить отдельно. А
драйвер для RH, если и существует в виде, допускающем пересборку под
другое ядро, скорее всего, содержит несвободные компоненты,
распространяемые только в бинарном виде - лучше с ним не связываться.
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread