From: Sharavin Sergey <sharavin@sibmail.ru> To: Hardware@lists.altlinux.org Subject: [Hardware] Какое состояние винтов по SMART_у Date: Fri, 3 Nov 2006 22:55:55 +0600 Message-ID: <200611032255.55623.sharavin@sibmail.ru> (raw) [-- Attachment #1: Type: text/plain, Size: 246 bytes --] Здравствуйте. Подскажите пожалуста какое состояние у винтов ? Не пора ли менять :) Тесты в аттаче для каждого винта. И на какой параметр надо обращать внимание, не на "RAW_VALUE" И его значение, больше хуже или наоборот ? С уважением. Сергей. [-- Attachment #2: 1.txt --] [-- Type: text/plain, Size: 6171 bytes --] # smartctl -a -d ata /dev/sda smartctl version 5.36 [i586-alt-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Western Digital Caviar SE (Serial ATA) family Device Model: WDC WD2000JD-00HBB0 Serial Number: WD-WMAL81563094 Firmware Version: 08.02D08 User Capacity: 200 049 647 616 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Fri Nov 3 22:48:43 2006 NOVT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (5785) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 75) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 200 147 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 129 126 021 Pre-fail Always - 6050 4 Start_Stop_Count 0x0032 099 099 040 Old_age Always - 1482 5 Reallocated_Sector_Ct 0x0033 199 199 140 Pre-fail Always - 1 7 Seek_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0 9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 4852 10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1481 194 Temperature_Celsius 0x0022 111 094 000 Old_age Always - 39 196 Reallocated_Event_Count 0x0032 199 199 000 Old_age Always - 1 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 1 198 Offline_Uncorrectable 0x0012 200 200 000 Old_age Always - 1 199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 31 200 Multi_Zone_Error_Rate 0x0009 200 199 051 Pre-fail Offline - 0 SMART Error Log Version: 1 ATA Error Count: 1 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1 occurred at disk power-on lifetime: 3974 hours (165 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 da 5a 3f e0 Error: UNC 8 sectors at LBA = 0x003f5ada = 4152026 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 da 5a 3f 14 00 00:01:01.550 READ DMA EXT 25 00 08 da 5a 3b 14 00 00:01:01.550 READ DMA EXT 25 00 08 da 5a 37 14 00 00:01:01.550 READ DMA EXT 25 00 08 da 5a 33 14 00 00:01:01.550 READ DMA EXT 25 00 08 da 5a 2f 14 00 00:01:01.550 READ DMA EXT SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 43 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. [-- Attachment #3: 2.txt --] [-- Type: text/plain, Size: 4745 bytes --] # smartctl -a /dev/hda smartctl version 5.36 [i586-alt-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus family Device Model: ST3120026A Serial Number: 3JT1LGXF Firmware Version: 3.06 User Capacity: 120 034 123 776 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2 Local Time is: Fri Nov 3 22:50:25 2006 NOVT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 065 058 006 Pre-fail Always - 217984869 3 Spin_Up_Time 0x0003 098 096 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 32 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 3 7 Seek_Error_Rate 0x000f 087 060 030 Pre-fail Always - 518881625 9 Power_On_Hours 0x0032 091 091 000 Old_age Always - 8684 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 097 097 020 Old_age Always - 3799 194 Temperature_Celsius 0x0022 037 050 000 Old_age Always - 37 195 Hardware_ECC_Recovered 0x001a 065 057 000 Old_age Always - 217984869 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 8682 - # 2 Short offline Completed without error 00% 8682 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
next reply other threads:[~2006-11-03 16:55 UTC|newest] Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top 2006-11-03 16:55 Sharavin Sergey [this message] 2006-11-03 20:15 ` Michael Shigorin 2006-11-04 6:16 ` Sharavin Sergey 2006-11-04 16:38 ` Michael Shigorin 2006-11-04 23:48 ` Sharavin Sergey 2006-11-05 10:57 ` Michael Shigorin 2006-11-13 10:44 ` ABATAPA 2006-11-13 15:37 ` Michael Shigorin 2006-11-04 20:17 ` Vitaly Lipatov 2006-11-21 18:19 ` Grigory Batalov 2006-11-22 14:03 ` Sharavin Sergey 2006-11-22 14:35 ` Alexei V. Mezin 2006-11-22 16:45 ` Michael Shigorin 2006-11-22 15:52 ` Grigory Batalov 2006-11-23 11:52 ` Sharavin Sergey 2006-12-03 11:05 ` antilopa_gnu 2006-12-10 11:27 ` Vitaly Lipatov
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=200611032255.55623.sharavin@sibmail.ru \ --to=sharavin@sibmail.ru \ --cc=Hardware@lists.altlinux.org \ --cc=hardware@altlinux.ru \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux hardware support This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \ hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org public-inbox-index hardware Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.hardware AGPL code for this site: git clone https://public-inbox.org/public-inbox.git