From: Michael Shigorin <mike@osdn.org.ua>
To: hardware@lists.altlinux.org
Subject: [Hardware] Fwd: Re: Fwd: Re: Fwd: [LINUX] Big storage (>2TB)
Date: Mon, 26 Jun 2006 16:09:22 +0300
Message-ID: <20060626130922.GP708@osdn.org.ua> (raw)
----- Forwarded message from Serge Ryabchun <sr/osdn.org.ua> -----
Date: Mon, 26 Jun 2006 16:08:11 +0300
From: Serge Ryabchun <sr/osdn.org.ua>
To: linux-list/linux.kiev.ua
Subject: Re: Fwd: Re: [Hardware] Fwd: [LINUX] Big storage (>2TB)
> > При загрузке драйвера SCSI контроллера получаю такую ругань:
> > ======================
> > sdb : very big device. try to use READ CAPACITY(16).
> > sdb : READ CAPACITY(16) failed.
> > sdb : status=1, message=00, host=0, driver=08
> > sdb : use 0xffffffff as device size
> > SCSI device sdb: 4294967296 512-byte hdwr sectors (2199023 MB)
> > ======================
> ---
> 3w-9xxx: scsi1: Found a 3ware 9000 Storage Controller at 0xda200000, IRQ: 18.
> 3w-9xxx: scsi1: Firmware FE9X 2.06.00.009, BIOS BE9X 2.03.01.051, Ports: 8.
> Vendor: AMCC Model: 9500S-8MI DISK Rev: 2.06
> Type: Direct-Access ANSI SCSI revision: 03
> ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 28 (level, low) -> IRQ 19
> ---
> ---
> sdc : very big device. try to use READ CAPACITY(16).
> SCSI device sdc: 8788875264 512-byte hdwr sectors (4499904 MB)
> SCSI device sdc: drive cache: write back, no read (daft)
> sdc: unknown partition table
> Attached scsi disk sdc at scsi4, channel 0, id 0, lun 0
> ---
Такая бага была и, видимо, есть и сейчас у aic7xxx. Решение было
только в использовании дров от производителей.
----- End forwarded message -----
--
---- WBR, Michael Shigorin <mike@altlinux.ru>
------ Linux.Kiev http://www.linux.kiev.ua/
reply other threads:[~2006-06-26 13:09 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060626130922.GP708@osdn.org.ua \
--to=mike@osdn.org.ua \
--cc=hardware@altlinux.ru \
--cc=hardware@lists.altlinux.org \
--cc=shigorin@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
ALT Linux hardware support
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \
hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org
public-inbox-index hardware
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.hardware
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git