From: "Константин Палачев" <pku@basealt.ru> To: devel-sbc@lists.altlinux.org Subject: [devel-sbc] RPi4 Device [14e4:2711] не работает Wifi Date: Wed, 2 Dec 2020 10:22:55 +0300 Message-ID: <2d6621f4-e780-372e-7fbd-381b7c6395e4@basealt.ru> (raw) [-- Attachment #1: Type: text/plain, Size: 1637 bytes --] Здравствуйте. Есть компьютер RPi4 (модель в которой корпус в виде клавиатуры) https://static.chipdip.ru/lib/832/DOC004832019.pdf Информация lspci: 00:00.0 PCI bridge [0604]: Broadcom Inc. and subsidiaries Device [14e4:2711] (rev 20) Kernel driver in use: pcieport Текущее ядро: linux ws91-rpi4.stend.alt 5.4.61-rpi-def-alt1 #2 SMP Sat Sep 12 06:00:12 UTC 2020 aarch64 GNU/Linux Посмотрел что поддержка устройства [14e4:2711] начинается с ядра 5.5 https://cateee.net/lkddb/web-lkddb/NET_VENDOR_BROADCOM.html lkddb of "" "" "brcm,bcm2711-genet-v5" : CONFIG_BCMGENET CONFIG_ETHERNET CONFIG_NET_VENDOR_BROADCOM : drivers/net/ethernet/broadcom/genet/bcmgenet.c # in 5.5–5.9, 5.10-rc+HEAD update-kernel выполнено, ядро актуальное Подскажите пожалуйста что можно сделать для обеспечения работы WiFi. Файлы с диагностикой прилагаю. Когда можно ожидать сборку с новым ядром ? -- Просьба при ответе использовать функцию <ОТВЕТИТЬ ВСЕМ>, не удалять тему и предыдущий текст письма! ____________________________________________________________ С уважением, Константин Палачев, специалист по продукту. Компания «Базальт СПО» pku@basealt.ru http://basealt.ru http://www.altlinux.org/ https://getalt.org/ru/ [-- Attachment #2: sysreport-20201201.tar.xz --] [-- Type: application/x-xz, Size: 100492 bytes --] [-- Attachment #3: uname.txt --] [-- Type: text/plain, Size: 340 bytes --] Linux ws91-rpi4.stend.alt 5.4.61-rpi-def-alt1 #2 SMP Sat Sep 12 06:00:12 UTC 2020 aarch64 GNU/Linux https://cateee.net/lkddb/web-lkddb/NET_VENDOR_BROADCOM.html lkddb of "" "" "brcm,bcm2711-genet-v5" : CONFIG_BCMGENET CONFIG_ETHERNET CONFIG_NET_VENDOR_BROADCOM : drivers/net/ethernet/broadcom/genet/bcmgenet.c # in 5.5–5.9, 5.10-rc+HEAD [-- Attachment #4: inxiv7.txt --] [-- Type: text/plain, Size: 4991 bytes --] System: Host: ws91-rpi4.stend.alt Kernel: 5.4.61-rpi-def-alt1 aarch64 bits: 64 compiler: gcc v: 8.4.1 Desktop: MATE 1.22.2 info: mate-panel wm: marco 1.22.3 dm: LightDM 1.30.0 Distro: ALT Workstation 9.1 Machine: Type: ARM Device System: Raspberry Pi 400 Rev 1.0 details: BCM2835 rev: c03130 serial: 10000000c408cb55 Battery: Device-1: hidpp_battery_0 model: Logitech Wireless Mouse serial: 4022-00-00-00-00 charge: 55% (should be ignored) rechargeable: yes status: Discharging Memory: RAM: total: 3.68 GiB used: 1.27 GiB (34.5%) RAM Report: permissions: Unable to run dmidecode. Root privileges required. CPU: Topology: Quad Core model: N/A variant: cortex-a72 bits: 64 type: MCP arch: ARMv8 rev: 3 bogomips: 432 Speed: 600 MHz min/max: 600/1800 MHz Core speeds (MHz): 1: 600 2: 600 3: 600 4: 600 Features: asimd cpuid crc32 evtstrm fp Graphics: Device-1: bcm2711-vc5 driver: vc4_drm v: N/A bus ID: N/A chip ID: brcm:gpu Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc Display: x11 server: X.Org 1.20.8 compositor: marco v: 1.22.3 driver: modesetting unloaded: fbdev resolution: 1920x1080~60Hz s-dpi: 96 Message: Unable to show advanced data. Required tool glxinfo missing. Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A chip ID: brcm:bcm2835_audio Device-2: bcm2711-hdmi0 driver: N/A bus ID: N/A chip ID: brcm:soc Device-3: bcm2711-hdmi1 driver: N/A bus ID: N/A chip ID: brcm:soc Sound Server: ALSA v: k5.4.61-rpi-def-alt1 Network: Message: No ARM data found for this feature. IF-ID-1: bond0 state: down mac: 52:24:d1:6a:f2:29 IF-ID-2: bonding_masters state: N/A speed: N/A duplex: N/A mac: N/A IF-ID-3: erspan0 state: down mac: 00:00:00:00:00:00 IF-ID-4: eth4 state: up speed: 1000 Mbps duplex: full mac: dc:a6:32:df:ca:54 IP v4: 10.4.129.134/23 type: dynamic noprefixroute scope: global broadcast: 10.4.129.255 IP v6: 2a0c:88c0:1:813:8447:ff45:d670:a79c/64 type: dynamic noprefixroute scope: global IP v6: fe80::d3d0:48f:4a9:810b/64 type: noprefixroute scope: link IF-ID-5: gre0 state: down mac: 00:00:00:00 IF-ID-6: gretap0 state: down mac: 00:00:00:00:00:00 IF-ID-7: ip6gre0 state: down mac: 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00 IF-ID-8: ip6tnl0 state: down mac: 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00 IF-ID-9: sit0 state: down mac: 00:00:00:00 IF-ID-10: tunl0 state: down mac: 00:00:00:00 WAN IP: No WAN IP found. Connected to web? SSL issues? Try --no-dig Drives: Local Storage: total: 59.02 GiB used: 6.98 GiB (11.8%) ID-1: /dev/mmcblk0 model: SB32G size: 29.72 GiB serial: 0xa4520769 scheme: MBR ID-2: /dev/sda type: USB model: SMI USB size: 29.30 GiB serial: DISK rev: 1100 scheme: MBR Message: No Optical or Floppy data was found. RAID: Message: No RAID data was found. Partition: ID-1: / size: 28.88 GiB used: 6.94 GiB (24.0%) fs: ext4 dev: /dev/mmcblk0p2 label: N/A uuid: 77a1fba2-d0ce-421f-9286-ace6b3911050 ID-2: /boot/efi raw size: 256.0 MiB size: <superuser/root required> used: <superuser/root required> fs: vfat dev: /dev/mmcblk0p1 label: N/A uuid: B45D-F947 ID-3: /dev size: 1.71 GiB used: 96 KiB (0.0%) fs: devtmpfs source: ERR-102 label: N/A uuid: N/A ID-4: /run/media/user/ECB0-4A5F size: 29.28 GiB used: 48.2 MiB (0.2%) fs: vfat dev: /dev/sda1 label: N/A uuid: ECB0-4A5F Swap: Alert: No Swap data was found. Unmounted: Message: No unmounted partitions found. USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 1 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 1-1:2 info: VIA Labs Hub ports: 4 rev: 2.1 speed: 480 Mb/s chip ID: 2109:3431 Device-1: 1-1.1:3 info: Logitech Keyboard K120 type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s chip ID: 046d:c31c Device-2: 1-1.2:6 info: Silicon Motion - Taiwan (formerly Feiya ) type: Mass Storage driver: usb-storage interfaces: 1 rev: 2.1 speed: 480 Mb/s chip ID: 090c:2000 Device-3: 1-1.3:5 info: Logitech Unifying Receiver type: Keyboard,Mouse driver: logitech-djreceiver,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s chip ID: 046d:c534 Device-4: 1-1.4:4 info: Holtek type: Keyboard,HID driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s chip ID: 04d9:0007 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Hub: 3-0:1 info: Full speed (or root) Hub ports: 8 rev: 2.0 speed: 480 Mb/s chip ID: 1d6b:0002 Hub: 4-0:1 info: Full speed (or root) Hub ports: 8 rev: 3.0 speed: 5 Gb/s chip ID: 1d6b:0003 Sensors: System Temperatures: cpu: 36.5 C mobo: N/A Fan Speeds (RPM): N/A Info: Processes: 225 Uptime: 50m Init: systemd v: 243 runlevel: 5 default: 5 Compilers: gcc: N/A Shell: bash v: 4.4.23 running in: mate-terminal inxi: 3.1.00 [-- Attachment #5: lspci.txt --] [-- Type: text/plain, Size: 332 bytes --] 00:00.0 PCI bridge [0604]: Broadcom Inc. and subsidiaries Device [14e4:2711] (rev 20) Kernel driver in use: pcieport 01:00.0 USB controller [0c03]: VIA Technologies, Inc. VL805 USB 3.0 Host Controller [1106:3483] (rev 01) Subsystem: VIA Technologies, Inc. VL805 USB 3.0 Host Controller [1106:3483] Kernel driver in use: xhci_hcd
next reply other threads:[~2020-12-02 7:22 UTC|newest] Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-12-02 7:22 Константин Палачев [this message] 2020-12-02 16:56 ` Дмитрий Терехин 2020-12-07 10:09 ` Константин Палачев
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=2d6621f4-e780-372e-7fbd-381b7c6395e4@basealt.ru \ --to=pku@basealt.ru \ --cc=devel-sbc@lists.altlinux.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
Single-board computer software development discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/devel-sbc/0 devel-sbc/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 devel-sbc devel-sbc/ http://lore.altlinux.org/devel-sbc \ devel-sbc@lists.altlinux.org devel-sbc@lists.altlinux.ru devel-sbc@lists.altlinux.com public-inbox-index devel-sbc Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.devel-sbc AGPL code for this site: git clone https://public-inbox.org/public-inbox.git