* [devel] I: g++ -Werror=return-type by default @ 2019-02-11 0:39 ` Dmitry V. Levin 2019-02-11 10:23 ` Dmitry V. Levin 0 siblings, 1 reply; 15+ messages in thread From: Dmitry V. Levin @ 2019-02-11 0:39 UTC (permalink / raw) To: ALT Devel discussion list [-- Attachment #1: Type: text/plain, Size: 1660 bytes --] On Sat, Feb 09, 2019 at 09:24:33AM +0000, Girar Builder pender robot wrote: > http://git.altlinux.org/tasks/archive/done/_215/221014/logs/events.1.3.log > > 2019-Feb-09 08:18:45 :: task #221014 for sisyphus started by ldv: > #100 build 8.2.1-alt4 from /people/ldv/packages/gcc8.git fetched at 2019-Feb-08 10:31:28 [...] > 2019-Feb-09 08:39:33 :: gcc8: closes bugs: 36038 36045 [...] > 2019-Feb-09 09:24:15 :: updated /gears/g/gcc8.git branch `sisyphus' > 2019-Feb-09 09:24:31 :: gears update OK > 2019-Feb-09 09:24:31 :: task #221014 for sisyphus DONE В этой сборке g++ (не gcc, только g++) по умолчанию включено -Werror=return-type; это было сделано после того, как стало ясно, что, начиная с версии 8, g++ при включённой оптимизации в следующих двух случаях генерит код, практически непригодный для выполнения: 1. no return statement in function returning non-void 2. control reaches end of non-void function Согласно стандарту C++, компилятор при обработке такого кода праве делать всё что угодно, и g++ теперь буквально не делает возврата из таких функций. Прежние версии g++ вели себя более гуманно, реализуя поведение, свойственное компиляторам C: программы работали нормально, когда не использовали возвращаемое значение таких функций. Таким образом, при использовании g++ >= 8 все такие функции следует исправить, либо меняя тип возвращаемого значения на void, либо реализуя возвращение значения во всех случаях. Я ожидаю, что исправлению подлежат около 80 пакетов, более точно можно будет сказать по результатам тестовой пересборки. Подробнее о проблеме см. https://bugzilla.altlinux.org/36038 -- ldv [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 801 bytes --] ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [devel] I: g++ -Werror=return-type by default 2019-02-11 0:39 ` [devel] I: g++ -Werror=return-type by default Dmitry V. Levin @ 2019-02-11 10:23 ` Dmitry V. Levin 2019-02-11 13:06 ` Антон Мидюков 0 siblings, 1 reply; 15+ messages in thread From: Dmitry V. Levin @ 2019-02-11 10:23 UTC (permalink / raw) To: ALT Devel discussion list [-- Attachment #1: Type: text/plain, Size: 2642 bytes --] On Mon, Feb 11, 2019 at 03:39:27AM +0300, Dmitry V. Levin wrote: [...] > Я ожидаю, что исправлению подлежат около 80 пакетов, более точно можно > будет сказать по результатам тестовой пересборки. Их оказалось 95: AlephOne-1.0.1-alt1.2 ananas-0.9.5-alt10 ann-1.1.2-alt4 antico-deluxe-0.1.96-alt1.2 arpage-0.3.3-alt3_24 asylum-0.3.2-alt1_16 bloboats-1.0.2-alt2 bmcontrol-1.1-alt3 canorus-0.6svn-alt1.qa2 ceferino-0.97.8-alt2.qa1 CGenius-1.9.9.6beta-alt1 cooldown-24-alt1.1 csmash-0.6.6-alt3_32 ctorrent-3.3.2-alt1.1.qa1.1 desmume-0.9.11-alt2 duel3-0.1-alt3_0.24.20060225.qa1 extrema-4.4.5-alt2 fbg-0.9.1-alt3_12 fbpager-0.1.4-alt8.qa1 fceux-2.2.3-alt1 fontmatrix-0.9.99-alt1 freehdl-0.0.8-alt4 gav-0.8.0-alt4.qa2 glob2-0.9.4.4-alt1.qa7.1 glsl-optimizer-0.1.0-alt1.git20140820 gnome-peercast-0.5.4-alt3.qa2 imule-1.4.6-alt5 intde-1-alt2 ipsumdump-1.86-alt1 java-1.8.0-openjdk-0:1.8.0.151-alt1_5.b12jpp8 jvgs-0.5-alt2.1.qa1 karbowanecwallet-1.3.1-alt1 kbookocr-2.1.0-alt2 kismet-2014.02.R1-alt1 kodi-addon-inputstream-adaptive-18.0-alt1 kumir-1.9.1.2810-alt2 lib2geom-20081103-alt1.5 libfreeimage-3.18.0-alt1 libplotmm-0.1.2-alt2 libprojectM-2.1.0-alt12 libqaccessibilityclient-0.1.1-alt1 libv-1.90-alt9.2 lopsus-1.4.0.1-alt1.qa1 love-11.1-alt1_2 lprof-1.11.4.1-alt7.20100921 mapsoft-20180722-alt1 marsyas-0.6.0-alt1.alpha.git20150301.3 megafuse-1.0.0-alt3.3 meshlab-2016.12-alt3 milkytracker-1.02.00-alt2_1 mirall-1.0.2-alt5 mpip-3.3-alt6.svn20140313 netgen-6.2.1808-alt1 nted-1.10.18-alt3 numptyphysics-0.3.160-alt1 octave-optim-1:1.5.2-alt3 opendx-4.4.4-alt7 openexr-2.2.0-alt1.1 openscada-0.9.0-alt2 paris-traceroute-0.92-alt1 perl-Data-Array2ArrayMap-SDB-0.15-alt1.2 perl-JavaScript-V8-0.070-alt7.1 pfstools-2.1.0-alt3 php7-pdo_sqlsrv-7.2.14-alt1 picmicrosim-1.0-alt3 polyml-5.4.1-alt3.1 praat-6.0.46-alt1 printer-driver-splix-2.0.1-alt1.svn315 procbench-0.9.0a-alt3.1 pure-doc-0.3-alt2 python-module-islpy-2014.2-alt2.1.1.1 python-module-meshpy-2014.1-alt3.git20140706.1.1 qcat-0.5-alt5.1.qa1 qkismet-0.3.1-alt1.qa1 qorganizer-3.1.5-alt1 qstopmotion-2.3.2-alt2 qt-fsarchiver-0.8.4.0-alt1 qtrainer-0.5.2-alt2.qa2 ring-project-20180826-alt3 rosa-media-player-1.6.11-alt2 rxclient-1.0.0-alt1 scilab-6.0.1-alt3 scim-1.4.17-alt2 sfxr-sdl-1.1-alt1 sidplayfp-1.4.3-alt1 sidplay-libs-2.1.1-alt1_23 SimGear-2018.2.2-alt1 sprng-4.4-alt1 texlive-2018-alt2_7 verlihub-0.9.8e-alt2 verlihub-plugin-python-1.1-alt2.1.1.1 verlihub-plugins-0.1-alt2.qa2.1 verlihub-plugins-lua51-1.8.1-alt1.qa2 xevil-2.02r2-alt2 yaafe-0.64-alt2.git20130420 -- ldv [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 801 bytes --] ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [devel] I: g++ -Werror=return-type by default 2019-02-11 10:23 ` Dmitry V. Levin @ 2019-02-11 13:06 ` Антон Мидюков 2019-02-11 13:20 ` Sergey V Turchin 0 siblings, 1 reply; 15+ messages in thread From: Антон Мидюков @ 2019-02-11 13:06 UTC (permalink / raw) To: devel 11.02.2019 17:23, Dmitry V. Levin пишет: > On Mon, Feb 11, 2019 at 03:39:27AM +0300, Dmitry V. Levin wrote: > [...] >> Я ожидаю, что исправлению подлежат около 80 пакетов, более точно можно >> будет сказать по результатам тестовой пересборки. > Их оказалось 95: > > meshlab-2016.12-alt3 Я его буду обновлять. Скорее всего в новой версии (бета) всё ок. > openscada-0.9.0-alt2 Тут бы дождаться релиза 0.9.1. Его надо с qt5 собирать, а сизифный qt5 пока не поддерживается. Поддержка gcc8 скорее всего тоже добавится. В крайнем случае, можно временно удалить, если будет мешать бранчеванию. Соберу, как выйдет 0.9.1 вновь. > python-module-islpy-2014.2-alt2.1.1.1 > python-module-meshpy-2014.1-alt3.git20140706.1.1 Я занялся также обновлением этих двух крайне устаревших пакетов. -- С уважением, Антон Мидюков <antohami@altlinux.org> ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [devel] I: g++ -Werror=return-type by default 2019-02-11 13:06 ` Антон Мидюков @ 2019-02-11 13:20 ` Sergey V Turchin 2019-02-11 13:29 ` Антон Мидюков 0 siblings, 1 reply; 15+ messages in thread From: Sergey V Turchin @ 2019-02-11 13:20 UTC (permalink / raw) To: ALT Linux Team development discussions On Monday, 11 February 2019 16:06:22 MSK Антон Мидюков wrote: [...] > Его надо с qt5 собирать, а сизифный qt5 пока не поддерживается. Странно. Он почти не старый. [...] -- Regards, Sergey. ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [devel] I: g++ -Werror=return-type by default 2019-02-11 13:20 ` Sergey V Turchin @ 2019-02-11 13:29 ` Антон Мидюков 2019-02-11 14:00 ` Sergey V Turchin 0 siblings, 1 reply; 15+ messages in thread From: Антон Мидюков @ 2019-02-11 13:29 UTC (permalink / raw) To: devel 11.02.2019 20:20, Sergey V Turchin пишет: > On Monday, 11 February 2019 16:06:22 MSK Антон Мидюков wrote: > > [...] >> Его надо с qt5 собирать, а сизифный qt5 пока не поддерживается. > Странно. Он почти не старый. > > [...] > qt5 в Сизифе для openscada слишком новый. -- С уважением, Антон Мидюков <antohami@altlinux.org> ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [devel] I: g++ -Werror=return-type by default 2019-02-11 13:29 ` Антон Мидюков @ 2019-02-11 14:00 ` Sergey V Turchin 2019-02-11 14:06 ` Антон Мидюков 0 siblings, 1 reply; 15+ messages in thread From: Sergey V Turchin @ 2019-02-11 14:00 UTC (permalink / raw) To: ALT Linux Team development discussions On Monday, 11 February 2019 16:29:23 MSK Антон Мидюков wrote: > 11.02.2019 20:20, Sergey V Turchin пишет: > > On Monday, 11 February 2019 16:06:22 MSK Антон Мидюков wrote: > > > > [...] > > > >> Его надо с qt5 собирать, а сизифный qt5 пока не поддерживается. > > > > Странно. Он почти не старый. > > > > [...] > > qt5 в Сизифе для openscada слишком новый. А какой Qt5 поддерживается? Оно должно быть совместимо сверху вниз. -- Regards, Sergey. ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [devel] I: g++ -Werror=return-type by default 2019-02-11 14:00 ` Sergey V Turchin @ 2019-02-11 14:06 ` Антон Мидюков 2019-02-11 14:15 ` [devel] openscada qt-5.11 Sergey V Turchin 0 siblings, 1 reply; 15+ messages in thread From: Антон Мидюков @ 2019-02-11 14:06 UTC (permalink / raw) To: devel 11.02.2019 21:00, Sergey V Turchin пишет: > On Monday, 11 February 2019 16:29:23 MSK Антон Мидюков wrote: >> 11.02.2019 20:20, Sergey V Turchin пишет: >>> On Monday, 11 February 2019 16:06:22 MSK Антон Мидюков wrote: >>> >>> [...] >>> >>>> Его надо с qt5 собирать, а сизифный qt5 пока не поддерживается. >>> Странно. Он почти не старый. >>> >>> [...] >> qt5 в Сизифе для openscada слишком новый. > А какой Qt5 поддерживается? Оно должно быть совместимо сверху вниз. 5.9 точно поддерживается. -- С уважением, Антон Мидюков <antohami@altlinux.org> ^ permalink raw reply [flat|nested] 15+ messages in thread
* [devel] openscada qt-5.11 2019-02-11 14:06 ` Антон Мидюков @ 2019-02-11 14:15 ` Sergey V Turchin 2019-02-11 15:36 ` Антон Мидюков 0 siblings, 1 reply; 15+ messages in thread From: Sergey V Turchin @ 2019-02-11 14:15 UTC (permalink / raw) To: ALT Linux Team development discussions On Monday, 11 February 2019 17:06:41 MSK Антон Мидюков wrote: > 11.02.2019 21:00, Sergey V Turchin пишет: > > On Monday, 11 February 2019 16:29:23 MSK Антон Мидюков wrote: > >> 11.02.2019 20:20, Sergey V Turchin пишет: > >>> On Monday, 11 February 2019 16:06:22 MSK Антон Мидюков wrote: > >>> > >>> [...] > >>> > >>>> Его надо с qt5 собирать, а сизифный qt5 пока не поддерживается. > >>> > >>> Странно. Он почти не старый. > >>> > >>> [...] > >> > >> qt5 в Сизифе для openscada слишком новый. > > > > А какой Qt5 поддерживается? Оно должно быть совместимо сверху вниз. > > 5.9 точно поддерживается. А что не так c 5.11? -- Regards, Sergey. ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [devel] openscada qt-5.11 2019-02-11 14:15 ` [devel] openscada qt-5.11 Sergey V Turchin @ 2019-02-11 15:36 ` Антон Мидюков 2019-02-11 16:40 ` Dmitry V. Levin 0 siblings, 1 reply; 15+ messages in thread From: Антон Мидюков @ 2019-02-11 15:36 UTC (permalink / raw) To: devel 11.02.2019 21:15, Sergey V Turchin пишет: > On Monday, 11 February 2019 17:06:41 MSK Антон Мидюков wrote: >> 11.02.2019 21:00, Sergey V Turchin пишет: >>> On Monday, 11 February 2019 16:29:23 MSK Антон Мидюков wrote: >>>> [...] >>>> qt5 в Сизифе для openscada слишком новый. >>> А какой Qt5 поддерживается? Оно должно быть совместимо сверху вниз. >> 5.9 точно поддерживается. > А что не так c 5.11? http://git.altlinux.org/tasks/221272/logs/events.1.1.log -- С уважением, Антон Мидюков <antohami@altlinux.org> ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [devel] openscada qt-5.11 2019-02-11 15:36 ` Антон Мидюков @ 2019-02-11 16:40 ` Dmitry V. Levin 2019-02-11 16:56 ` Антон Мидюков 0 siblings, 1 reply; 15+ messages in thread From: Dmitry V. Levin @ 2019-02-11 16:40 UTC (permalink / raw) To: ALT Devel discussion list [-- Attachment #1: Type: text/plain, Size: 678 bytes --] On Mon, Feb 11, 2019 at 10:36:33PM +0700, Антон Мидюков wrote: > 11.02.2019 21:15, Sergey V Turchin пишет: > > On Monday, 11 February 2019 17:06:41 MSK Антон Мидюков wrote: > >> 11.02.2019 21:00, Sergey V Turchin пишет: > >>> On Monday, 11 February 2019 16:29:23 MSK Антон Мидюков wrote: > >>>> [...] > >>>> qt5 в Сизифе для openscada слишком новый. > >>> А какой Qt5 поддерживается? Оно должно быть совместимо сверху вниз. > >> 5.9 точно поддерживается. > > А что не так c 5.11? > http://git.altlinux.org/tasks/221272/logs/events.1.1.log А какое отношение имеет qt5 к ошибкам no return statement in function returning non-void в пакете openscada? -- ldv [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 801 bytes --] ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [devel] openscada qt-5.11 2019-02-11 16:40 ` Dmitry V. Levin @ 2019-02-11 16:56 ` Антон Мидюков 2019-02-18 7:12 ` Антон Мидюков 0 siblings, 1 reply; 15+ messages in thread From: Антон Мидюков @ 2019-02-11 16:56 UTC (permalink / raw) To: devel 11.02.2019 23:40, Dmitry V. Levin пишет: > On Mon, Feb 11, 2019 at 10:36:33PM +0700, Антон Мидюков wrote: >> 11.02.2019 21:15, Sergey V Turchin пишет: >>> On Monday, 11 February 2019 17:06:41 MSK Антон Мидюков wrote: >>>> 11.02.2019 21:00, Sergey V Turchin пишет: >>>>> On Monday, 11 February 2019 16:29:23 MSK Антон Мидюков wrote: >>>>>> [...] >>>>>> qt5 в Сизифе для openscada слишком новый. >>>>> А какой Qt5 поддерживается? Оно должно быть совместимо сверху вниз. >>>> 5.9 точно поддерживается. >>> А что не так c 5.11? >> http://git.altlinux.org/tasks/221272/logs/events.1.1.log > А какое отношение имеет qt5 к ошибкам > no return statement in function returning non-void > в пакете openscada? Ой. Туплю. Сейчас до того места не соберётся. -- С уважением, Антон Мидюков <antohami@altlinux.org> ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [devel] openscada qt-5.11 2019-02-11 16:56 ` Антон Мидюков @ 2019-02-18 7:12 ` Антон Мидюков 2019-02-18 7:38 ` Vladislav Zavjalov 0 siblings, 1 reply; 15+ messages in thread From: Антон Мидюков @ 2019-02-18 7:12 UTC (permalink / raw) To: devel 11.02.2019 23:56, Антон Мидюков пишет: > 11.02.2019 23:40, Dmitry V. Levin пишет: >> On Mon, Feb 11, 2019 at 10:36:33PM +0700, Антон Мидюков wrote: >>> 11.02.2019 21:15, Sergey V Turchin пишет: >>>> On Monday, 11 February 2019 17:06:41 MSK Антон Мидюков wrote: >>>>> 11.02.2019 21:00, Sergey V Turchin пишет: >>>>>> On Monday, 11 February 2019 16:29:23 MSK Антон Мидюков wrote: >>>>>>> [...] >>>>>>> qt5 в Сизифе для openscada слишком новый. >>>>>> А какой Qt5 поддерживается? Оно должно быть совместимо сверху вниз. >>>>> 5.9 точно поддерживается. >>>> А что не так c 5.11? >>> http://git.altlinux.org/tasks/221272/logs/events.1.1.log >> А какое отношение имеет qt5 к ошибкам >> no return statement in function returning non-void >> в пакете openscada? > Ой. Туплю. Сейчас до того места не соберётся. > Вот теперь собирается до того места: http://git.altlinux.org/tasks/221272/logs/events.4.1.log Возможно, qt5 лишь как-то косвенно причастен. -- С уважением, Антон Мидюков <antohami@altlinux.org> ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [devel] openscada qt-5.11 2019-02-18 7:12 ` Антон Мидюков @ 2019-02-18 7:38 ` Vladislav Zavjalov 2019-02-18 7:59 ` Vladislav Zavjalov 0 siblings, 1 reply; 15+ messages in thread From: Vladislav Zavjalov @ 2019-02-18 7:38 UTC (permalink / raw) To: ALT Linux Team development discussions On Mon, Feb 18, 2019 at 02:12:16PM +0700, Антон Мидюков wrote: > 11.02.2019 23:56, Антон Мидюков пишет: > > 11.02.2019 23:40, Dmitry V. Levin пишет: > >> On Mon, Feb 11, 2019 at 10:36:33PM +0700, Антон Мидюков wrote: > >>> 11.02.2019 21:15, Sergey V Turchin пишет: > >>>> On Monday, 11 February 2019 17:06:41 MSK Антон Мидюков wrote: > >>>>> 11.02.2019 21:00, Sergey V Turchin пишет: > >>>>>> On Monday, 11 February 2019 16:29:23 MSK Антон Мидюков wrote: > >>>>>>> [...] > >>>>>>> qt5 в Сизифе для openscada слишком новый. > >>>>>> А какой Qt5 поддерживается? Оно должно быть совместимо сверху вниз. > >>>>> 5.9 точно поддерживается. > >>>> А что не так c 5.11? > >>> http://git.altlinux.org/tasks/221272/logs/events.1.1.log > >> А какое отношение имеет qt5 к ошибкам > >> no return statement in function returning non-void > >> в пакете openscada? > > Ой. Туплю. Сейчас до того места не соберётся. > > > Вот теперь собирается до того места: > > http://git.altlinux.org/tasks/221272/logs/events.4.1.log > > Возможно, qt5 лишь как-то косвенно причастен. Похоже, что в openscada/src/tmess.h:48 определяется макро message, и это ломает вызов __ec.message() в /usr/include/c++/8/future ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [devel] openscada qt-5.11 2019-02-18 7:38 ` Vladislav Zavjalov @ 2019-02-18 7:59 ` Vladislav Zavjalov 2019-02-18 8:09 ` Антон Мидюков 0 siblings, 1 reply; 15+ messages in thread From: Vladislav Zavjalov @ 2019-02-18 7:59 UTC (permalink / raw) To: ALT Linux Team development discussions On Mon, Feb 18, 2019 at 10:38:30AM +0300, Vladislav Zavjalov wrote: > On Mon, Feb 18, 2019 at 02:12:16PM +0700, Антон Мидюков wrote: > > Вот теперь собирается до того места: > > > > http://git.altlinux.org/tasks/221272/logs/events.4.1.log > > > > Возможно, qt5 лишь как-то косвенно причастен. > > Похоже, что в openscada/src/tmess.h:48 определяется макро message, > и это ломает вызов __ec.message() в /usr/include/c++/8/future Исправить можно, например, переставив #include в файлах openscada/src/moduls/ui/QTCfg/qtcfg.cpp openscada/src/moduls/ui/QTCfg/tuimod.cpp так чтобы "qtcfg.h" шел перед <tmess.h> ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [devel] openscada qt-5.11 2019-02-18 7:59 ` Vladislav Zavjalov @ 2019-02-18 8:09 ` Антон Мидюков 0 siblings, 0 replies; 15+ messages in thread From: Антон Мидюков @ 2019-02-18 8:09 UTC (permalink / raw) To: devel 18.02.2019 14:59, Vladislav Zavjalov пишет: > On Mon, Feb 18, 2019 at 10:38:30AM +0300, Vladislav Zavjalov wrote: >> On Mon, Feb 18, 2019 at 02:12:16PM +0700, Антон Мидюков wrote: >>> Вот теперь собирается до того места: >>> >>> http://git.altlinux.org/tasks/221272/logs/events.4.1.log >>> >>> Возможно, qt5 лишь как-то косвенно причастен. >> Похоже, что в openscada/src/tmess.h:48 определяется макро message, >> и это ломает вызов __ec.message() в /usr/include/c++/8/future > Исправить можно, например, переставив #include в файлах > openscada/src/moduls/ui/QTCfg/qtcfg.cpp > openscada/src/moduls/ui/QTCfg/tuimod.cpp > так чтобы "qtcfg.h" шел перед <tmess.h> Спасибо, попробую. -- С уважением, Антон Мидюков <antohami@altlinux.org> ^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2019-02-18 8:09 UTC | newest] Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2019-02-11 0:39 ` [devel] I: g++ -Werror=return-type by default Dmitry V. Levin 2019-02-11 10:23 ` Dmitry V. Levin 2019-02-11 13:06 ` Антон Мидюков 2019-02-11 13:20 ` Sergey V Turchin 2019-02-11 13:29 ` Антон Мидюков 2019-02-11 14:00 ` Sergey V Turchin 2019-02-11 14:06 ` Антон Мидюков 2019-02-11 14:15 ` [devel] openscada qt-5.11 Sergey V Turchin 2019-02-11 15:36 ` Антон Мидюков 2019-02-11 16:40 ` Dmitry V. Levin 2019-02-11 16:56 ` Антон Мидюков 2019-02-18 7:12 ` Антон Мидюков 2019-02-18 7:38 ` Vladislav Zavjalov 2019-02-18 7:59 ` Vladislav Zavjalov 2019-02-18 8:09 ` Антон Мидюков
ALT Linux Team development discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/devel/0 devel/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 devel devel/ http://lore.altlinux.org/devel \ devel@altlinux.org devel@altlinux.ru devel@lists.altlinux.org devel@lists.altlinux.ru devel@linux.iplabs.ru mandrake-russian@linuxteam.iplabs.ru sisyphus@linuxteam.iplabs.ru public-inbox-index devel Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.devel AGPL code for this site: git clone https://public-inbox.org/public-inbox.git