* [Hardware] Intel 82845G\GL\GE\PE\GV Grephics Controller @ 2005-03-25 7:46 Антон Горлов 2005-03-25 8:36 ` Genix 0 siblings, 1 reply; 7+ messages in thread From: Антон Горлов @ 2005-03-25 7:46 UTC (permalink / raw) To: hardware Здравствуйте, hardware. Досталась на работе машинка на чипсете i845G со встроенным видео (Intel 82845G\GL\GE\PE\GV Grephics Controller). В консоли всё вроде бы нормально.. Нов иксах слишкрм маленькая частота. Xvidtune говорит что не знает такого. Дефолтные моделайны не кушает (заккоментировал все кроме 1024:768@85), но результат всё равно нулевой -ставит разрешение больше и сменьшей частотой. Как вылечить? ALM24 -- С уважением, Антон mailto:stalker_x86@mail.ru ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Hardware] Intel 82845G\GL\GE\PE\GV Grephics Controller 2005-03-25 7:46 [Hardware] Intel 82845G\GL\GE\PE\GV Grephics Controller Антон Горлов @ 2005-03-25 8:36 ` Genix 2005-03-25 8:44 ` Re[2]: " Антон Горлов 0 siblings, 1 reply; 7+ messages in thread From: Genix @ 2005-03-25 8:36 UTC (permalink / raw) To: hardware, Антон Горлов Антон Горлов wrote: > Досталась на работе машинка на чипсете i845G со встроенным видео > (Intel 82845G\GL\GE\PE\GV Grephics Controller). > В консоли всё вроде бы нормально.. Нов иксах слишкрм маленькая > частота. Xvidtune говорит что не знает такого. Дефолтные моделайны не > кушает (заккоментировал все кроме 1024:768@85), но результат всё равно > нулевой -ставит разрешение больше и сменьшей частотой. Как вылечить? > ALM24 У меня такая же проблема на соседней машине, и никак не могу понять в чем дело. Значит это не глюк конкретно-взятой машины. P.$.: и это при всем том, что на таком же чипсете (правда уже xorg + сизиф) работает 1024x768@100, но выше никак ;) -- У каждого в башке свои тараканы... ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re[2]: [Hardware] Intel 82845G\GL\GE\PE\GV Grephics Controller 2005-03-25 8:36 ` Genix @ 2005-03-25 8:44 ` Антон Горлов 2005-03-26 6:33 ` Re[3]: " Антон Горлов 0 siblings, 1 reply; 7+ messages in thread From: Антон Горлов @ 2005-03-25 8:44 UTC (permalink / raw) To: hardware Здравствуйте, Genix. Вы писали 25 марта 2005 г., 11:36:18: > Антон Горлов wrote: >> Досталась на работе машинка на чипсете i845G со встроенным видео >> (Intel 82845G\GL\GE\PE\GV Grephics Controller). >> В консоли всё вроде бы нормально.. Нов иксах слишкрм маленькая >> частота. Xvidtune говорит что не знает такого. Дефолтные моделайны не >> кушает (заккоментировал все кроме 1024:768@85), но результат всё равно >> нулевой -ставит разрешение больше и сменьшей частотой. Как вылечить? >> ALM24 > У меня такая же проблема на соседней машине, и никак не могу понять в > чем дело. Значит это не глюк конкретно-взятой машины. Получается что так. > P.$.: и это при всем том, что на таком же чипсете (правда уже xorg + > сизиф) работает 1024x768@100, но выше никак ;) А здесь почему-то ставит 1280 на сколько-то там и частоту 60 ГЦ. Работать не в консоли невозможно. -- С уважением, Антон mailto:stalker_x86@mail.ru ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re[3]: [Hardware] Intel 82845G\GL\GE\PE\GV Grephics Controller 2005-03-25 8:44 ` Re[2]: " Антон Горлов @ 2005-03-26 6:33 ` Антон Горлов 2005-03-26 8:37 ` [Hardware] Intel 82845G/GL/GE/PE/GV " Michael Shigorin 0 siblings, 1 reply; 7+ messages in thread From: Антон Горлов @ 2005-03-26 6:33 UTC (permalink / raw) To: hardware Здравствуйте, Антон. Вы писали 25 марта 2005 г., 11:44:57: Неужели ещё придётся и на рабочую машинку с мастером 2,4 ксорг ставить? Тогда вопрос --у меня дома камень атлон и пакеты получились *.athlon.rpm. А на работе камень интел --сюда эти пакеты встанут? Пересобирал как rpm -ba *.spec >>> Досталась на работе машинка на чипсете i845G со встроенным видео >>> (Intel 82845G\GL\GE\PE\GV Grephics Controller). >>> В консоли всё вроде бы нормально.. Нов иксах слишкрм маленькая >>> частота. Xvidtune говорит что не знает такого. Дефолтные моделайны не >>> кушает (заккоментировал все кроме 1024:768@85), но результат всё равно >>> нулевой -ставит разрешение больше и сменьшей частотой. Как вылечить? >>> ALM24 >> У меня такая же проблема на соседней машине, и никак не могу понять в >> чем дело. Значит это не глюк конкретно-взятой машины. > Получается что так. >> P.$.: и это при всем том, что на таком же чипсете (правда уже xorg + >> сизиф) работает 1024x768@100, но выше никак ;) > А здесь почему-то ставит 1280 на сколько-то там и частоту 60 ГЦ. > Работать не в консоли невозможно. -- С уважением, Антон mailto:stalker_x86@mail.ru ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Hardware] Intel 82845G/GL/GE/PE/GV Grephics Controller 2005-03-26 6:33 ` Re[3]: " Антон Горлов @ 2005-03-26 8:37 ` Michael Shigorin 2005-03-26 8:58 ` Re[2]: " Антон Горлов 0 siblings, 1 reply; 7+ messages in thread From: Michael Shigorin @ 2005-03-26 8:37 UTC (permalink / raw) To: hardware On Sat, Mar 26, 2005 at 09:33:22AM +0300, Антон Горлов wrote: > Неужели ещё придётся и на рабочую машинку с мастером 2,4 ксорг > ставить? Ну, э, у меня когда-то оно под 2.0/2.2 вполне себе работало. Точнее, под 2.0 были грабли с IDE на 845G (пришлось ядро на один патчлевел подновить, ну да было не сильно отъехавшее сизифовое под рукой), а под 2.2 сломали XF86 в апстриме -- но под рукой была одна из предыдущих сборок (чуточку более старой версии), которая работала без артефактов... > >>> Досталась на работе машинка на чипсете i845G со встроенным > >>> видео (Intel 82845G\GL\GE\PE\GV Grephics Controller). PS: написал, прочитал, вздохнул... Ау, rider, там хоть к тройке планируется _вменяемое_ публичное тестирование? На манер lioka'иных "полумесячных" сборок, вот только плюс то, обо что уже не одно поколение споткнулось -- фиксация release candidate и отсутствие изменений между RCn и релизом, кроме _максимум_ идентификации? Ну и пусть фактически финальный загрузочный диск будет доступен публично по факту раньше печати, зато есть шансы, что получится конфетка, а не как обычно по мелочам. -- ---- WBR, Michael Shigorin <mike@altlinux.ru> ------ Linux.Kiev http://www.linux.kiev.ua/ ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re[2]: [Hardware] Intel 82845G/GL/GE/PE/GV Grephics Controller 2005-03-26 8:37 ` [Hardware] Intel 82845G/GL/GE/PE/GV " Michael Shigorin @ 2005-03-26 8:58 ` Антон Горлов 2005-03-27 16:00 ` Michael Shigorin 0 siblings, 1 reply; 7+ messages in thread From: Антон Горлов @ 2005-03-26 8:58 UTC (permalink / raw) To: hardware Здравствуйте, Michael. Вы писали 26 марта 2005 г., 11:37:19: >> Неужели ещё придётся и на рабочую машинку с мастером 2,4 ксорг >> ставить? > Ну, э, у меня когда-то оно под 2.0/2.2 вполне себе работало. > Точнее, под 2.0 были грабли с IDE на 845G (пришлось ядро на один > патчлевел подновить, ну да было не сильно отъехавшее сизифовое > под рукой), а под 2.2 сломали XF86 в апстриме -- но под рукой > была одна из предыдущих сборок (чуточку более старой версии), > которая работала без артефактов... То есть всё же придётся ставить xorg? Тогда насчёт второй части вопроса --собранное в виде *.athlon.rpm встанет под интел? А то здесь времени на пересборку нет --работы много. Голая консоль не устраивает по некоторым причинам. >> >>> Досталась на работе машинка на чипсете i845G со встроенным >> >>> видео (Intel 82845G\GL\GE\PE\GV Grephics Controller). > PS: написал, прочитал, вздохнул... Ау, rider, там хоть к тройке > планируется _вменяемое_ публичное тестирование? На манер > lioka'иных "полумесячных" сборок, вот только плюс то, обо что уже > не одно поколение споткнулось -- фиксация release candidate и > отсутствие изменений между RCn и релизом, кроме _максимум_ > идентификации? > Ну и пусть фактически финальный загрузочный диск будет доступен > публично по факту раньше печати, зато есть шансы, что получится > конфетка, а не как обычно по мелочам. Мда. Хотелось бы что бы так оно и было. -- С уважением, Антон mailto:stalker_x86@mail.ru ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Hardware] Intel 82845G/GL/GE/PE/GV Grephics Controller 2005-03-26 8:58 ` Re[2]: " Антон Горлов @ 2005-03-27 16:00 ` Michael Shigorin 0 siblings, 0 replies; 7+ messages in thread From: Michael Shigorin @ 2005-03-27 16:00 UTC (permalink / raw) To: hardware On Sat, Mar 26, 2005 at 11:58:05AM +0300, Антон Горлов wrote: > >> Неужели ещё придётся и на рабочую машинку с мастером 2,4 > >> ксорг ставить? > > Ну, э, у меня когда-то оно под 2.0/2.2 вполне себе работало. > То есть всё же придётся ставить xorg? Я к тому, что даже не знаю, что посоветовать :-( Как-то сейчас под рукой i845 нет, хотя могут и появиться. > Тогда насчёт второй части вопроса --собранное в виде > *.athlon.rpm встанет под интел? Да, но не заработает. -- ---- WBR, Michael Shigorin <mike@altlinux.ru> ------ Linux.Kiev http://www.linux.kiev.ua/ ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2005-03-27 16:00 UTC | newest] Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2005-03-25 7:46 [Hardware] Intel 82845G\GL\GE\PE\GV Grephics Controller Антон Горлов 2005-03-25 8:36 ` Genix 2005-03-25 8:44 ` Re[2]: " Антон Горлов 2005-03-26 6:33 ` Re[3]: " Антон Горлов 2005-03-26 8:37 ` [Hardware] Intel 82845G/GL/GE/PE/GV " Michael Shigorin 2005-03-26 8:58 ` Re[2]: " Антон Горлов 2005-03-27 16:00 ` Michael Shigorin
ALT Linux hardware support This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \ hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org public-inbox-index hardware Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.hardware AGPL code for this site: git clone https://public-inbox.org/public-inbox.git