ALT Linux hardware support
 help / color / mirror / Atom feed
* [Hardware] Какое состояние винтов по SMART_у
@ 2006-11-03 16:55 Sharavin Sergey
  2006-11-03 20:15 ` Michael Shigorin
  0 siblings, 1 reply; 17+ messages in thread
From: Sharavin Sergey @ 2006-11-03 16:55 UTC (permalink / raw)
  To: Hardware

[-- Attachment #1: Type: text/plain, Size: 246 bytes --]

Здравствуйте.
Подскажите пожалуста какое состояние у винтов ?
Не пора ли менять :)
Тесты в аттаче для каждого винта.
И на какой параметр надо обращать внимание, не на "RAW_VALUE"
И его значение, больше хуже или наоборот ?

С уважением.
Сергей.
 

[-- Attachment #2: 1.txt --]
[-- Type: text/plain, Size: 6171 bytes --]

 
# smartctl -a -d ata /dev/sda
smartctl version 5.36 [i586-alt-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Caviar SE (Serial ATA) family
Device Model:     WDC WD2000JD-00HBB0
Serial Number:    WD-WMAL81563094
Firmware Version: 08.02D08
User Capacity:    200 049 647 616 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   6
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Fri Nov  3 22:48:43 2006 NOVT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84) Offline data collection activity
                                        was suspended by an interrupting command from host.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                 (5785) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        No General Purpose Logging support.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  75) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   200   147   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0007   129   126   021    Pre-fail  Always       -       6050
  4 Start_Stop_Count        0x0032   099   099   040    Old_age   Always       -       1482
  5 Reallocated_Sector_Ct   0x0033   199   199   140    Pre-fail  Always       -       1
  7 Seek_Error_Rate         0x000b   200   200   051    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   094   094   000    Old_age   Always       -       4852
 10 Spin_Retry_Count        0x0013   100   100   051    Pre-fail  Always       -       0
 11 Calibration_Retry_Count 0x0013   100   100   051    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1481
194 Temperature_Celsius     0x0022   111   094   000    Old_age   Always       -       39
196 Reallocated_Event_Count 0x0032   199   199   000    Old_age   Always       -       1
197 Current_Pending_Sector  0x0012   200   200   000    Old_age   Always       -       1
198 Offline_Uncorrectable   0x0012   200   200   000    Old_age   Always       -       1
199 UDMA_CRC_Error_Count    0x000a   200   253   000    Old_age   Always       -       31
200 Multi_Zone_Error_Rate   0x0009   200   199   051    Pre-fail  Offline      -       0

SMART Error Log Version: 1
ATA Error Count: 1
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 1 occurred at disk power-on lifetime: 3974 hours (165 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 da 5a 3f e0  Error: UNC 8 sectors at LBA = 0x003f5ada = 4152026

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 da 5a 3f 14 00      00:01:01.550  READ DMA EXT
  25 00 08 da 5a 3b 14 00      00:01:01.550  READ DMA EXT
  25 00 08 da 5a 37 14 00      00:01:01.550  READ DMA EXT
  25 00 08 da 5a 33 14 00      00:01:01.550  READ DMA EXT
  25 00 08 da 5a 2f 14 00      00:01:01.550  READ DMA EXT

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%        43         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

[-- Attachment #3: 2.txt --]
[-- Type: text/plain, Size: 4745 bytes --]

 
# smartctl -a /dev/hda
smartctl version 5.36 [i586-alt-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.7 and 7200.7 Plus family
Device Model:     ST3120026A
Serial Number:    3JT1LGXF
Firmware Version: 3.06
User Capacity:    120 034 123 776 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   6
ATA Standard is:  ATA/ATAPI-6 T13 1410D revision 2
Local Time is:    Fri Nov  3 22:50:25 2006 NOVT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                 ( 430) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        No General Purpose Logging support.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        (  85) minutes.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   065   058   006    Pre-fail  Always       -       217984869
  3 Spin_Up_Time            0x0003   098   096   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       32
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       3
  7 Seek_Error_Rate         0x000f   087   060   030    Pre-fail  Always       -       518881625
  9 Power_On_Hours          0x0032   091   091   000    Old_age   Always       -       8684
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   097   097   020    Old_age   Always       -       3799
194 Temperature_Celsius     0x0022   037   050   000    Old_age   Always       -       37
195 Hardware_ECC_Recovered  0x001a   065   057   000    Old_age   Always       -       217984869
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   Offline      -       0
202 TA_Increase_Count       0x0032   100   253   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      8682         -
# 2  Short offline       Completed without error       00%      8682         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

^ permalink raw reply	[flat|nested] 17+ messages in thread

end of thread, other threads:[~2006-12-10 11:27 UTC | newest]

Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2006-11-03 16:55 [Hardware] Какое состояние винтов по SMART_у Sharavin Sergey
2006-11-03 20:15 ` Michael Shigorin
2006-11-04  6:16   ` Sharavin Sergey
2006-11-04 16:38     ` Michael Shigorin
2006-11-04 23:48       ` Sharavin Sergey
2006-11-05 10:57         ` Michael Shigorin
2006-11-13 10:44       ` ABATAPA
2006-11-13 15:37         ` Michael Shigorin
2006-11-04 20:17   ` Vitaly Lipatov
2006-11-21 18:19   ` Grigory Batalov
2006-11-22 14:03     ` Sharavin Sergey
2006-11-22 14:35       ` Alexei V. Mezin
2006-11-22 16:45         ` Michael Shigorin
2006-11-22 15:52       ` Grigory Batalov
2006-11-23 11:52         ` Sharavin Sergey
2006-12-03 11:05         ` antilopa_gnu
2006-12-10 11:27         ` Vitaly Lipatov

ALT Linux hardware support

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \
		hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org
	public-inbox-index hardware

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://lore.altlinux.org/org.altlinux.lists.hardware


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git