* [Hardware] 3Com 3c905-TX & Compact 2.3
@ 2004-04-03 8:28 Vladimir Bukhal
2004-04-03 8:53 ` Sergey Vlasov
` (3 more replies)
0 siblings, 4 replies; 9+ messages in thread
From: Vladimir Bukhal @ 2004-04-03 8:28 UTC (permalink / raw)
To: hardware
[-- Attachment #1: Type: text/plain, Size: 388 bytes --]
Добрый день.
Никак не могу запустить сеть под Compact 2.3.
Карточка 3Com 3c905-TX 100BaseTX [Boomerang] используется модуль
3c59x.
Самое поразительное, что во время установки удачно распечаталась
тестовая страница на удаленном Samba-принтере.
Под Win, FreeBSD и Knoppix на той же машине все в порядке.
Какие будут предложения по решению проблемы?
С уважением,
Владимир <vbux@artmed.ru>
[-- Attachment #2: messages.bz2 --]
[-- Type: application/octet-stream, Size: 13245 bytes --]
[-- Attachment #3: lspci_v.txt --]
[-- Type: text/plain, Size: 3184 bytes --]
00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 04)
Subsystem: ABIT Computer Corp.: Unknown device 0407
Flags: bus master, fast devsel, latency 0
Memory at d0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [88] #09 [e104]
Capabilities: [a0] AGP version 2.0
00:01.0 PCI bridge: Intel Corp. 82815 815 Chipset AGP Bridge (rev 04) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, fast devsel, latency 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: d8000000-d9ffffff
Prefetchable memory behind bridge: d4000000-d7ffffff
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev 11) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 00009000-0000afff
Memory behind bridge: da000000-daffffff
00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 11)
Flags: bus master, medium devsel, latency 0
00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 11) (prog-if 80 [Master])
Subsystem: ABIT Computer Corp.: Unknown device 0407
Flags: bus master, medium devsel, latency 0
I/O ports at f000 [size=16]
00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 11) (prog-if 00 [UHCI])
Subsystem: ABIT Computer Corp.: Unknown device 0407
Flags: bus master, medium devsel, latency 0, IRQ 5
I/O ports at b000 [size=32]
00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 11)
Subsystem: ABIT Computer Corp.: Unknown device 0407
Flags: medium devsel, IRQ 11
I/O ports at 5000 [size=16]
00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 11) (prog-if 00 [UHCI])
Subsystem: ABIT Computer Corp.: Unknown device 0407
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at b400 [size=32]
00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97 Audio (rev 11)
Subsystem: ABIT Computer Corp.: Unknown device 0407
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at b800 [size=256]
I/O ports at bc00 [size=64]
01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev a2) (prog-if 00 [VGA])
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 9
Memory at d8000000 (32-bit, non-prefetchable) [size=16M]
Memory at d4000000 (32-bit, prefetchable) [size=64M]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 3.0
02:03.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang]
Flags: bus master, medium devsel, latency 32, IRQ 5
I/O ports at 9000 [size=64]
Expansion ROM at <unassigned> [disabled] [size=64K]
02:06.0 Unknown mass storage controller: Triones Technologies, Inc. HPT366/368/370/370A/372 (rev 04)
Subsystem: Triones Technologies, Inc. HPT370A
Flags: bus master, 66Mhz, medium devsel, latency 120, IRQ 11
I/O ports at 9400 [size=8]
I/O ports at 9800 [size=4]
I/O ports at 9c00 [size=8]
I/O ports at a000 [size=4]
I/O ports at a400 [size=256]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [60] Power Management version 2
[-- Attachment #4: lsmod.txt --]
[-- Type: text/plain, Size: 995 bytes --]
Module Size Used by Not tainted
parport_pc 25640 1 (autoclean)
lp 6496 0 (autoclean)
parport 23072 1 (autoclean) [parport_pc lp]
autofs4 8244 1 (autoclean)
i810_audio 22632 0
ac97_codec 11880 0 [i810_audio]
soundcore 3684 2 [i810_audio]
3c59x 26000 1 (autoclean)
floppy 48600 0 (autoclean)
usb-uhci 21708 0 (unused)
usbcore 58464 1 [usb-uhci]
nls_cp1251 3580 2 (autoclean)
nls_cp866 3836 2 (autoclean)
vfat 9516 2 (autoclean)
fat 30744 0 (autoclean) [vfat]
agpgart 43172 0 (unused)
ide-scsi 9296 0
scsi_mod 95680 1 [ide-scsi]
rtc 6204 0 (autoclean)
ext3 62192 3
jbd 37820 3 [ext3]
[-- Attachment #5: ifconig.txt --]
[-- Type: text/plain, Size: 456 bytes --]
eth0 Link encap:Ethernet HWaddr 00:60:97:BB:08:54
inet addr:192.168.0.11 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:12 dropped:0 overruns:13 carrier:13
collisions:0 txqueuelen:100
RX bytes:1258 (1.2 Kb) TX bytes:0 (0.0 b)
Interrupt:5 Base address:0x9000
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Hardware] 3Com 3c905-TX & Compact 2.3
2004-04-03 8:28 [Hardware] 3Com 3c905-TX & Compact 2.3 Vladimir Bukhal
@ 2004-04-03 8:53 ` Sergey Vlasov
2004-04-03 10:40 ` Vladimir Bukhal
` (2 subsequent siblings)
3 siblings, 0 replies; 9+ messages in thread
From: Sergey Vlasov @ 2004-04-03 8:53 UTC (permalink / raw)
To: hardware
[-- Attachment #1: Type: text/plain, Size: 782 bytes --]
On Sat, Apr 03, 2004 at 12:28:23PM +0400, Vladimir Bukhal wrote:
> Никак не могу запустить сеть под Compact 2.3.
> Карточка 3Com 3c905-TX 100BaseTX [Boomerang] используется модуль
> 3c59x.
> Самое поразительное, что во время установки удачно распечаталась
> тестовая страница на удаленном Samba-принтере.
> Под Win, FreeBSD и Knoppix на той же машине все в порядке.
> Какие будут предложения по решению проблемы?
Это весьма похоже на
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=98767
Там проблема устранялась отключением kudzu (chkconfig kudzu off).
kudzu, кроме всего прочего, загружает и снова выгружает модули -
возможно, 3c59x этого не переносит. Хотя настоящая причина так и не
выявлена...
Кроме того, можно проверить загрузку с опцией acpi=off.
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Hardware] 3Com 3c905-TX & Compact 2.3
2004-04-03 8:28 [Hardware] 3Com 3c905-TX & Compact 2.3 Vladimir Bukhal
2004-04-03 8:53 ` Sergey Vlasov
@ 2004-04-03 10:40 ` Vladimir Bukhal
2004-04-03 11:32 ` Denis Ovsienko
2004-04-03 17:52 ` [Hardware] " Konstantin A. Lepikhov
3 siblings, 0 replies; 9+ messages in thread
From: Vladimir Bukhal @ 2004-04-03 10:40 UTC (permalink / raw)
To: hardware
Добрый день.
Нащел похожую проблему в bugzill'е:
http://bugzilla.altlinux.ru/show_bug.cgi?id=3727
Куда копать сообразил.
С уважением,
Владимир <vbux@artmed.ru>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Hardware] 3Com 3c905-TX & Compact 2.3
2004-04-03 8:28 [Hardware] 3Com 3c905-TX & Compact 2.3 Vladimir Bukhal
2004-04-03 8:53 ` Sergey Vlasov
2004-04-03 10:40 ` Vladimir Bukhal
@ 2004-04-03 11:32 ` Denis Ovsienko
2004-04-03 14:14 ` Re[2]: " Vladimir Bukhal
2004-04-03 17:52 ` [Hardware] " Konstantin A. Lepikhov
3 siblings, 1 reply; 9+ messages in thread
From: Denis Ovsienko @ 2004-04-03 11:32 UTC (permalink / raw)
To: hardware
> Карточка 3Com 3c905-TX 100BaseTX [Boomerang] используется модуль
> 3c59x.
Я обычно использую модуль 3c90x (kernel-modules-3c90x-std-up, кажется).
--
DO4-UANIC
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re[2]: [Hardware] 3Com 3c905-TX & Compact 2.3
2004-04-03 11:32 ` Denis Ovsienko
@ 2004-04-03 14:14 ` Vladimir Bukhal
2004-04-03 15:27 ` Sergey Vlasov
2004-04-03 18:36 ` Re[2]: " Denis Ovsienko
0 siblings, 2 replies; 9+ messages in thread
From: Vladimir Bukhal @ 2004-04-03 14:14 UTC (permalink / raw)
To: Denis Ovsienko
Добрый день.
>> Карточка 3Com 3c905-TX 100BaseTX [Boomerang] используется модуль
>> 3c59x.
DO> Я обычно использую модуль 3c90x (kernel-modules-3c90x-std-up, кажется).
AFAIK это модуль для карт помоложе.
С уважением,
Владимир <vbux@artmed.ru>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Hardware] 3Com 3c905-TX & Compact 2.3
2004-04-03 14:14 ` Re[2]: " Vladimir Bukhal
@ 2004-04-03 15:27 ` Sergey Vlasov
2004-04-04 8:25 ` Anton Farygin
2004-04-03 18:36 ` Re[2]: " Denis Ovsienko
1 sibling, 1 reply; 9+ messages in thread
From: Sergey Vlasov @ 2004-04-03 15:27 UTC (permalink / raw)
To: Denis Ovsienko
[-- Attachment #1: Type: text/plain, Size: 414 bytes --]
On Sat, Apr 03, 2004 at 06:14:38PM +0400, Vladimir Bukhal wrote:
> Добрый день.
> >> Карточка 3Com 3c905-TX 100BaseTX [Boomerang] используется модуль
> >> 3c59x.
> DO> Я обычно использую модуль 3c90x (kernel-modules-3c90x-std-up, кажется).
> AFAIK это модуль для карт помоложе.
Как раз наоборот - 3c90x не поддерживает старые карты. В частности,
он не работает с первыми 3C905 - только 3C905B и 3C905C.
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Hardware] 3Com 3c905-TX & Compact 2.3
2004-04-03 15:27 ` Sergey Vlasov
@ 2004-04-04 8:25 ` Anton Farygin
0 siblings, 0 replies; 9+ messages in thread
From: Anton Farygin @ 2004-04-04 8:25 UTC (permalink / raw)
To: Denis Ovsienko
On Sat, Apr 03, 2004 at 07:27:38PM +0400, Sergey Vlasov wrote:
> On Sat, Apr 03, 2004 at 06:14:38PM +0400, Vladimir Bukhal wrote:
> > Добрый день.
> > >> Карточка 3Com 3c905-TX 100BaseTX [Boomerang] используется модуль
> > >> 3c59x.
> > DO> Я обычно использую модуль 3c90x (kernel-modules-3c90x-std-up, кажется).
> > AFAIK это модуль для карт помоложе.
>
> Как раз наоборот - 3c90x не поддерживает старые карты. В частности,
> он не работает с первыми 3C905 - только 3C905B и 3C905C.
Господа, если у вас какой-то модуль заработал вместо дефолтного нерабочего
- вешайте баги на пакет ldetect-lst. В сообщение об ошибке нужно писать
lspcidrake -v для этого устройства и имя работающего драйвера.
Будем исправлять базу.
Rgds,
Rider
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re[2]: [Hardware] 3Com 3c905-TX & Compact 2.3
2004-04-03 14:14 ` Re[2]: " Vladimir Bukhal
2004-04-03 15:27 ` Sergey Vlasov
@ 2004-04-03 18:36 ` Denis Ovsienko
1 sibling, 0 replies; 9+ messages in thread
From: Denis Ovsienko @ 2004-04-03 18:36 UTC (permalink / raw)
To: hardware
> DO> Я обычно использую модуль 3c90x (kernel-modules-3c90x-std-up, кажется).
> AFAIK это модуль для карт помоложе.
Для какой спрашивали, для такой я и ответил.
--
DO4-UANIC
^ permalink raw reply [flat|nested] 9+ messages in thread
* [Hardware] Re: 3Com 3c905-TX & Compact 2.3
2004-04-03 8:28 [Hardware] 3Com 3c905-TX & Compact 2.3 Vladimir Bukhal
` (2 preceding siblings ...)
2004-04-03 11:32 ` Denis Ovsienko
@ 2004-04-03 17:52 ` Konstantin A. Lepikhov
3 siblings, 0 replies; 9+ messages in thread
From: Konstantin A. Lepikhov @ 2004-04-03 17:52 UTC (permalink / raw)
To: hardware
Hi Vladimir!
Saturday 03, at 12:28:23 PM you wrote:
> Добрый день.
> Никак не могу запустить сеть под Compact 2.3.
> Карточка 3Com 3c905-TX 100BaseTX [Boomerang] используется модуль
> 3c59x.
Можно еще с apic/acpi поиграться, мне иногда помогает их отключать (в
зависимости от проблемы).
--
WBR, Konstantin chat with ==>ICQ: 109916175
Lepikhov, speak to ==>JID: lakostis@jabber.org
aka L.A. Kostis write to ==>mailto:lakostis@pisem.net.nospam
...The information is like the bank... (c) EC8OR
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2004-04-04 8:25 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-04-03 8:28 [Hardware] 3Com 3c905-TX & Compact 2.3 Vladimir Bukhal
2004-04-03 8:53 ` Sergey Vlasov
2004-04-03 10:40 ` Vladimir Bukhal
2004-04-03 11:32 ` Denis Ovsienko
2004-04-03 14:14 ` Re[2]: " Vladimir Bukhal
2004-04-03 15:27 ` Sergey Vlasov
2004-04-04 8:25 ` Anton Farygin
2004-04-03 18:36 ` Re[2]: " Denis Ovsienko
2004-04-03 17:52 ` [Hardware] " Konstantin A. Lepikhov
ALT Linux hardware support
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/hardware/0 hardware/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 hardware hardware/ http://lore.altlinux.org/hardware \
hardware@altlinux.ru hardware@lists.altlinux.org hardware@lists.altlinux.ru hardware@lists.altlinux.com hardware@altlinux.org
public-inbox-index hardware
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.hardware
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git