Re: [d-kernel] 2.6.14-std26-up-alt2 && NF4

[Eugene Ostapets <eostapets@gmail.com>]

11.12.05, Sergey Vlasov<vsu altlinux.ru> написал(а):
> Теперь нужно пересоздать initrd с помощью mkinitrd без подобных
> фокусов:
>
>   mkinitrd -fv /boot/initrd-2.6.14-std26-up-alt2.img 2.6.14-std26-up-alt2
>
> (можете ещё прислать вывод этой команды), после чего смотреть, что
> происходит при загрузке с этим initrd.
Ничего, no rootfs... Я бы не начинал экспеременыт, если бы что-то
работало из коробки...


mkinitrd -fv /boot/initrd-2.6.14-std26-up-alt2.img 2.6.14-std26-up-alt2
mkinitrd: Generating module dependencies...
mkinitrd: ...done.
mkinitrd: Using modules: 
/lib/modules/2.6.14-std26-up-alt2/kernel/drivers/ide/ide-core.ko
/lib/modules/2.6.14-std26-up-alt2/kernel/drivers/ide/pci/generic.ko
/lib/modules/2.6.14-std26-up-alt2/kernel/drivers/ide/pci/amd74xx.ko
/lib/modules/2.6.14-std26-up-alt2/kernel/drivers/ide/ide-generic.ko
/lib/modules/2.6.14-std26-up-alt2/kernel/drivers/ide/ide-disk.ko
/lib/modules/2.6.14-std26-up-alt2/kernel/drivers/scsi/scsi_mod.ko
/lib/modules/2.6.14-std26-up-alt2/kernel/drivers/scsi/sd_mod.ko
/lib/modules/2.6.14-std26-up-alt2/kernel/drivers/scsi/libata.ko
/lib/modules/2.6.14-std26-up-alt2/kernel/drivers/scsi/sata_nv.ko
/lib/modules/2.6.14-std26-up-alt2/kernel/fs/reiserfs/reiserfs.ko
Contents of linuxrc:
#!/bin/sh
/bin/insmod -f /lib/modules/2.6.14-std26-up-alt2/kernel/drivers/ide/ide-core.ko
/bin/insmod -f /lib/modules/2.6.14-std26-up-alt2/kernel/drivers/ide/pci/generic.ko
/bin/insmod -f /lib/modules/2.6.14-std26-up-alt2/kernel/drivers/ide/pci/amd74xx.ko
/bin/insmod -f /lib/modules/2.6.14-std26-up-alt2/kernel/drivers/ide/ide-generic.ko
/bin/insmod -f /lib/modules/2.6.14-std26-up-alt2/kernel/drivers/ide/ide-disk.ko
/bin/insmod -f /lib/modules/2.6.14-std26-up-alt2/kernel/drivers/scsi/scsi_mod.ko
/bin/insmod -f /lib/modules/2.6.14-std26-up-alt2/kernel/drivers/scsi/sd_mod.ko
/bin/insmod -f /lib/modules/2.6.14-std26-up-alt2/kernel/drivers/scsi/libata.ko
/bin/insmod -f /lib/modules/2.6.14-std26-up-alt2/kernel/drivers/scsi/sata_nv.ko
/bin/insmod -f /lib/modules/2.6.14-std26-up-alt2/kernel/fs/reiserfs/reiserfs.ko
EncodeDev()
{
	echo $(( ($2 & 0xff) | ($1 << 8) | (($2 & ~0xff) << 12) ))
}
/bin/mount -t proc proc /proc
read cmdline </proc/cmdline
cmdline=" $cmdline "
if test -z "${cmdline##*[	 ]root=*}" ; then
	root="${cmdline##*[	 ]root=}"
	root="${root%%[	 ]*}"
	if test -z "${root##/dev/*}" ; then
		root="${root#/dev/}"
		(
		read ignored
		read ignored
		while read major minor size name ignored; do
			if test "$name" = "$root" ; then
				EncodeDev $major $minor >/proc/sys/kernel/real-root-dev
				break
			fi
		done
		) </proc/partitions

	fi
fi
/bin/umount /proc
mkinitrd: Inode count: 62
mkinitrd: Image size: 996K
mkinitrd: Created image from tree: /tmp/initrd.CGWTlM7800/tree -->
/tmp/initrd.CGWTlM7800/img
mkinitrd: Created romfs image file
mkinitrd: Installed ramdisk into /boot/initrd-2.6.14-std26-up-alt2.img
mkinitrd: Added bootsplash
"/etc/bootsplash/themes/current/config/bootsplash-1024x768.cfg" to the
/boot/initrd-2.6.14-std26-up-alt2.img
Ramdisk size: 1,6M

--
С уважением,
Евгений Остапец
uin: 23747217
jid: eugene_ostapets@jabber.ru