* [Hardware] Контроллер Promise и lilo @ 2005-01-12 16:43 Denis Smirnov 2005-01-12 21:47 ` Zilke Pavel 2005-01-12 22:59 ` Eugene Ostapets 0 siblings, 2 replies; 10+ messages in thread From: Denis Smirnov @ 2005-01-12 16:43 UTC (permalink / raw) To: hardware Имеется странный ноутбук с двумя (!) хардами и типа-RAID от Promise. RAID настроен как 2 stripe в каждом из которых один хард (владелцу этой машины RAID не нужен). После установки Master 2.4 lilo так и не взлетел. Вся моя борьба оказалась тщетной. При загрузке выводится L 99 99 99 99 и так три строчки. Да, диски видятся как hde/hdg, соответственно cd-rom на hda. P.S. Долго не верил в существование бука с 2-я хардами, пока своими глазами его не увидел. -- С уважением, Денис http://freesource.info ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Hardware] Контроллер Promise и lilo 2005-01-12 16:43 [Hardware] Контроллер Promise и lilo Denis Smirnov @ 2005-01-12 21:47 ` Zilke Pavel 2005-01-13 7:29 ` Michael Shigorin 2005-01-13 13:03 ` Denis Smirnov 2005-01-12 22:59 ` Eugene Ostapets 1 sibling, 2 replies; 10+ messages in thread From: Zilke Pavel @ 2005-01-12 21:47 UTC (permalink / raw) To: hardware Denis Smirnov пишет: >Имеется странный ноутбук с двумя (!) хардами и типа-RAID от Promise. >RAID настроен как 2 stripe в каждом из которых один хард (владелцу этой >машины RAID не нужен). > >После установки Master 2.4 lilo так и не взлетел. > >Вся моя борьба оказалась тщетной. При загрузке выводится L 99 99 99 99 и >так три строчки. > >Да, диски видятся как hde/hdg, соответственно cd-rom на hda. > >P.S. Долго не верил в существование бука с 2-я хардами, пока своими >глазами его не увидел. > > > Как это в страйпе может быть один хард? И какой контроллер? ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Hardware] Контроллер Promise и lilo 2005-01-12 21:47 ` Zilke Pavel @ 2005-01-13 7:29 ` Michael Shigorin 2005-01-13 13:03 ` Denis Smirnov 1 sibling, 0 replies; 10+ messages in thread From: Michael Shigorin @ 2005-01-13 7:29 UTC (permalink / raw) To: hardware On Thu, Jan 13, 2005 at 12:47:42AM +0300, Zilke Pavel wrote: > >RAID настроен как 2 stripe в каждом из которых один хард > >(владелцу этой машины RAID не нужен). > Как это в страйпе может быть один хард? И какой контроллер? Это некоторым контроллерам ~так JBOD объяснять приходится. -- ---- WBR, Michael Shigorin <mike@altlinux.ru> ------ Linux.Kiev http://www.linux.kiev.ua/ ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Hardware] Контроллер Promise и lilo 2005-01-12 21:47 ` Zilke Pavel 2005-01-13 7:29 ` Michael Shigorin @ 2005-01-13 13:03 ` Denis Smirnov 2005-01-15 5:44 ` Igor Solovyov 1 sibling, 1 reply; 10+ messages in thread From: Denis Smirnov @ 2005-01-13 13:03 UTC (permalink / raw) To: hardware On Thu, Jan 13, 2005 at 12:47:42AM +0300, Zilke Pavel wrote: ZP> Как это в страйпе может быть один хард? И какой контроллер? Promise. Он не знает что такое просто диск, он знает что такое страйп из одного диска :) -- С уважением, Денис http://freesource.info ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Hardware] Контроллер Promise и lilo 2005-01-13 13:03 ` Denis Smirnov @ 2005-01-15 5:44 ` Igor Solovyov 2005-01-16 12:19 ` Denis Smirnov 0 siblings, 1 reply; 10+ messages in thread From: Igor Solovyov @ 2005-01-15 5:44 UTC (permalink / raw) To: hardware On Thu, 13 Jan 2005 16:03:45 +0300 Denis Smirnov <mithraen@freesource.info> wrote: > ZP> Как это в страйпе может быть один хард? И какой контроллер? > > Promise. Он не знает что такое просто диск, он знает что такое страйп из > одного диска :) 1. У нас есть подобный ноут - Ровер. Но в нем просто есть возможность установить второй винт, а в нашем екземпляре не установлен. 2. Контроллер там то же Промис, но как видите он вполне может работать и с одним винтом. И, кстати, если в него поставить второй винт, то он его и увидет как просто второй винт. А если нужен RAID-массив, то: 3. У всех IDE-RAID контроллеров, которые мне приходилось видеть, имеется нечто подобное биосу. Если я установлю второй винт, то для того чтобы получить RAID-массив, я буду должен его создать именно в "биосе" контроллера, в противном случае это будут просто два отдельных диска, а никак не RAID. Т.е. для решения вашей проблемы, нужно попасть в "биос" контроллера и там удалить имеющийся RAID, после чего вы и получите два отдельных диска. Удачи. :-) -- Best regards! Igor Solovyov Zlatoust, Russia ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Hardware] Контроллер Promise и lilo 2005-01-15 5:44 ` Igor Solovyov @ 2005-01-16 12:19 ` Denis Smirnov 2005-01-16 14:08 ` Igor Solovyov 0 siblings, 1 reply; 10+ messages in thread From: Denis Smirnov @ 2005-01-16 12:19 UTC (permalink / raw) To: hardware On Sat, Jan 15, 2005 at 10:44:36AM +0500, Igor Solovyov wrote: >> Promise. Он не знает что такое просто диск, он знает что такое страйп из >> одного диска :) IS> 1. У нас есть подобный ноут - Ровер. Но в нем просто есть возможность IS> установить второй винт, а в нашем екземпляре не установлен. Ага, это именно роверовский ноут. IS> 2. Контроллер там то же Промис, но как видите он вполне может работать IS> и с одним винтом. И, кстати, если в него поставить второй винт, IS> то он его и увидет как просто второй винт. А если нужен RAID-массив, то: IS> 3. У всех IDE-RAID контроллеров, которые мне приходилось видеть, IS> имеется нечто подобное биосу. Если я установлю второй винт, то для IS> того чтобы получить RAID-массив, я буду должен его создать именно IS> в "биосе" контроллера, в противном случае это будут просто два отдельных IS> диска, а никак не RAID. Дык. Если приглядется, то он при удалении RAID как раз и создаёт 2 страйпа, каждый из одного диска :) Но это не важно, с этим-то проблем нет. Оба диска прекрасно видятся. Но загрузиться не удалось. Соответственно попробую реализовать совет с использованием grub. IS> Т.е. для решения вашей проблемы, нужно попасть в "биос" контроллера IS> и там удалить имеющийся RAID, после чего вы и получите два отдельных IS> диска. IS> Удачи. :-) Увы, мою проблему это не решает :) -- С уважением, Денис http://freesource.info ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Hardware] Контроллер Promise и lilo 2005-01-16 12:19 ` Denis Smirnov @ 2005-01-16 14:08 ` Igor Solovyov 2005-01-16 14:36 ` Denis Smirnov 0 siblings, 1 reply; 10+ messages in thread From: Igor Solovyov @ 2005-01-16 14:08 UTC (permalink / raw) To: hardware On Sun, 16 Jan 2005 15:19:20 +0300 Denis Smirnov <mithraen@freesource.info> wrote: > Дык. Если приглядется, то он при удалении RAID как раз и создаёт 2 > страйпа, каждый из одного диска :) О как! Это просто чудеса. :-)) А почему вы решили, что он "создаёт 2 страйпа", а не просто 2 отдельных диска? :-) > Но это не важно, с этим-то проблем нет. > Оба диска прекрасно видятся. Но загрузиться не удалось. > > Соответственно попробую реализовать совет с использованием grub. :-) Я бы все-таки предпочел разобраться в чем дело, нежели вслепую следовать советам. -- Best regards! Igor Solovyov Zlatoust, Russia ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Hardware] Контроллер Promise и lilo 2005-01-16 14:08 ` Igor Solovyov @ 2005-01-16 14:36 ` Denis Smirnov 0 siblings, 0 replies; 10+ messages in thread From: Denis Smirnov @ 2005-01-16 14:36 UTC (permalink / raw) To: hardware On Sun, Jan 16, 2005 at 07:08:25PM +0500, Igor Solovyov wrote: >> Дык. Если приглядется, то он при удалении RAID как раз и создаёт 2 >> страйпа, каждый из одного диска :) IS> О как! Это просто чудеса. :-)) IS> А почему вы решили, что он "создаёт 2 страйпа", IS> а не просто 2 отдельных диска? :-) Он их так и называет -- stripe. Он создаёт 2 stripe, каждый из которых состоит из одного диска. Такой вот у него кривой интерфейс :) Смысл-то тот же. >> Но это не важно, с этим-то проблем нет. >> Оба диска прекрасно видятся. Но загрузиться не удалось. >> Соответственно попробую реализовать совет с использованием grub. IS> :-) IS> Я бы все-таки предпочел разобраться в чем дело, нежели вслепую IS> следовать советам. На днях поеду туда где видел этот бук и поковыряю его ещё. -- С уважением, Денис http://freesource.info ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Hardware] Контроллер Promise и lilo 2005-01-12 16:43 [Hardware] Контроллер Promise и lilo Denis Smirnov 2005-01-12 21:47 ` Zilke Pavel @ 2005-01-12 22:59 ` Eugene Ostapets 2005-01-13 13:03 ` Denis Smirnov 1 sibling, 1 reply; 10+ messages in thread From: Eugene Ostapets @ 2005-01-12 22:59 UTC (permalink / raw) To: hardware -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Denis Smirnov wrote: | Имеется странный ноутбук с двумя (!) хардами и типа-RAID от Promise. | RAID настроен как 2 stripe в каждом из которых один хард (владелцу этой | машины RAID не нужен). | | После установки Master 2.4 lilo так и не взлетел. | | Вся моя борьба оказалась тщетной. При загрузке выводится L 99 99 99 99 и | так три строчки. | | Да, диски видятся как hde/hdg, соответственно cd-rom на hda. | Не знаю как с М2.4, но в более старых версия была проблема с разночтением имен дисков в ядре от инсталятора и стандартном, которое ставилось... Замые запущенные случаи приходилось обходить с помощью grub... После штатной загрузки можено вернуться к lilo - -- С уважением, Евгений Остапец -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.5 (GNU/Linux) iD8DBQFB5avIby6E0604xfQRAvrKAKCiB/qqKJtxPX2ZAk0iN/eICxm2PACbBQqG CY5ccs/rkdNFd2BdOzWhNss= =/jND -----END PGP SIGNATURE----- ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Hardware] Контроллер Promise и lilo 2005-01-12 22:59 ` Eugene Ostapets @ 2005-01-13 13:03 ` Denis Smirnov 0 siblings, 0 replies; 10+ messages in thread From: Denis Smirnov @ 2005-01-13 13:03 UTC (permalink / raw) To: hardware On Thu, Jan 13, 2005 at 12:59:22AM +0200, Eugene Ostapets wrote: EO> Не знаю как с М2.4, но в более старых версия была проблема с EO> разночтением имен дисков в EO> ядре от инсталятора и стандартном, которое ставилось... Замые запущенные EO> случаи EO> приходилось обходить с помощью grub... После штатной загрузки можено EO> вернуться к lilo О! Мысль. Можно попробовать. А подробнее -- какие различия? -- С уважением, Денис http://freesource.info ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2005-01-16 14:36 UTC | newest] Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2005-01-12 16:43 [Hardware] Контроллер Promise и lilo Denis Smirnov 2005-01-12 21:47 ` Zilke Pavel 2005-01-13 7:29 ` Michael Shigorin 2005-01-13 13:03 ` Denis Smirnov 2005-01-15 5:44 ` Igor Solovyov 2005-01-16 12:19 ` Denis Smirnov 2005-01-16 14:08 ` Igor Solovyov 2005-01-16 14:36 ` Denis Smirnov 2005-01-12 22:59 ` Eugene Ostapets 2005-01-13 13:03 ` Denis Smirnov
ALT Linux hardware support This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \ hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org public-inbox-index hardware Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.hardware AGPL code for this site: git clone https://public-inbox.org/public-inbox.git