From: Michael Shigorin <mike@osdn.org.ua> To: hardware@altlinux.ru Subject: [Hardware] Fwd: lspci*.out Date: Sat, 6 Nov 2004 14:51:53 +0200 Message-ID: <20041106125153.GO32307@osdn.org.ua> (raw) [-- Attachment #1: Type: text/plain, Size: 207 bytes --] Здравствуйте. Тут у misha@ не взвелось видео на Toshiba Sattelite SA-60 (ALM2.4 DVD edtn). Это лечится? :) -- ---- WBR, Michael Shigorin <mike@altlinux.ru> ------ Linux.Kiev http://www.linux.kiev.ua/ [-- Attachment #2: Type: message/rfc822, Size: 12394 bytes --] [-- Attachment #2.1.1: Type: text/plain, Size: 65 bytes --] subj -- Michael Bochkaryov www.linux.kiev.ua | www.osdn.org.ua [-- Attachment #2.1.2: lspci.out --] [-- Type: text/plain, Size: 8874 bytes --] 00:00.0 Host bridge: ATI Technologies Inc: Unknown device cab3 (rev 05) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 64 Region 0: Memory at b0000000 (32-bit, prefetchable) [size=64M] Region 1: Memory at b4000000 (32-bit, prefetchable) [size=4K] Capabilities: [a0] AGP version 2.0 Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none> 00:01.0 PCI bridge: ATI Technologies Inc PCI Bridge [IGP 340M] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000c000-0000dfff Memory behind bridge: e0000000-efffffff Prefetchable memory behind bridge: a0000000-afffffff BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- 00:13.0 USB Controller: ATI Technologies Inc: Unknown device 4347 (rev 01) (prog-if 10 [OHCI]) Subsystem: Toshiba America Info Systems: Unknown device ff10 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, cache line size 08 Interrupt: pin A routed to IRQ 19 Region 0: Memory at f0001000 (32-bit, non-prefetchable) [size=4K] 00:13.1 USB Controller: ATI Technologies Inc: Unknown device 4348 (rev 01) (prog-if 10 [OHCI]) Subsystem: Toshiba America Info Systems: Unknown device ff10 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, cache line size 08 Interrupt: pin A routed to IRQ 19 Region 0: Memory at f0002000 (32-bit, non-prefetchable) [size=4K] 00:13.2 USB Controller: ATI Technologies Inc: Unknown device 4345 (rev 01) (prog-if 20 [EHCI]) Subsystem: Toshiba America Info Systems: Unknown device ff10 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, cache line size 08 Interrupt: pin A routed to IRQ 19 Region 0: Memory at f0003000 (32-bit, non-prefetchable) [size=4K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ 00:14.0 SMBus: ATI Technologies Inc ATI SMBus (rev 18) Subsystem: Toshiba America Info Systems: Unknown device ff10 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Region 0: I/O ports at e000 [size=16] Region 1: Memory at f0000000 (32-bit, non-prefetchable) [size=1K] 00:14.1 IDE interface: ATI Technologies Inc: Unknown device 4349 (prog-if 8a [Master SecP PriP]) Subsystem: Toshiba America Info Systems: Unknown device ff10 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort+ <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at <unassigned> Region 1: I/O ports at <unassigned> Region 2: I/O ports at <unassigned> Region 3: I/O ports at <unassigned> Region 4: I/O ports at 8070 [size=16] 00:14.3 ISA bridge: ATI Technologies Inc: Unknown device 434c Subsystem: Toshiba America Info Systems: Unknown device ff10 Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:14.4 PCI bridge: ATI Technologies Inc: Unknown device 4342 (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 0000a000-0000bfff Memory behind bridge: d0000000-dfffffff Prefetchable memory behind bridge: 90000000-9fffffff BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- 00:14.5 Multimedia audio controller: ATI Technologies Inc IXP150 AC'97 Audio Controller Subsystem: Toshiba America Info Systems: Unknown device ff10 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (500ns min), cache line size 08 Interrupt: pin B routed to IRQ 17 Region 0: Memory at f0000400 (32-bit, non-prefetchable) [size=256] 00:14.6 Modem: ATI Technologies Inc: Unknown device 434d (rev 01) (prog-if 00 [Generic]) Subsystem: Toshiba America Info Systems: Unknown device 0001 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (500ns min), cache line size 08 Interrupt: pin B routed to IRQ 17 Region 0: Memory at f0000500 (32-bit, non-prefetchable) [size=256] 01:05.0 VGA compatible controller: ATI Technologies Inc: Unknown device 4437 (prog-if 00 [VGA]) Subsystem: Toshiba America Info Systems: Unknown device ff10 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2000ns min), cache line size 08 Interrupt: pin A routed to IRQ 16 Region 0: Memory at a0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at c000 [size=256] Region 2: Memory at e0000000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [58] AGP version 2.0 Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none> Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 02:06.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 02) Subsystem: Toshiba America Info Systems: Unknown device ff10 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Interrupt: pin A routed to IRQ 19 Region 0: Memory at 1c000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=02, secondary=03, subordinate=06, sec-latency=64 I/O window 0: 00000000-00000003 I/O window 1: 00000000-00000003 BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite- 16-bit legacy interface ports at 0001 02:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Toshiba America Info Systems: Unknown device ff10 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at a000 [size=256] Region 1: Memory at d0008000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 02:0a.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI]) Subsystem: Toshiba America Info Systems: Unknown device ff10 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (500ns min, 1000ns max), cache line size 08 Interrupt: pin A routed to IRQ 19 Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at d0004000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- [-- Attachment #2.1.3: lspcidrake.out --] [-- Type: text/plain, Size: 1302 bytes --] unknown : ATI|RS250/RS250M AGP Bridge [BRIDGE_HOST] (vendor:1002 device:cab3) unknown : ATI|PCI Bridge [IGP 340M] [BRIDGE_PCI] (vendor:1002 device:7010) usb-ohci : unknown (1002/4347/1179/ff10) [SERIAL_USB] usb-ohci : unknown (1002/4348/1179/ff10) [SERIAL_USB] usb-ohci : unknown (1002/4345/1179/ff10) [SERIAL_USB] unknown : ATI|ATI SMBus [SERIAL_SMBUS] (vendor:1002 device:4353 subv:1179 subd:ff10) unknown : unknown (1002/4349/1179/ff10) [STORAGE_IDE] unknown : unknown (1002/434c/1179/ff10) [BRIDGE_ISA] unknown : unknown (1002/4342/ffff/ffff) [BRIDGE_PCI] unknown : ATI|IXP150 AC'97 Audio Controller [MULTIMEDIA_AUDIO] (vendor:1002 device:4341 subv:1179 subd:ff10) unknown : unknown (1002/434d/1179/0001) [COMMUNICATION_MODEM] Card:ATI Radeon (fglrx): ATI|Radeon Mobility 7000 IGP 4437 [DISPLAY_VGA] (vendor:1002 device:4437 subv:1179 subd:ff10) yenta_socket : Texas Instruments|PCI1410 PC card Cardbus Controller [BRIDGE_CARDBUS] (vendor:104c device:ac50) 8139too : Realtek|RTL-8139 [NETWORK_ETHERNET] (vendor:10ec device:8139 subv:1179 subd:ff10) ohci1394 : Texas Instruments|TSB43AB21 IEEE-1394 Controller (PHY/Link) 1394a-2000 [SERIAL_FIREWIRE] (vendor:104c device:8026 subv:1179 subd:ff10)
next reply other threads:[~2004-11-06 12:51 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2004-11-06 12:51 Michael Shigorin [this message] 2004-11-06 15:45 ` Sergey Vlasov 2004-11-06 22:17 ` Michael Shigorin 2004-11-09 15:15 ` Denis Smirnov
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20041106125153.GO32307@osdn.org.ua \ --to=mike@osdn.org.ua \ --cc=hardware@altlinux.ru \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux hardware support This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \ hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org public-inbox-index hardware Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.hardware AGPL code for this site: git clone https://public-inbox.org/public-inbox.git