[devel] Promise ataraid

[Marat Khairullin <xmm@altlinux.ru>]

Очередные проблемы с Promise FastTrak TX2 bios 2.00.0.24 в Master 2.2
К кому обратиться? В 2.0 эта карта работала. 
Пробовал 2.4.20-alt{5|9|10}-up.
Никто не тестировал?

/var/log/messages: /* Primary IDE - DISABLED */
Nov  3 18:01:12 nksto kernel: PDC20270: IDE controller on PCI bus 02 dev 10
Nov  3 18:01:12 nksto kernel: PCI: Found IRQ 11 for device 02:02.0
Nov  3 18:01:12 nksto kernel: PCI: Sharing IRQ 11 with 00:1f.2
Nov  3 18:01:12 nksto kernel: PDC20270: chipset revision 2
Nov  3 18:01:12 nksto kernel: PDC20270: not 100%% native mode: will probe irqs later
Nov  3 18:01:12 nksto kernel:     ide0: BM-DMA at 0xa400-0xa407, BIOS settings: hda:pio, hdb:pio
Nov  3 18:01:12 nksto kernel:     ide2: BM-DMA at 0xa408-0xa40f, BIOS settings: hde:pio, hdf:pio
Nov  3 18:01:12 nksto kernel: hda: ST340014A, ATA DISK drive
Nov  3 18:01:12 nksto kernel: hdd: HL-DT-ST CD-ROM GCR-8520B, ATAPI CD/DVD-ROM drive
Nov  3 18:01:12 nksto kernel: hde: ST340014A, ATA DISK drive
Nov  3 18:01:12 nksto kernel: ide0 at 0x9400-0x9407,0x9802 on irq 11
Nov  3 18:01:12 nksto kernel: ide1 at 0x170-0x177,0x376 on irq 15
Nov  3 18:01:12 nksto kernel: ide2 at 0x9c00-0x9c07,0xa002 on irq 11
Nov  3 18:01:12 nksto kernel: blk: queue c02a80e4, I/O limit 4095Mb (mask 0xffffffff)
Nov  3 18:01:12 nksto kernel: hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100)
Nov  3 18:01:12 nksto kernel: blk: queue c02a876c, I/O limit 4095Mb (mask 0xffffffff)
Nov  3 18:01:12 nksto kernel: hde: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100)
Nov  3 18:01:12 nksto kernel: Partition check:
Nov  3 18:01:12 nksto kernel:  hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
Nov  3 18:01:12 nksto kernel:  hde: hde1 hde2 < hde5 hde6 hde7 hde8 >

[root]# cat /proc/pci
PCI devices found:
  ...
  Bus  2, device   2, function  0:
    RAID bus controller: Promise Technology, Inc. 20268R (rev 2).
      IRQ 11.
      Master Capable.  Latency=32.  Min Gnt=4.Max Lat=18.
      I/O at 0x9000 [0x9007].
      I/O at 0x9400 [0x9403].
      I/O at 0x9800 [0x9807].
      I/O at 0x9c00 [0x9c03].
      I/O at 0xa000 [0xa00f].
      Non-prefetchable 32 bit memory at 0xe7000000 [0xe700ffff].

[root@nksto root]# modprobe pdcraid
/lib/modules/2.4.20-alt9-up/kernel/drivers/ide/pdcraid.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
      You may find more information in syslog or the output from dmesg
/lib/modules/2.4.20-alt9-up/kernel/drivers/ide/pdcraid.o: insmod /lib/modules/2.4.20-alt9-up/kernel/drivers/ide/pdcraid.o failed
/lib/modules/2.4.20-alt9-up/kernel/drivers/ide/pdcraid.o: insmod pdcraid failed

В messages появляется:
Nov  3 18:28:02 nksto kernel: Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found
                                                   ^^^^^^^^^^^^ - интересное замечание...,
когда покупал - расчитывал получить hardware raid :). Просветите, кто знает.