From: "Антон Мидюков" <midyukov-anton@ya.ru> To: devel@lists.altlinux.org Subject: Re: [devel] [#216568] FAILED non-identical noarch packages Date: Tue, 27 Nov 2018 11:33:58 +0700 Message-ID: <ff135deb-4ca1-0ad7-4010-9534a33db6f4@ya.ru> (raw) In-Reply-To: <871e4e89-21bd-dccf-433b-a51d20b3f352@ya.ru> 24.11.2018 18:49, Антон Мидюков пишет: > Здравствуйте. > > Почему пакеты получаются не идентичными? В них одни и те же файлы - 3d > модели. > > Неужели потому, что i586 был собран со второй попытки. Первый раз для > i586 kicad-packages3D случился: > > hasher-priv: master: idle time limit (3600 seconds) exceeded > > Как с этим быть? > Подскажите что-нибудь. > 24.11.2018 18:01, Girar Builder awaiter robot пишет: >> http://git.altlinux.org/tasks/216568/logs/events.4.1.log >> >> 2018-Nov-24 08:46:50 :: test-only task #216568 for sisyphus resumed >> by antohami: >> #100 build 5.0.1-alt1 from /people/antohami/packages/kicad-doc.git >> fetched at 2018-Nov-18 14:00:13 >> #200 build 5.0.1-alt1 from /people/antohami/packages/kicad-i18n.git >> fetched at 2018-Nov-18 14:02:03 >> #300 build 5.0.1-alt1 from >> /people/antohami/packages/kicad-symbols.git fetched at 2018-Nov-18 >> 15:05:11 >> #400 build 5.0.1-alt1 from >> /people/antohami/packages/kicad-footprints.git fetched at 2018-Nov-18 >> 15:07:30 >> #500 build 5.0.1-alt1 from >> /people/antohami/packages/kicad-templates.git fetched at 2018-Nov-18 >> 15:10:09 >> #600 build 5.0.1-alt1 from >> /people/antohami/packages/kicad-packages3D.git fetched at 2018-Nov-22 >> 07:07:04 >> #700 removed >> #1000 removed >> #1100 build 5.0.1-alt1 from /people/antohami/packages/kicad.git >> fetched at 2018-Nov-23 09:09:05 >> 2018-Nov-24 08:50:45 :: created build repo >> 2018-Nov-24 08:50:47 :: [aarch64] #100 kicad-doc.git 5.0.1-alt1: >> build start >> 2018-Nov-24 08:50:47 :: [x86_64] #100 kicad-doc.git 5.0.1-alt1: build >> start >> 2018-Nov-24 08:50:47 :: [i586] #100 kicad-doc.git 5.0.1-alt1: build >> start >> 2018-Nov-24 08:51:34 :: [i586] kicad-doc.git 5.0.1-alt1: remote: no >> need to rebuild >> 2018-Nov-24 08:51:34 :: [x86_64] kicad-doc.git 5.0.1-alt1: remote: no >> need to rebuild >> 2018-Nov-24 08:51:34 :: [i586] #100 kicad-doc.git 5.0.1-alt1: build OK >> 2018-Nov-24 08:51:34 :: [i586] #200 kicad-i18n.git 5.0.1-alt1: build >> start >> 2018-Nov-24 08:51:34 :: [x86_64] #100 kicad-doc.git 5.0.1-alt1: build OK >> 2018-Nov-24 08:51:34 :: [x86_64] #200 kicad-i18n.git 5.0.1-alt1: >> build start >> 2018-Nov-24 08:51:55 :: [i586] kicad-i18n.git 5.0.1-alt1: remote: no >> need to rebuild >> 2018-Nov-24 08:51:55 :: [i586] #200 kicad-i18n.git 5.0.1-alt1: build OK >> 2018-Nov-24 08:51:55 :: [i586] #300 kicad-symbols.git 5.0.1-alt1: >> build start >> 2018-Nov-24 08:51:55 :: [x86_64] kicad-i18n.git 5.0.1-alt1: remote: >> no need to rebuild >> 2018-Nov-24 08:51:55 :: [x86_64] #200 kicad-i18n.git 5.0.1-alt1: >> build OK >> 2018-Nov-24 08:51:55 :: [x86_64] #300 kicad-symbols.git 5.0.1-alt1: >> build start >> 2018-Nov-24 08:52:15 :: [i586] kicad-symbols.git 5.0.1-alt1: remote: >> no need to rebuild >> 2018-Nov-24 08:52:15 :: [i586] #300 kicad-symbols.git 5.0.1-alt1: >> build OK >> 2018-Nov-24 08:52:15 :: [i586] #400 kicad-footprints.git 5.0.1-alt1: >> build start >> 2018-Nov-24 08:52:15 :: [x86_64] kicad-symbols.git 5.0.1-alt1: >> remote: no need to rebuild >> 2018-Nov-24 08:52:15 :: [x86_64] #300 kicad-symbols.git 5.0.1-alt1: >> build OK >> 2018-Nov-24 08:52:15 :: [x86_64] #400 kicad-footprints.git >> 5.0.1-alt1: build start >> 2018-Nov-24 08:52:19 :: [aarch64] kicad-doc.git 5.0.1-alt1: remote: >> no need to rebuild >> 2018-Nov-24 08:52:19 :: [aarch64] #100 kicad-doc.git 5.0.1-alt1: >> build OK >> 2018-Nov-24 08:52:19 :: [aarch64] #200 kicad-i18n.git 5.0.1-alt1: >> build start >> 2018-Nov-24 08:52:35 :: [i586] kicad-footprints.git 5.0.1-alt1: >> remote: no need to rebuild >> 2018-Nov-24 08:52:35 :: [i586] #400 kicad-footprints.git 5.0.1-alt1: >> build OK >> 2018-Nov-24 08:52:35 :: [i586] #500 kicad-templates.git 5.0.1-alt1: >> build start >> 2018-Nov-24 08:52:36 :: [x86_64] kicad-footprints.git 5.0.1-alt1: >> remote: no need to rebuild >> 2018-Nov-24 08:52:37 :: [x86_64] #400 kicad-footprints.git >> 5.0.1-alt1: build OK >> 2018-Nov-24 08:52:37 :: [x86_64] #500 kicad-templates.git 5.0.1-alt1: >> build start >> 2018-Nov-24 08:52:56 :: [i586] kicad-templates.git 5.0.1-alt1: >> remote: no need to rebuild >> 2018-Nov-24 08:52:56 :: [i586] #500 kicad-templates.git 5.0.1-alt1: >> build OK >> 2018-Nov-24 08:52:56 :: [i586] #600 kicad-packages3D.git 5.0.1-alt1: >> build start >> 2018-Nov-24 08:52:59 :: [x86_64] kicad-templates.git 5.0.1-alt1: >> remote: no need to rebuild >> 2018-Nov-24 08:52:59 :: [x86_64] #500 kicad-templates.git 5.0.1-alt1: >> build OK >> 2018-Nov-24 08:52:59 :: [x86_64] #600 kicad-packages3D.git >> 5.0.1-alt1: build start >> 2018-Nov-24 08:53:13 :: [aarch64] kicad-i18n.git 5.0.1-alt1: remote: >> no need to rebuild >> 2018-Nov-24 08:53:13 :: [aarch64] #200 kicad-i18n.git 5.0.1-alt1: >> build OK >> 2018-Nov-24 08:53:13 :: [aarch64] #300 kicad-symbols.git 5.0.1-alt1: >> build start >> 2018-Nov-24 08:54:08 :: [aarch64] kicad-symbols.git 5.0.1-alt1: >> remote: no need to rebuild >> 2018-Nov-24 08:54:08 :: [aarch64] #300 kicad-symbols.git 5.0.1-alt1: >> build OK >> 2018-Nov-24 08:54:08 :: [aarch64] #400 kicad-footprints.git >> 5.0.1-alt1: build start >> 2018-Nov-24 08:54:21 :: [x86_64] kicad-packages3D.git 5.0.1-alt1: >> remote: no need to rebuild >> 2018-Nov-24 08:54:21 :: [x86_64] #600 kicad-packages3D.git >> 5.0.1-alt1: build OK >> 2018-Nov-24 08:54:21 :: [x86_64] #1100 kicad.git 5.0.1-alt1: build start >> 2018-Nov-24 08:55:01 :: [aarch64] kicad-footprints.git 5.0.1-alt1: >> remote: no need to rebuild >> 2018-Nov-24 08:55:01 :: [aarch64] #400 kicad-footprints.git >> 5.0.1-alt1: build OK >> 2018-Nov-24 08:55:01 :: [aarch64] #500 kicad-templates.git >> 5.0.1-alt1: build start >> 2018-Nov-24 08:55:56 :: [aarch64] kicad-templates.git 5.0.1-alt1: >> remote: no need to rebuild >> 2018-Nov-24 08:55:56 :: [aarch64] #500 kicad-templates.git >> 5.0.1-alt1: build OK >> 2018-Nov-24 08:55:56 :: [aarch64] #600 kicad-packages3D.git >> 5.0.1-alt1: build start >> 2018-Nov-24 08:57:35 :: [aarch64] kicad-packages3D.git 5.0.1-alt1: >> remote: no need to rebuild >> 2018-Nov-24 08:57:35 :: [aarch64] #600 kicad-packages3D.git >> 5.0.1-alt1: build OK >> 2018-Nov-24 08:57:35 :: [aarch64] #1100 kicad.git 5.0.1-alt1: build >> start >> 2018-Nov-24 09:33:07 :: [x86_64] #1100 kicad.git 5.0.1-alt1: build OK >> 2018-Nov-24 10:10:03 :: [i586] #600 kicad-packages3D.git 5.0.1-alt1: >> build OK >> 2018-Nov-24 10:10:03 :: [i586] #1100 kicad.git 5.0.1-alt1: build start >> 2018-Nov-24 10:20:04 :: [aarch64] #1100 kicad.git 5.0.1-alt1: build OK >> 2018-Nov-24 10:47:40 :: [i586] #1100 kicad.git 5.0.1-alt1: build OK >> 2018-Nov-24 10:50:25 :: build check OK >> --- kicad-packages3D-5.0.1-alt1.noarch.rpm.x86_64 2018-11-24 >> 10:51:57.225545652 +0000 >> +++ kicad-packages3D-5.0.1-alt1.noarch.rpm.i586 2018-11-24 >> 10:51:57.234545713 +0000 >> @@ -1,3 +1,3 @@ >> -Requires: .sisyphus.216568.600.3.1-kicad-packages3D-part1-5.0.1-alt1 >> -Requires: .sisyphus.216568.600.3.1-kicad-packages3D-part2-5.0.1-alt1 >> +Requires: .sisyphus.216568.600.4.1-kicad-packages3D-part1-5.0.1-alt1 >> +Requires: .sisyphus.216568.600.4.1-kicad-packages3D-part2-5.0.1-alt1 >> Requires: rpmlib(PayloadIsLzma) >> error (#600): non-identical noarch packages >> --- kicad-packages3D-part1-5.0.1-alt1.noarch.rpm.x86_64 2018-11-24 >> 10:52:40.959840009 +0000 >> +++ kicad-packages3D-part1-5.0.1-alt1.noarch.rpm.i586 2018-11-24 >> 10:53:24.910135819 +0000 >> @@ -6768,3 +6768,3 @@ >> Requires: rpmlib(PayloadIsLzma) >> -Provides: .sisyphus.216568.600.3.1-kicad-packages3D-part1-5.0.1-alt1 >> +Provides: .sisyphus.216568.600.4.1-kicad-packages3D-part1-5.0.1-alt1 >> Provides: kicad-packages3D-part1 = 5.0.1-alt1 >> error (#600): non-identical noarch packages >> --- kicad-packages3D-part2-5.0.1-alt1.noarch.rpm.x86_64 2018-11-24 >> 10:53:34.386199597 +0000 >> +++ kicad-packages3D-part2-5.0.1-alt1.noarch.rpm.i586 2018-11-24 >> 10:53:43.435260502 +0000 >> @@ -2832,3 +2832,3 @@ >> Requires: rpmlib(PayloadIsLzma) >> -Provides: .sisyphus.216568.600.3.1-kicad-packages3D-part2-5.0.1-alt1 >> +Provides: .sisyphus.216568.600.4.1-kicad-packages3D-part2-5.0.1-alt1 >> Provides: kicad-packages3D-part2 = 5.0.1-alt1 >> error (#600): non-identical noarch packages >> --- kicad-packages3D-5.0.1-alt1.noarch.rpm.i586 2018-11-24 >> 10:55:29.307973086 +0000 >> +++ kicad-packages3D-5.0.1-alt1.noarch.rpm.aarch64 2018-11-24 >> 10:55:29.315973139 +0000 >> @@ -1,3 +1,3 @@ >> -Requires: .sisyphus.216568.600.4.1-kicad-packages3D-part1-5.0.1-alt1 >> -Requires: .sisyphus.216568.600.4.1-kicad-packages3D-part2-5.0.1-alt1 >> +Requires: .sisyphus.216568.600.3.1-kicad-packages3D-part1-5.0.1-alt1 >> +Requires: .sisyphus.216568.600.3.1-kicad-packages3D-part2-5.0.1-alt1 >> Requires: rpmlib(PayloadIsLzma) >> error (#600): non-identical noarch packages >> --- kicad-packages3D-part1-5.0.1-alt1.noarch.rpm.i586 2018-11-24 >> 10:56:12.430263322 +0000 >> +++ kicad-packages3D-part1-5.0.1-alt1.noarch.rpm.aarch64 2018-11-24 >> 10:56:55.606553923 +0000 >> @@ -6768,3 +6768,3 @@ >> Requires: rpmlib(PayloadIsLzma) >> -Provides: .sisyphus.216568.600.4.1-kicad-packages3D-part1-5.0.1-alt1 >> +Provides: .sisyphus.216568.600.3.1-kicad-packages3D-part1-5.0.1-alt1 >> Provides: kicad-packages3D-part1 = 5.0.1-alt1 >> error (#600): non-identical noarch packages >> --- kicad-packages3D-part2-5.0.1-alt1.noarch.rpm.i586 2018-11-24 >> 10:57:04.585614356 +0000 >> +++ kicad-packages3D-part2-5.0.1-alt1.noarch.rpm.aarch64 2018-11-24 >> 10:57:13.682675585 +0000 >> @@ -2832,3 +2832,3 @@ >> Requires: rpmlib(PayloadIsLzma) >> -Provides: .sisyphus.216568.600.4.1-kicad-packages3D-part2-5.0.1-alt1 >> +Provides: .sisyphus.216568.600.3.1-kicad-packages3D-part2-5.0.1-alt1 >> Provides: kicad-packages3D-part2 = 5.0.1-alt1 >> error (#600): non-identical noarch packages >> 2018-Nov-24 11:01:05 :: noarch check FAILED >> 2018-Nov-24 11:01:05 :: task #216568 for sisyphus FAILED > -- С уважением, Антон Мидюков <antohami@altlinux.org>
next prev parent reply other threads:[~2018-11-27 4:33 UTC|newest] Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-11-24 11:49 ` Антон Мидюков 2018-11-27 4:33 ` Антон Мидюков [this message] 2018-11-27 6:01 ` Ivan A. Melnikov 2018-11-27 13:11 ` Антон Мидюков 2018-11-27 14:26 ` Vladimir D. Seleznev 2018-11-28 3:47 ` Alexey V. Vissarionov 2018-12-03 17:52 ` Vladimir D. Seleznev
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=ff135deb-4ca1-0ad7-4010-9534a33db6f4@ya.ru \ --to=midyukov-anton@ya.ru \ --cc=devel@lists.altlinux.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux Team development discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/devel/0 devel/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 devel devel/ http://lore.altlinux.org/devel \ devel@altlinux.org devel@altlinux.ru devel@lists.altlinux.org devel@lists.altlinux.ru devel@linux.iplabs.ru mandrake-russian@linuxteam.iplabs.ru sisyphus@linuxteam.iplabs.ru public-inbox-index devel Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.devel AGPL code for this site: git clone https://public-inbox.org/public-inbox.git