* [d-kernel] Неполучается поднять kernel версии 2.4.22-std-up-alt15 на машине с SIS 5511/2/3
@ 2004-02-15 21:23 Aleksey Avdeev
2004-02-16 8:55 ` Alexey Kotovich
2004-02-16 12:13 ` Sergey Vlasov
0 siblings, 2 replies; 12+ messages in thread
From: Aleksey Avdeev @ 2004-02-15 21:23 UTC (permalink / raw)
To: ALT Linux kernel packages development
[-- Attachment #1: Type: text/plain, Size: 412 bytes --]
Здравствуйте, уважаемые.
Не получается у меня поставить ядро 2.4.22-std-up-alt15 на
свой домашний старый пень (на чипсете SIS 5511/2/3).
Судя по логу - проблемы с поднятием IDE (файл serial.txt в
аттаче). Помогите пожалуйста.
PS: Для сравнения посылаю сообщения ядра 2.4.20-alt7-up, под
которым сейчас и живу (файл dmesg.gz в аттаче). Приношу извинения
за размер письма.
--
С уважением. Алексей.
[-- Attachment #2: dmesg.gz --]
[-- Type: application/x-compressed, Size: 3527 bytes --]
[-- Attachment #3: serial.txt --]
[-- Type: text/plain, Size: 3986 bytes --]
Linux version 2.4.22-std-up-alt15 (builder@mash.office.altlinux.ru) (gcc versi
on 2.96 20000731 (ALT Linux, build 2.96-alt6)) #1 Wed Dec 31 10:12:56 MSK 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000005000000 (usable)
BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
80MB LOWMEM available.
On node 0 totalpages: 20480
zone(0): 4096 pages.
zone(1): 16384 pages.
zone(2): 0 pages.
DMI not present.
Kernel command line: root=/dev/md0 ro pci=biosirq acpi=off noapic console=ttyS0
No local APIC present or hardware disabled
Initializing CPU#0
Detected 132.634 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 264.60 BogoMIPS
Memory: 78292k/81920k available (1193k kernel code, 3240k reserved, 502k data, 1
32k init, 0k highmem)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Intel Pentium with F0 0F bug - workaround enabled.
CPU: Intel Pentium 75 - 200 stepping 0c
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: none
ACPI: Subsystem revision 20031203
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xfda4c, last bus=7
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Using BIOS Interrupt Routing Table
PCI: Using BIOS for IRQ routing
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_I
RQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
PCI: Assigned IRQ 9 for device 00:0e.0
Redundant entry in serial pci_table. Please send the output of
lspci -vv, this message (12b9,1008,12b9,00ad)
and the manufacturer and name of serial board or modem board
to serial-pci-info@lists.sourceforge.net.
ttyS04 at port 0x4400 (irq = 9) is a 16550A
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 00:01.1
SIS5513: chipset revision 8
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS551x ATA 16 controller
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio
SIS5513: simplex device: DMA disabled
ide1: SIS5513 Bus-Master DMA disabled (BIOS)
hda: QUANTUM FIREBALLP AS10.2, ATA DISK drive
hdc: Maxtor 6E030L0, ATA DISK drive
Unable to handle kernel NULL pointer dereference at virtual address 00000000
printing eip:
00000000
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<00000000>] Not tainted
EFLAGS: 00010292
eax: 0000000c ebx: c02f6cc4 ecx: c02f6cc4 edx: 00000004
esi: c02f6cc4 edi: c02f6c14 ebp: c02f6c14 esp: c10fff24
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 1, stackpage=c10ff000)
Stack: c01b4308 c02f6cc4 c02f6c14 00000001 0c2f6cc4 c02f6cc4 00000001 000000a1
c02f6c14 c01c3b60 c02f6cc4 0000000c 00000418 0000000f 00000246 00000000
46000005 00000000 c02787a0 c4f7f000 00000001 c02f67c0 c02f6c14 0008e000
Call Trace: [<c01b4308>] [<c01c3b60>] [<c01c4621>] [<c01a6d74>] [<c0105000>]
[<c0105077>] [<c0107166>] [<c0105070>]
Code: Bad EIP value.
<0>Kernel panic: Attempted to kill init!
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [d-kernel] Неполучается поднять kernel версии 2.4.22-std-up-alt15 на машине с SIS 5511/2/3
2004-02-15 21:23 [d-kernel] Неполучается поднять kernel версии 2.4.22-std-up-alt15 на машине с SIS 5511/2/3 Aleksey Avdeev
@ 2004-02-16 8:55 ` Alexey Kotovich
2004-02-16 9:17 ` Anton Farygin
2004-02-16 12:13 ` Sergey Vlasov
1 sibling, 1 reply; 12+ messages in thread
From: Alexey Kotovich @ 2004-02-16 8:55 UTC (permalink / raw)
To: ALT Linux kernel packages development
re!
Aleksey Avdeev wrote:
> Не получается у меня поставить ядро 2.4.22-std-up-alt15 на
> свой домашний старый пень (на чипсете SIS 5511/2/3).
>
> Судя по логу - проблемы с поднятием IDE (файл serial.txt в
> аттаче). Помогите пожалуйста.
>
> PS: Для сравнения посылаю сообщения ядра 2.4.20-alt7-up, под
> которым сейчас и живу (файл dmesg.gz в аттаче). Приношу извинения
> за размер письма.
попробуй отключить CONFIG_BLK_DEV_IDEPNP (PNP EIDE support), если
таковой имеется в kernel-2.4.22.
--
Alexey ICQ:97715595
--
Paul's Law:
You can't fall off the floor.
> Linux version 2.4.22-std-up-alt15 (builder@mash.office.altlinux.ru) (gcc versi
> on 2.96 20000731 (ALT Linux, build 2.96-alt6)) #1 Wed Dec 31 10:12:56 MSK 2003
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000005000000 (usable)
> BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
> 0MB HIGHMEM available.
> 80MB LOWMEM available.
> On node 0 totalpages: 20480
> zone(0): 4096 pages.
> zone(1): 16384 pages.
> zone(2): 0 pages.
> DMI not present.
> Kernel command line: root=/dev/md0 ro pci=biosirq acpi=off noapic console=ttyS0
> No local APIC present or hardware disabled
> Initializing CPU#0
> Detected 132.634 MHz processor.
> Console: colour VGA+ 80x25
> Calibrating delay loop... 264.60 BogoMIPS
> Memory: 78292k/81920k available (1193k kernel code, 3240k reserved, 502k data, 1
> 32k init, 0k highmem)
> Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
> Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
> Mount cache hash table entries: 512 (order: 0, 4096 bytes)
> Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
> Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
> Intel Pentium with F0 0F bug - workaround enabled.
> CPU: Intel Pentium 75 - 200 stepping 0c
> Checking 'hlt' instruction... OK.
> POSIX conformance testing by UNIFIX
> mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
> mtrr: detected mtrr type: none
> ACPI: Subsystem revision 20031203
> ACPI: Interpreter disabled.
> PCI: PCI BIOS revision 2.10 entry at 0xfda4c, last bus=7
> PCI: Using configuration type 1
> PCI: Probing PCI hardware
> PCI: ACPI tables contain no PCI IRQ routing entries
> PCI: Probing PCI hardware (bus 00)
> PCI: Using BIOS Interrupt Routing Table
> PCI: Using BIOS for IRQ routing
> Linux NET4.0 for Linux 2.4
> Based upon Swansea University Computer Society NET3.039
> Initializing RT netlink socket
> Starting kswapd
> VFS: Disk quotas vdquot_6.5.1
> pty: 256 Unix98 ptys configured
> Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_I
> RQ SERIAL_PCI enabled
> ttyS00 at 0x03f8 (irq = 4) is a 16550A
> ttyS01 at 0x02f8 (irq = 3) is a 16550A
> PCI: Assigned IRQ 9 for device 00:0e.0
> Redundant entry in serial pci_table. Please send the output of
> lspci -vv, this message (12b9,1008,12b9,00ad)
> and the manufacturer and name of serial board or modem board
> to serial-pci-info@lists.sourceforge.net.
> ttyS04 at port 0x4400 (irq = 9) is a 16550A
> NET4: Frame Diverter 0.46
> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
> Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> SIS5513: IDE controller at PCI slot 00:01.1
> SIS5513: chipset revision 8
> SIS5513: not 100% native mode: will probe irqs later
> SIS5513: SiS551x ATA 16 controller
> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio
> SIS5513: simplex device: DMA disabled
> ide1: SIS5513 Bus-Master DMA disabled (BIOS)
> hda: QUANTUM FIREBALLP AS10.2, ATA DISK drive
> hdc: Maxtor 6E030L0, ATA DISK drive
> Unable to handle kernel NULL pointer dereference at virtual address 00000000
> printing eip:
> 00000000
> *pde = 00000000
> Oops: 0000
> CPU: 0
> EIP: 0010:[<00000000>] Not tainted
> EFLAGS: 00010292
> eax: 0000000c ebx: c02f6cc4 ecx: c02f6cc4 edx: 00000004
> esi: c02f6cc4 edi: c02f6c14 ebp: c02f6c14 esp: c10fff24
> ds: 0018 es: 0018 ss: 0018
> Process swapper (pid: 1, stackpage=c10ff000)
> Stack: c01b4308 c02f6cc4 c02f6c14 00000001 0c2f6cc4 c02f6cc4 00000001 000000a1
> c02f6c14 c01c3b60 c02f6cc4 0000000c 00000418 0000000f 00000246 00000000
> 46000005 00000000 c02787a0 c4f7f000 00000001 c02f67c0 c02f6c14 0008e000
> Call Trace: [<c01b4308>] [<c01c3b60>] [<c01c4621>] [<c01a6d74>] [<c0105000>]
> [<c0105077>] [<c0107166>] [<c0105070>]
>
> Code: Bad EIP value.
> <0>Kernel panic: Attempted to kill init!
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [d-kernel] Неполучается поднять kernel версии 2.4.22-std-up-alt15 на машине с SIS 5511/2/3
2004-02-16 8:55 ` Alexey Kotovich
@ 2004-02-16 9:17 ` Anton Farygin
2004-02-16 12:12 ` Aleksey Avdeev
0 siblings, 1 reply; 12+ messages in thread
From: Anton Farygin @ 2004-02-16 9:17 UTC (permalink / raw)
To: Alexey Kotovich, ALT Linux kernel packages development
On Mon, Feb 16, 2004 at 10:55:17AM +0200, Alexey Kotovich wrote:
> re!
>
> Aleksey Avdeev wrote:
> > Не получается у меня поставить ядро 2.4.22-std-up-alt15 на
> > свой домашний старый пень (на чипсете SIS 5511/2/3).
> >
> > Судя по логу - проблемы с поднятием IDE (файл serial.txt в
> > аттаче). Помогите пожалуйста.
> >
> > PS: Для сравнения посылаю сообщения ядра 2.4.20-alt7-up, под
> > которым сейчас и живу (файл dmesg.gz в аттаче). Приношу извинения
> > за размер письма.
>
> попробуй отключить CONFIG_BLK_DEV_IDEPNP (PNP EIDE support), если
> таковой имеется в kernel-2.4.22.
Если получится, обязательно скажите.
Rgds,
Rider
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [d-kernel] Неполучается поднять kernel версии 2.4.22-std-up-alt15 на машине с SIS 5511/2/3
2004-02-16 9:17 ` Anton Farygin
@ 2004-02-16 12:12 ` Aleksey Avdeev
2004-02-16 15:34 ` Aleksey Avdeev
0 siblings, 1 reply; 12+ messages in thread
From: Aleksey Avdeev @ 2004-02-16 12:12 UTC (permalink / raw)
To: ALT Linux kernel packages development
[-- Attachment #1: Type: text/plain, Size: 1201 bytes --]
Anton Farygin пишет:
> On Mon, Feb 16, 2004 at 10:55:17AM +0200, Alexey Kotovich wrote:
>
>>re!
>>
>>Aleksey Avdeev wrote:
>>
>>> Не получается у меня поставить ядро 2.4.22-std-up-alt15 на
>>>свой домашний старый пень (на чипсете SIS 5511/2/3).
>>>
>>> Судя по логу - проблемы с поднятием IDE (файл serial.txt в
>>>аттаче). Помогите пожалуйста.
>>>
>>>PS: Для сравнения посылаю сообщения ядра 2.4.20-alt7-up, под
>>>которым сейчас и живу (файл dmesg.gz в аттаче). Приношу извинения
>>>за размер письма.
>>
>>попробуй отключить CONFIG_BLK_DEV_IDEPNP (PNP EIDE support), если
>>таковой имеется в kernel-2.4.22.
Такого кажется нет: fgrep нашёл только "ISA-PNP EIDE support"
и CONFIG_BLK_DEV_ISAPNP ему соответствующий. (Не установлен.)
Из существенного (кроме отсутствующей аппаратуры) отключил
ещё CONFIG_LDM_PARTITION (т. к. возникло смутное чувство, что
ядро партиций не видет).
>
> Если получится, обязательно скажите.
Запустил компиляцию. Вечером унесу домой и проверю (если
время будет).
PS: Посылаю config-2.4.22-std-up применяемый для сборки.
PPS: В качестве исходного (спек + config-2.4.22-std-up)
kernel-image-std-up-2.4.22-alt17.src.rpm
--
С уважением. Алексей.
[-- Attachment #2: config-2.4.22-std-up --]
[-- Type: text/plain, Size: 33597 bytes --]
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
# CONFIG_SBUS is not set
CONFIG_UID16=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
#
# Processor type and features
#
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
CONFIG_M586TSC=y
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_USE_STRING_486=y
CONFIG_X86_ALIGNMENT_16=y
CONFIG_X86_HAS_TSC=y
CONFIG_X86_PPRO_FENCE=y
# CONFIG_X86_F00F_WORKS_OK is not set
CONFIG_X86_MCE=y
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_HIGHMEM is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_MTRR is not set
# CONFIG_SMP is not set
# CONFIG_X86_UP_APIC is not set
# CONFIG_X86_UP_IOAPIC is not set
# CONFIG_X86_TSC_DISABLE is not set
CONFIG_X86_TSC=y
#
# General setup
#
CONFIG_NET=y
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_ISA=y
CONFIG_PCI_NAMES=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
CONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
# CONFIG_HOTPLUG_PCI_ACPI is not set
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_ELF_AOUT=y
CONFIG_BINFMT_MISC=m
CONFIG_PM=y
CONFIG_APM=m
CONFIG_APM_IGNORE_USER_SUSPEND=y
CONFIG_APM_DO_ENABLE=y
CONFIG_APM_CPU_IDLE=y
# CONFIG_APM_DISPLAY_BLANK is not set
CONFIG_APM_RTC_IS_GMT=y
CONFIG_APM_ALLOW_INTS=y
CONFIG_APM_REAL_MODE_POWER_OFF=y
#
# ACPI Support
#
CONFIG_ACPI=y
CONFIG_ACPI_INITRD=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_BUS=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_ASUS=m
CONFIG_ACPI_TOSHIBA=m
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_RELAXED_AML=y
#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_PARTITIONS=m
CONFIG_MTD_CONCAT=m
CONFIG_MTD_REDBOOT_PARTS=m
# CONFIG_MTD_CMDLINE_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
# CONFIG_NFTL_RW is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_CFI_B1=y
CONFIG_MTD_CFI_B2=y
CONFIG_MTD_CFI_B4=y
CONFIG_MTD_CFI_B8=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_CFI_I4=y
CONFIG_MTD_CFI_I8=y
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
CONFIG_MTD_OBSOLETE_CHIPS=y
CONFIG_MTD_AMDSTD=m
CONFIG_MTD_SHARP=m
CONFIG_MTD_JEDEC=m
#
# Mapping drivers for chip access
#
CONFIG_MTD_PHYSMAP=m
CONFIG_MTD_PHYSMAP_START=8000000
CONFIG_MTD_PHYSMAP_LEN=4000000
CONFIG_MTD_PHYSMAP_BUSWIDTH=2
CONFIG_MTD_PNC2000=m
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_SBC_GXX=m
CONFIG_MTD_ELAN_104NC=m
CONFIG_MTD_DILNETPC=m
CONFIG_MTD_DILNETPC_BOOTSIZE=80000
CONFIG_MTD_MIXMEM=m
CONFIG_MTD_OCTAGON=m
CONFIG_MTD_VMAX=m
CONFIG_MTD_SCx200_DOCFLASH=m
CONFIG_MTD_L440GX=m
CONFIG_MTD_AMD76XROM=m
CONFIG_MTD_ICH2ROM=m
CONFIG_MTD_NETtel=m
CONFIG_MTD_SCB2_FLASH=m
CONFIG_MTD_PCI=m
# CONFIG_MTD_PCMCIA is not set
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
CONFIG_MTD_SLRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLKMTD=m
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOC1000=m
CONFIG_MTD_DOC2000=m
CONFIG_MTD_DOC2001=m
CONFIG_MTD_DOCPROBE=m
CONFIG_MTD_DOCPROBE_ADVANCED=y
CONFIG_MTD_DOCPROBE_ADDRESS=0000
CONFIG_MTD_DOCPROBE_HIGH=y
CONFIG_MTD_DOCPROBE_55AA=y
#
# NAND Flash Device Drivers
#
CONFIG_MTD_NAND=m
CONFIG_MTD_NAND_VERIFY_WRITE=y
CONFIG_MTD_NAND_IDS=m
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_CML1=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_AMIGA is not set
# CONFIG_PARPORT_MFC3 is not set
# CONFIG_PARPORT_ATARI is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_SUNBPP is not set
# CONFIG_PARPORT_OTHER is not set
# CONFIG_PARPORT_1284 is not set
#
# Plug and Play configuration
#
CONFIG_PNP=y
CONFIG_ISAPNP=m
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
CONFIG_PARIDE=m
CONFIG_PARIDE_PARPORT=m
#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_BPCK6=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
CONFIG_PARIDE_EPATC8=y
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_ENBD=m
CONFIG_BLK_DEV_ENBD_IOCTL=m
CONFIG_BLK_DEV_ENBD_BUFFERWR=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_BLK_STATS=y
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID5=m
CONFIG_MD_MULTIPATH=m
CONFIG_BLK_DEV_LVM=m
#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_FILTER=y
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_NAT=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_TOS=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
CONFIG_SYN_COOKIES=y
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_UNCLEAN=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_MIRROR=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_NAT_AMANDA=m
# CONFIG_IP_NF_NAT_LOCAL is not set
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_IP_NF_COMPAT_IPCHAINS=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_COMPAT_IPFWADM=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IPV6=m
#
# IPv6: Netfilter Configuration
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AHESP=m
CONFIG_IP6_NF_MATCH_LENGTH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
CONFIG_KHTTPD=m
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_VLAN_8021Q=m
#
# Cryptography support (CryptoAPI)
#
CONFIG_CRYPTOAPI=m
CONFIG_CIPHERS=y
#
# 128 bit blocksize
#
CONFIG_CIPHER_AES=m
CONFIG_CIPHER_MARS=m
CONFIG_CIPHER_RC6=m
CONFIG_CIPHER_SERPENT=m
CONFIG_CIPHER_TWOFISH=m
CONFIG_CIPHER_WICKER=m
CONFIG_CIPHER_NUSH=m
#
# 64 bit blocksize
#
CONFIG_CIPHER_3DES=m
CONFIG_CIPHER_BLOWFISH=m
CONFIG_CIPHER_CAST5=m
CONFIG_CIPHER_GOST=m
CONFIG_CIPHER_IDEA=m
CONFIG_CIPHER_RC5=m
#
# Deprecated
#
CONFIG_CIPHER_NULL=m
CONFIG_CIPHER_DES=m
CONFIG_CIPHER_DFC=m
CONFIG_CIPHER_BLOWFISH_OLD=m
CONFIG_DIGESTS=y
CONFIG_DIGEST_MD5=m
CONFIG_DIGEST_SHA1=m
CONFIG_DIGEST_RIPEMD160=m
CONFIG_DIGEST_SHA256=m
CONFIG_DIGEST_SHA384=m
CONFIG_DIGEST_SHA512=m
CONFIG_CRYPTODEV=y
CONFIG_CRYPTOLOOP=m
CONFIG_CRYPTOLOOP_ATOMIC=y
# CONFIG_CRYPTOLOOP_IV_HACK is not set
# CONFIG_CRYPTOLOOP_DEBUG is not set
CONFIG_IPSEC_TUNNEL=m
#
#
#
CONFIG_IPX=m
CONFIG_IPX_INTERN=y
CONFIG_ATALK=m
#
# Appletalk devices
#
# CONFIG_DEV_APPLETALK is not set
CONFIG_DECNET=m
# CONFIG_DECNET_SIOCGIFCONF is not set
# CONFIG_DECNET_ROUTER is not set
CONFIG_BRIDGE=m
CONFIG_X25=m
CONFIG_LAPB=m
# CONFIG_LLC is not set
CONFIG_NET_DIVERT=y
CONFIG_ECONET=m
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
CONFIG_WAN_ROUTER=m
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_CSZ=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_QOS=y
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_CLS=y
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_POLICE=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_IPSEC=m
#
# IPSec options (FreeS/WAN)
#
CONFIG_IPSEC_IPIP=y
CONFIG_IPSEC_AH=y
CONFIG_IPSEC_AUTH_HMAC_MD5=y
CONFIG_IPSEC_AUTH_HMAC_SHA1=y
CONFIG_IPSEC_ESP=y
CONFIG_IPSEC_ENC_3DES=y
CONFIG_IPSEC_IPCOMP=y
CONFIG_IPSEC_DEBUG=y
#
# Telephony Support
#
CONFIG_PHONE=m
CONFIG_PHONE_IXJ=m
# CONFIG_PHONE_IXJ_PCMCIA is not set
#
# ATA/IDE/MFM/RLL support
#
CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEFLOPPY=m
CONFIG_BLK_DEV_IDESCSI=m
CONFIG_IDE_TASK_IOCTL=y
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_ISAPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_OFFBOARD=y
CONFIG_BLK_DEV_IDEDMA_FORCED=y
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_PCI_WIP=y
CONFIG_BLK_DEV_ADMA100=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_WDC_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_AMD74XX_OVERRIDE is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_HPT34X_AUTODMA is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_PDC202XX_BURST is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
CONFIG_BLK_DEV_SIS5513=y
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_IDEDMA_AUTO=y
CONFIG_IDEDMA_IVB=y
# CONFIG_DMA_NONPCI is not set
CONFIG_BLK_DEV_IDE_MODES=y
# CONFIG_BLK_DEV_ATARAID is not set
# CONFIG_BLK_DEV_ATARAID_PDC is not set
# CONFIG_BLK_DEV_ATARAID_HPT is not set
# CONFIG_BLK_DEV_ATARAID_SII is not set
# CONFIG_BLK_DEV_ATARAID_ISW is not set
#
# SCSI support
#
CONFIG_SCSI=m
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_SD_EXTRA_DEVS=40
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_SR_EXTRA_DEVS=4
CONFIG_CHR_DEV_SG=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_DEBUG_QUEUES is not set
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
#
# SCSI low-level drivers
#
CONFIG_BLK_DEV_3W_XXXX_RAID=m
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_MEGARAID2 is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SIL is not set
# CONFIG_SCSI_SATA_VIA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
CONFIG_SCSI_EATA=m
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_EATA_DMA=m
CONFIG_SCSI_EATA_PIO=m
CONFIG_SCSI_FUTURE_DOMAIN=m
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_NCR53C8XX is not set
# CONFIG_SCSI_SYM53C8XX is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
CONFIG_SCSI_DEBUG=m
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_BOOT is not set
# CONFIG_FUSION_ISENSE is not set
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LAN is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
CONFIG_I2O=m
CONFIG_I2O_PCI=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_LAN=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
#
# Network device support
#
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_ETHERTAP=m
CONFIG_NET_SB1000=m
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_SUNLANCE is not set
CONFIG_HAPPYMEAL=m
# CONFIG_SUNBMAC is not set
# CONFIG_SUNQE is not set
CONFIG_SUNGEM=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL1=m
CONFIG_EL2=m
CONFIG_ELPLUS=m
CONFIG_EL16=m
CONFIG_EL3=m
CONFIG_3C515=m
# CONFIG_ELMC is not set
# CONFIG_ELMC_II is not set
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_LANCE=m
CONFIG_NET_VENDOR_SMC=y
CONFIG_WD80x3=m
# CONFIG_ULTRAMCA is not set
CONFIG_ULTRA=m
# CONFIG_ULTRA32 is not set
CONFIG_SMC9194=m
CONFIG_NET_VENDOR_RACAL=y
CONFIG_NI5010=m
CONFIG_NI52=m
CONFIG_NI65=m
CONFIG_AT1700=m
CONFIG_DEPCA=m
CONFIG_HP100=m
CONFIG_NET_ISA=y
CONFIG_E2100=m
CONFIG_EWRK3=m
CONFIG_EEXPRESS=m
CONFIG_EEXPRESS_PRO=m
CONFIG_HPLAN_PLUS=m
CONFIG_HPLAN=m
CONFIG_LP486E=m
CONFIG_ETH16I=m
CONFIG_NE2000=m
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
CONFIG_PCNET32_OLD=m
CONFIG_AMD8111_ETH=m
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_AC3200=m
CONFIG_APRICOT=m
CONFIG_B44=m
CONFIG_CS89x0=m
CONFIG_TULIP=m
CONFIG_TULIP_MWI=y
CONFIG_TULIP_MMIO=y
CONFIG_DE4X5=m
CONFIG_DGRS=m
CONFIG_DM9102=m
CONFIG_EEPRO100=m
# CONFIG_EEPRO100_PIO is not set
CONFIG_E100=m
# CONFIG_LNE390 is not set
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
# CONFIG_NE3210 is not set
# CONFIG_ES3210 is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_SIS900=m
CONFIG_EPIC100=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_TLAN=m
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
CONFIG_WINBOND_840=m
CONFIG_NET_POCKET=y
CONFIG_ATP=m
CONFIG_DE600=m
CONFIG_DE620=m
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_MYRI_SBUS is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
# CONFIG_PPPOATM is not set
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
CONFIG_NET_FC=y
CONFIG_IPHASE5526=m
CONFIG_RCPCI=m
CONFIG_SHAPER=m
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# ATM drivers
#
# CONFIG_ATM_TCP is not set
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_FIRESTREAM is not set
# CONFIG_ATM_ZATM is not set
# CONFIG_ATM_NICSTAR is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_AMBASSADOR is not set
# CONFIG_ATM_HORIZON is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E_MAYBE is not set
# CONFIG_ATM_HE is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
CONFIG_IRDA=m
#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
CONFIG_IRPORT_SIR=m
#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_LITELINK_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m
CONFIG_MA600_DONGLE=m
#
# FIR device drivers
#
# CONFIG_USB_IRDA is not set
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_TOSHIBA_OLD=m
CONFIG_TOSHIBA_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
#
# ISDN subsystem
#
CONFIG_ISDN=m
CONFIG_ISDN_BOOL=y
CONFIG_ISDN_PPP=y
CONFIG_IPPP_FILTER=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_ISDN_PPP_BSDCOMP=m
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
# CONFIG_ISDN_X25 is not set
#
# ISDN feature submodules
#
CONFIG_ISDN_DRV_LOOP=m
CONFIG_ISDN_DIVERSION=m
#
# low-level hardware drivers
#
#
# Passive ISDN cards
#
# CONFIG_ISDN_DRV_HISAX is not set
#
# Active ISDN cards
#
# CONFIG_ISDN_DRV_ICN is not set
# CONFIG_ISDN_DRV_PCBIT is not set
# CONFIG_ISDN_DRV_SC is not set
# CONFIG_ISDN_DRV_ACT2000 is not set
# CONFIG_ISDN_DRV_EICON is not set
# CONFIG_ISDN_DRV_TPAM is not set
# CONFIG_ISDN_CAPI is not set
# CONFIG_HYSDN is not set
# CONFIG_HYSDN_CAPI is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Input core support
#
CONFIG_INPUT=m
CONFIG_INPUT_KEYBDEV=m
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
CONFIG_SERIAL_EXTENDED=y
CONFIG_SERIAL_MANY_PORTS=y
CONFIG_SERIAL_SHARE_IRQ=y
# CONFIG_SERIAL_DETECT_IRQ is not set
CONFIG_SERIAL_MULTIPORT=y
CONFIG_HUB6=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=m
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
CONFIG_CYZ_INTR=y
CONFIG_DIGIEPCA=m
CONFIG_ESPSERIAL=m
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
CONFIG_ISI=m
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_N_HDLC=m
CONFIG_RISCOM8=m
CONFIG_SPECIALIX=m
CONFIG_SPECIALIX_RTSCTS=y
CONFIG_SX=m
CONFIG_RIO=m
# CONFIG_RIO_OLDPCI is not set
CONFIG_STALDRV=y
CONFIG_STALLION=m
CONFIG_ISTALLION=m
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_TIPAR=m
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_PHILIPSPAR=m
CONFIG_I2C_ELV=m
CONFIG_I2C_VELLEMAN=m
CONFIG_I2C_PPORT=m
# CONFIG_SCx200_I2C is not set
CONFIG_SCx200_ACB=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ELEKTOR=m
CONFIG_I2C_PCFEPP=m
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_PROC=m
#
# Mice
#
CONFIG_BUSMOUSE=m
CONFIG_ATIXL_BUSMOUSE=m
CONFIG_LOGIBUSMOUSE=m
CONFIG_MS_BUSMOUSE=m
CONFIG_MOUSE=m
CONFIG_PSMOUSE=y
CONFIG_82C710_MOUSE=m
CONFIG_PC110_PAD=m
CONFIG_MK712_MOUSE=m
#
# Joysticks
#
CONFIG_INPUT_GAMEPORT=m
CONFIG_INPUT_NS558=m
CONFIG_INPUT_LIGHTNING=m
CONFIG_INPUT_PCIGAME=m
CONFIG_INPUT_CS461X=m
CONFIG_INPUT_EMU10K1=m
CONFIG_INPUT_SERIO=m
CONFIG_INPUT_SERPORT=m
#
# Joysticks
#
CONFIG_INPUT_ANALOG=m
CONFIG_INPUT_A3D=m
CONFIG_INPUT_ADI=m
CONFIG_INPUT_COBRA=m
CONFIG_INPUT_GF2K=m
CONFIG_INPUT_GRIP=m
CONFIG_INPUT_INTERACT=m
CONFIG_INPUT_TMDC=m
CONFIG_INPUT_SIDEWINDER=m
# CONFIG_INPUT_IFORCE_USB is not set
CONFIG_INPUT_IFORCE_232=m
CONFIG_INPUT_WARRIOR=m
CONFIG_INPUT_MAGELLAN=m
CONFIG_INPUT_SPACEORB=m
CONFIG_INPUT_SPACEBALL=m
CONFIG_INPUT_STINGER=m
CONFIG_INPUT_DB9=m
CONFIG_INPUT_GAMECON=m
CONFIG_INPUT_TURBOGRAFX=m
CONFIG_QIC02_TAPE=m
CONFIG_QIC02_DYNCONF=y
#
# Setting runtime QIC-02 configuration is done with qic02conf
#
#
# from the tpqic02-support package. It is available at
#
#
# metalab.unc.edu or ftp://titus.cfw.com/pub/Linux/util/
#
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_KCS=m
CONFIG_IPMI_WATCHDOG=m
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_SCx200_GPIO is not set
# CONFIG_AMD_RNG is not set
# CONFIG_INTEL_RNG is not set
# CONFIG_AMD_PM768 is not set
CONFIG_NVRAM=m
CONFIG_RTC=m
CONFIG_DTLK=m
CONFIG_R3964=m
CONFIG_APPLICOM=m
CONFIG_SONYPI=m
#
# Ftape, the floppy tape device driver
#
CONFIG_FTAPE=m
CONFIG_ZFTAPE=m
CONFIG_ZFT_DFLT_BLK_SZ=10240
#
# The compressor will be built as a module only!
#
CONFIG_ZFT_COMPRESSOR=m
CONFIG_FT_NR_BUFFERS=3
CONFIG_FT_PROC_FS=y
# CONFIG_FT_NORMAL_DEBUG is not set
# CONFIG_FT_FULL_DEBUG is not set
# CONFIG_FT_NO_TRACE is not set
CONFIG_FT_NO_TRACE_AT_ALL=y
#
# Hardware configuration
#
CONFIG_FT_STD_FDC=y
# CONFIG_FT_MACH2 is not set
# CONFIG_FT_PROBE_FC10 is not set
# CONFIG_FT_ALT_FDC is not set
CONFIG_FT_FDC_THR=8
CONFIG_FT_FDC_MAX_RATE=2000
CONFIG_FT_ALPHA_CLOCK=0
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
#
# Video For Linux
#
CONFIG_VIDEO_PROC_FS=y
CONFIG_I2C_PARPORT=m
#
# Video Adapters
#
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_ZORAN_BUZ is not set
# CONFIG_VIDEO_ZORAN_DC10 is not set
# CONFIG_VIDEO_ZORAN_LML33 is not set
# CONFIG_VIDEO_ZR36120 is not set
# CONFIG_VIDEO_MEYE is not set
#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_MIROPCM20 is not set
# CONFIG_RADIO_MIROPCM20_RDS is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_SF16FMR2 is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set
#
# File systems
#
CONFIG_QUOTA=y
CONFIG_QFMT_V2=m
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EXT3_FS=m
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_UMSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_EFS_FS=m
CONFIG_JFFS_FS=m
CONFIG_JFFS_FS_VERBOSE=0
CONFIG_JFFS_PROC_FS=y
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_CRAMFS=m
CONFIG_TMPFS=y
CONFIG_RAMFS=y
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_JFS_FS=m
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_MINIX_FS=m
CONFIG_VXFS_FS=m
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
CONFIG_HPFS_FS=m
CONFIG_PROC_FS=y
CONFIG_PROC_CONFIG=m
CONFIG_PROC_CONFIG_GZ=y
# CONFIG_PROC_CONFIG_BZ2 is not set
# CONFIG_PROC_CONFIG_NONE is not set
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
CONFIG_QNX4FS_FS=m
# CONFIG_QNX4FS_RW is not set
CONFIG_ROMFS_FS=y
CONFIG_EXT2_FS=m
CONFIG_SYSV_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_RW=y
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
CONFIG_XFS_FS=m
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_DMAPI=y
# CONFIG_XFS_TRACE is not set
# CONFIG_XFS_DEBUG is not set
#
# Network File Systems
#
CONFIG_CODA_FS=m
CONFIG_INTERMEZZO_FS=m
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_ROOT_NFS is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
CONFIG_NFSD_TCP=y
CONFIG_SUNRPC=m
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp866"
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_ZISOFS_FS=m
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
CONFIG_SMB_NLS=y
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_DEFAULT="koi8-r"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
CONFIG_VIDEO_SELECT=y
CONFIG_MDA_CONSOLE=m
#
# Frame-buffer support
#
CONFIG_FB=y
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FB_RIVA is not set
CONFIG_FB_CLGEN=y
# CONFIG_FB_PM2 is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_VESA is not set
CONFIG_FB_VGA16=m
CONFIG_FB_HGA=m
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_MATROX is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
CONFIG_FB_VIRTUAL=m
# CONFIG_FBCON_SPLASHSCREEN is not set
CONFIG_FBCON_ADVANCED=y
CONFIG_FBCON_MFB=m
CONFIG_FBCON_CFB2=m
CONFIG_FBCON_CFB4=m
CONFIG_FBCON_CFB8=y
CONFIG_FBCON_CFB16=y
CONFIG_FBCON_CFB24=m
CONFIG_FBCON_CFB32=m
# CONFIG_FBCON_AFB is not set
# CONFIG_FBCON_ILBM is not set
# CONFIG_FBCON_IPLAN2P2 is not set
# CONFIG_FBCON_IPLAN2P4 is not set
# CONFIG_FBCON_IPLAN2P8 is not set
# CONFIG_FBCON_MAC is not set
# CONFIG_FBCON_VGA_PLANES is not set
CONFIG_FBCON_VGA=m
# CONFIG_FBCON_HGA is not set
CONFIG_FBCON_FONTWIDTH8_ONLY=y
# CONFIG_FBCON_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Sound
#
CONFIG_SOUND=m
# CONFIG_SOUND_ALI5455 is not set
# CONFIG_SOUND_BT878 is not set
# CONFIG_SOUND_CMPCI is not set
CONFIG_SOUND_EMU10K1=m
CONFIG_MIDI_EMU10K1=y
# CONFIG_SOUND_FUSION is not set
# CONFIG_SOUND_CS4281 is not set
CONFIG_SOUND_ES1370=m
CONFIG_SOUND_ES1371=m
CONFIG_SOUND_ESSSOLO1=m
CONFIG_SOUND_MAESTRO=m
CONFIG_SOUND_MAESTRO3=m
CONFIG_SOUND_FORTE=m
# CONFIG_SOUND_ICH is not set
# CONFIG_SOUND_RME96XX is not set
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_TRIDENT is not set
CONFIG_SOUND_MSNDCLAS=m
# CONFIG_MSNDCLAS_HAVE_BOOT is not set
CONFIG_MSNDCLAS_INIT_FILE="/etc/sound/msndinit.bin"
CONFIG_MSNDCLAS_PERM_FILE="/etc/sound/msndperm.bin"
CONFIG_SOUND_MSNDPIN=m
# CONFIG_MSNDPIN_HAVE_BOOT is not set
CONFIG_MSNDPIN_INIT_FILE="/etc/sound/pndspini.bin"
CONFIG_MSNDPIN_PERM_FILE="/etc/sound/pndsperm.bin"
# CONFIG_SOUND_VIA82CXXX is not set
# CONFIG_MIDI_VIA82CXXX is not set
CONFIG_SOUND_OSS=m
CONFIG_SOUND_TRACEINIT=y
CONFIG_SOUND_DMAP=y
# CONFIG_SOUND_AD1816 is not set
# CONFIG_SOUND_AD1889 is not set
# CONFIG_SOUND_SGALAXY is not set
# CONFIG_SOUND_ADLIB is not set
# CONFIG_SOUND_ACI_MIXER is not set
# CONFIG_SOUND_CS4232 is not set
CONFIG_SOUND_SSCAPE=m
# CONFIG_SOUND_GUS is not set
CONFIG_SOUND_VMIDI=m
CONFIG_SOUND_TRIX=m
CONFIG_SOUND_MSS=m
CONFIG_SOUND_MPU401=m
# CONFIG_SOUND_NM256 is not set
# CONFIG_SOUND_MAD16 is not set
# CONFIG_SOUND_PAS is not set
# CONFIG_PAS_JOYSTICK is not set
CONFIG_SOUND_PSS=m
CONFIG_PSS_MIXER=y
# CONFIG_PSS_HAVE_BOOT is not set
CONFIG_SOUND_SB=m
CONFIG_SOUND_AWE32_SYNTH=m
CONFIG_SOUND_KAHLUA=m
CONFIG_SOUND_WAVEFRONT=m
CONFIG_SOUND_MAUI=m
# CONFIG_SOUND_YM3812 is not set
# CONFIG_SOUND_OPL3SA1 is not set
# CONFIG_SOUND_OPL3SA2 is not set
# CONFIG_SOUND_YMFPCI is not set
# CONFIG_SOUND_YMFPCI_LEGACY is not set
CONFIG_SOUND_UART6850=m
# CONFIG_SOUND_AEDSP16 is not set
# CONFIG_SOUND_TVMIXER is not set
#
# USB support
#
# CONFIG_USB is not set
#
# Bluetooth support
#
# CONFIG_BLUEZ is not set
#
# Security options
#
CONFIG_HARDEN_STACK=y
CONFIG_HARDEN_STACK_SMART=y
CONFIG_HARDEN_LINK=y
CONFIG_HARDEN_FIFO=y
CONFIG_HARDEN_PROC=y
CONFIG_HARDEN_RLIMIT_NPROC=y
CONFIG_HARDEN_SHM=y
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_IOVIRT is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_FRAME_POINTER is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Library routines
#
CONFIG_CRC32=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [d-kernel] Неполучается поднять kernel версии 2.4.22-std-up-alt15 на машине с SIS 5511/2/3
2004-02-16 12:12 ` Aleksey Avdeev
@ 2004-02-16 15:34 ` Aleksey Avdeev
0 siblings, 0 replies; 12+ messages in thread
From: Aleksey Avdeev @ 2004-02-16 15:34 UTC (permalink / raw)
To: ALT Linux kernel packages development
Aleksey Avdeev пишет:
> Anton Farygin пишет:
>
>> On Mon, Feb 16, 2004 at 10:55:17AM +0200, Alexey Kotovich wrote:
>>
>>> re!
>>>
>>> Aleksey Avdeev wrote:
>>>
>>>> Не получается у меня поставить ядро 2.4.22-std-up-alt15 на свой
>>>> домашний старый пень (на чипсете SIS 5511/2/3).
>>>>
>>>> Судя по логу - проблемы с поднятием IDE (файл serial.txt в аттаче).
>>>> Помогите пожалуйста.
>>>>
>>>> PS: Для сравнения посылаю сообщения ядра 2.4.20-alt7-up, под которым
>>>> сейчас и живу (файл dmesg.gz в аттаче). Приношу извинения за размер
>>>> письма.
>>>
>>>
>>> попробуй отключить CONFIG_BLK_DEV_IDEPNP (PNP EIDE support), если
>>> таковой имеется в kernel-2.4.22.
>
>
> Такого кажется нет: fgrep нашёл только "ISA-PNP EIDE support" и
> CONFIG_BLK_DEV_ISAPNP ему соответствующий. (Не установлен.)
>
> Из существенного (кроме отсутствующей аппаратуры) отключил ещё
> CONFIG_LDM_PARTITION (т. к. возникло смутное чувство, что ядро партиций
> не видет).
>
>>
>> Если получится, обязательно скажите.
>
>
> Запустил компиляцию. Вечером унесу домой и проверю (если время будет).
Собрал rpm`ы (gcc-3.3 + от патч vsu@). Приду домой - опробую.
>
> PS: Посылаю config-2.4.22-std-up применяемый для сборки.
>
> PPS: В качестве исходного (спек + config-2.4.22-std-up)
> kernel-image-std-up-2.4.22-alt17.src.rpm
>
--
С уважением. Алексей.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [d-kernel] Неполучается поднять kernel версии 2.4.22-std-up-alt15 на машине с SIS 5511/2/3
2004-02-15 21:23 [d-kernel] Неполучается поднять kernel версии 2.4.22-std-up-alt15 на машине с SIS 5511/2/3 Aleksey Avdeev
2004-02-16 8:55 ` Alexey Kotovich
@ 2004-02-16 12:13 ` Sergey Vlasov
2004-02-16 13:06 ` Aleksey Avdeev
` (2 more replies)
1 sibling, 3 replies; 12+ messages in thread
From: Sergey Vlasov @ 2004-02-16 12:13 UTC (permalink / raw)
To: ALT Linux kernel packages development
[-- Attachment #1: Type: text/plain, Size: 2060 bytes --]
On Mon, Feb 16, 2004 at 12:23:50AM +0300, Aleksey Avdeev wrote:
> Не получается у меня поставить ядро 2.4.22-std-up-alt15 на
> свой домашний старый пень (на чипсете SIS 5511/2/3).
>
> Судя по логу - проблемы с поднятием IDE (файл serial.txt в
> аттаче). Помогите пожалуйста.
[skip]
> Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> SIS5513: IDE controller at PCI slot 00:01.1
> SIS5513: chipset revision 8
> SIS5513: not 100% native mode: will probe irqs later
> SIS5513: SiS551x ATA 16 controller
> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio
> SIS5513: simplex device: DMA disabled
> ide1: SIS5513 Bus-Master DMA disabled (BIOS)
> hda: QUANTUM FIREBALLP AS10.2, ATA DISK drive
> hdc: Maxtor 6E030L0, ATA DISK drive
> Unable to handle kernel NULL pointer dereference at virtual address 00000000
Похоже, эта ситуация должна лечиться патчем:
--- kernel-source-2.4.22/drivers/ide/ide-iops.c.ide-oops 2003-06-13 18:51:33 +0400
+++ kernel-source-2.4.22/drivers/ide/ide-iops.c 2004-02-16 15:06:21 +0300
@@ -908,7 +908,8 @@ int ide_config_drive_speed (ide_drive_t
// ide_delay_50ms();
#if defined(CONFIG_BLK_DEV_IDEDMA) && !defined(CONFIG_DMA_NONPCI)
- hwif->ide_dma_host_off(drive);
+ if (hwif->ide_dma_check)
+ hwif->ide_dma_host_off(drive);
#endif /* (CONFIG_BLK_DEV_IDEDMA) && !(CONFIG_DMA_NONPCI) */
/*
@@ -976,10 +977,12 @@ int ide_config_drive_speed (ide_drive_t
drive->id->dma_1word &= ~0x0F00;
#if defined(CONFIG_BLK_DEV_IDEDMA) && !defined(CONFIG_DMA_NONPCI)
- if (speed >= XFER_SW_DMA_0)
- hwif->ide_dma_host_on(drive);
- else
- hwif->ide_dma_off_quietly(drive);
+ if (hwif->ide_dma_check) {
+ if (speed >= XFER_SW_DMA_0)
+ hwif->ide_dma_host_on(drive);
+ else
+ hwif->ide_dma_off_quietly(drive);
+ }
#endif /* (CONFIG_BLK_DEV_IDEDMA) && !(CONFIG_DMA_NONPCI) */
switch(speed) {
Почему-то это до сих пор сломано - видимо, контроллер слишком
древний и мало у кого встречающийся. Ладно, будем чинить.
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [d-kernel] Неполучается поднять kernel версии 2.4.22-std-up-alt15 на машине с SIS 5511/2/3
2004-02-16 12:13 ` Sergey Vlasov
@ 2004-02-16 13:06 ` Aleksey Avdeev
2004-02-17 8:30 ` Aleksey Avdeev
2004-02-19 8:27 ` Aleksey Avdeev
2 siblings, 0 replies; 12+ messages in thread
From: Aleksey Avdeev @ 2004-02-16 13:06 UTC (permalink / raw)
To: ALT Linux kernel packages development
Sergey Vlasov пишет:
> On Mon, Feb 16, 2004 at 12:23:50AM +0300, Aleksey Avdeev wrote:
>
>> Не получается у меня поставить ядро 2.4.22-std-up-alt15 на
>>свой домашний старый пень (на чипсете SIS 5511/2/3).
>>
>> Судя по логу - проблемы с поднятием IDE (файл serial.txt в
>>аттаче). Помогите пожалуйста.
>
> [skip]
>
>>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
>>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>>SIS5513: IDE controller at PCI slot 00:01.1
>>SIS5513: chipset revision 8
>>SIS5513: not 100% native mode: will probe irqs later
>>SIS5513: SiS551x ATA 16 controller
>> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio
>>SIS5513: simplex device: DMA disabled
>>ide1: SIS5513 Bus-Master DMA disabled (BIOS)
>>hda: QUANTUM FIREBALLP AS10.2, ATA DISK drive
>>hdc: Maxtor 6E030L0, ATA DISK drive
>>Unable to handle kernel NULL pointer dereference at virtual address 00000000
>
>
> Похоже, эта ситуация должна лечиться патчем:
>
> --- kernel-source-2.4.22/drivers/ide/ide-iops.c.ide-oops 2003-06-13 18:51:33 +0400
> +++ kernel-source-2.4.22/drivers/ide/ide-iops.c 2004-02-16 15:06:21 +0300
...
>
> Почему-то это до сих пор сломано - видимо, контроллер слишком
> древний и мало у кого встречающийся. Ладно, будем чинить.
Наложил патч и запустил сборку по новой. Спасибо.
--
С уважением. Алексей.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [d-kernel] Неполучается поднять kernel версии 2.4.22-std-up-alt15 на машине с SIS 5511/2/3
2004-02-16 12:13 ` Sergey Vlasov
2004-02-16 13:06 ` Aleksey Avdeev
@ 2004-02-17 8:30 ` Aleksey Avdeev
2004-02-17 9:58 ` Sergey Vlasov
2004-02-19 8:27 ` Aleksey Avdeev
2 siblings, 1 reply; 12+ messages in thread
From: Aleksey Avdeev @ 2004-02-17 8:30 UTC (permalink / raw)
To: ALT Linux kernel packages development
Sergey Vlasov пишет:
> On Mon, Feb 16, 2004 at 12:23:50AM +0300, Aleksey Avdeev wrote:
>
>> Не получается у меня поставить ядро 2.4.22-std-up-alt15 на
>>свой домашний старый пень (на чипсете SIS 5511/2/3).
>>
>> Судя по логу - проблемы с поднятием IDE (файл serial.txt в
>>аттаче). Помогите пожалуйста.
>
> [skip]
>
>>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
>>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>>SIS5513: IDE controller at PCI slot 00:01.1
>>SIS5513: chipset revision 8
>>SIS5513: not 100% native mode: will probe irqs later
>>SIS5513: SiS551x ATA 16 controller
>> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio
>>SIS5513: simplex device: DMA disabled
>>ide1: SIS5513 Bus-Master DMA disabled (BIOS)
>>hda: QUANTUM FIREBALLP AS10.2, ATA DISK drive
>>hdc: Maxtor 6E030L0, ATA DISK drive
>>Unable to handle kernel NULL pointer dereference at virtual address 00000000
>
>
> Похоже, эта ситуация должна лечиться патчем:
>
> --- kernel-source-2.4.22/drivers/ide/ide-iops.c.ide-oops 2003-06-13 18:51:33 +0400
> +++ kernel-source-2.4.22/drivers/ide/ide-iops.c 2004-02-16 15:06:21 +0300
> @@ -908,7 +908,8 @@ int ide_config_drive_speed (ide_drive_t
> // ide_delay_50ms();
>
> #if defined(CONFIG_BLK_DEV_IDEDMA) && !defined(CONFIG_DMA_NONPCI)
> - hwif->ide_dma_host_off(drive);
> + if (hwif->ide_dma_check)
> + hwif->ide_dma_host_off(drive);
> #endif /* (CONFIG_BLK_DEV_IDEDMA) && !(CONFIG_DMA_NONPCI) */
>
> /*
> @@ -976,10 +977,12 @@ int ide_config_drive_speed (ide_drive_t
> drive->id->dma_1word &= ~0x0F00;
>
> #if defined(CONFIG_BLK_DEV_IDEDMA) && !defined(CONFIG_DMA_NONPCI)
> - if (speed >= XFER_SW_DMA_0)
> - hwif->ide_dma_host_on(drive);
> - else
> - hwif->ide_dma_off_quietly(drive);
> + if (hwif->ide_dma_check) {
> + if (speed >= XFER_SW_DMA_0)
> + hwif->ide_dma_host_on(drive);
> + else
> + hwif->ide_dma_off_quietly(drive);
> + }
> #endif /* (CONFIG_BLK_DEV_IDEDMA) && !(CONFIG_DMA_NONPCI) */
>
> switch(speed) {
>
> Почему-то это до сих пор сломано - видимо, контроллер слишком
> древний и мало у кого встречающийся. Ладно, будем чинить.
Ядро с данным патчем и высланным ранее
(<ttp://altlinux.ru/pipermail/devel-kernel/2004-February/003568.html>)
конфигом _работает_. (Спасибо.) Причем даже, скорее, не
поднялось - а взлетело: не успеваю отслеживать в консоли процесс
загрузки ядра! :-) (Ещё не разу у меня ядра не поднимались так
быстро.)
Осталось только DMA допинать: Незнаю как бороться с "SIS5513
Bus-Master DMA disabled (BIOS)". :-( Наверное можно как-то
обойти... Не пойму только как.
PS: Первый раз пингвина да данной машине увидел.
--
С уважением. Алексей.
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [d-kernel] Неполучается поднять kernel версии 2.4.22-std-up-alt15 на машине с SIS 5511/2/3
2004-02-17 8:30 ` Aleksey Avdeev
@ 2004-02-17 9:58 ` Sergey Vlasov
2004-02-17 10:56 ` Aleksey Avdeev
0 siblings, 1 reply; 12+ messages in thread
From: Sergey Vlasov @ 2004-02-17 9:58 UTC (permalink / raw)
To: ALT Linux kernel packages development
[-- Attachment #1: Type: text/plain, Size: 1511 bytes --]
On Tue, Feb 17, 2004 at 11:30:35AM +0300, Aleksey Avdeev wrote:
> >>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
> >>ide: Assuming 33MHz system bus speed for PIO modes; override with
> >>idebus=xx
> >>SIS5513: IDE controller at PCI slot 00:01.1
> >>SIS5513: chipset revision 8
> >>SIS5513: not 100% native mode: will probe irqs later
> >>SIS5513: SiS551x ATA 16 controller
> >> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio
> >>SIS5513: simplex device: DMA disabled
> >>ide1: SIS5513 Bus-Master DMA disabled (BIOS)
> >>hda: QUANTUM FIREBALLP AS10.2, ATA DISK drive
> >>hdc: Maxtor 6E030L0, ATA DISK drive
> >>Unable to handle kernel NULL pointer dereference at virtual address
> >>00000000
[skip]
> Ядро с данным патчем и высланным ранее
> (<ttp://altlinux.ru/pipermail/devel-kernel/2004-February/003568.html>)
> конфигом _работает_. (Спасибо.) Причем даже, скорее, не
> поднялось - а взлетело: не успеваю отслеживать в консоли процесс
> загрузки ядра! :-) (Ещё не разу у меня ядра не поднимались так
> быстро.)
>
> Осталось только DMA допинать: Незнаю как бороться с "SIS5513
> Bus-Master DMA disabled (BIOS)". :-( Наверное можно как-то
> обойти... Не пойму только как.
С этим сложнее. "simplex device" означает, что оба канала IDE
использую один общий контроллер DMA. Работа с такими устройствами в
драйвере IDE сейчас реализована не полностью (даже в 2.6.x).
Есть вероятность, что с помощью hdparm удастся включить DMA для hda;
для hdc точно не получится.
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [d-kernel] Неполучается поднять kernel версии 2.4.22-std-up-alt15 на машине с SIS 5511/2/3
2004-02-17 9:58 ` Sergey Vlasov
@ 2004-02-17 10:56 ` Aleksey Avdeev
2004-02-19 8:24 ` Aleksey Avdeev
0 siblings, 1 reply; 12+ messages in thread
From: Aleksey Avdeev @ 2004-02-17 10:56 UTC (permalink / raw)
To: ALT Linux kernel packages development
Sergey Vlasov пишет:
> On Tue, Feb 17, 2004 at 11:30:35AM +0300, Aleksey Avdeev wrote:
>
>>>>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
>>>>ide: Assuming 33MHz system bus speed for PIO modes; override with
>>>>idebus=xx
>>>>SIS5513: IDE controller at PCI slot 00:01.1
>>>>SIS5513: chipset revision 8
>>>>SIS5513: not 100% native mode: will probe irqs later
>>>>SIS5513: SiS551x ATA 16 controller
>>>> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio
>>>>SIS5513: simplex device: DMA disabled
>>>>ide1: SIS5513 Bus-Master DMA disabled (BIOS)
>>>>hda: QUANTUM FIREBALLP AS10.2, ATA DISK drive
>>>>hdc: Maxtor 6E030L0, ATA DISK drive
>>>>Unable to handle kernel NULL pointer dereference at virtual address
>>>>00000000
>
> [skip]
>
...
>>
>> Осталось только DMA допинать: Незнаю как бороться с "SIS5513
>>Bus-Master DMA disabled (BIOS)". :-( Наверное можно как-то
>>обойти... Не пойму только как.
>
>
> С этим сложнее. "simplex device" означает, что оба канала IDE
> использую один общий контроллер DMA. Работа с такими устройствами в
> драйвере IDE сейчас реализована не полностью (даже в 2.6.x).
Спасибо за информацию: я таких деталей не знал. (Теперь
понятно, почему в старовиндовые времена неудавалось включить DMA
для обоих каналов.)
>
> Есть вероятность, что с помощью hdparm удастся включить DMA для hda;
> для hdc точно не получится.
Вариант с DMA для hdc и PIO для hda возможен? (Он меня дольше
устроит.)
При экспирементах с hdparm на прошлом ядре, DMA не включался
даже для одного диска (сообщалось о запрете режима в BIOS).
Подобрать нужные параметры загрузки у меня, тогда, не получилось.
Попробую поэксперементировать с чем-то типа:
... idebus=33 ide1=dma ide0=autotune
(Не вижу в документации параметра вида idex=pio.)
--
С уважением. Алексей.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [d-kernel] Неполучается поднять kernel версии 2.4.22-std-up-alt15 на машине с SIS 5511/2/3
2004-02-17 10:56 ` Aleksey Avdeev
@ 2004-02-19 8:24 ` Aleksey Avdeev
0 siblings, 0 replies; 12+ messages in thread
From: Aleksey Avdeev @ 2004-02-19 8:24 UTC (permalink / raw)
To: ALT Linux kernel packages development
Aleksey Avdeev wrote:
> Sergey Vlasov пишет:
>
>> On Tue, Feb 17, 2004 at 11:30:35AM +0300, Aleksey Avdeev wrote:
>>
>>>>> Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
>>>>> ide: Assuming 33MHz system bus speed for PIO modes; override with
>>>>> idebus=xx
>>>>> SIS5513: IDE controller at PCI slot 00:01.1
>>>>> SIS5513: chipset revision 8
>>>>> SIS5513: not 100% native mode: will probe irqs later
>>>>> SIS5513: SiS551x ATA 16 controller
>>>>> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio
>>>>> SIS5513: simplex device: DMA disabled
>>>>> ide1: SIS5513 Bus-Master DMA disabled (BIOS)
>>>>> hda: QUANTUM FIREBALLP AS10.2, ATA DISK drive
>>>>> hdc: Maxtor 6E030L0, ATA DISK drive
>>>>> Unable to handle kernel NULL pointer dereference at virtual address
>>>>> 00000000
>>
>>
>> [skip]
>>
> ...
>
>>>
>>> Осталось только DMA допинать: Незнаю как бороться с "SIS5513
>>> Bus-Master DMA disabled (BIOS)". :-( Наверное можно как-то обойти...
>>> Не пойму только как.
>>
>>
>>
>> С этим сложнее. "simplex device" означает, что оба канала IDE
>> использую один общий контроллер DMA. Работа с такими устройствами в
>> драйвере IDE сейчас реализована не полностью (даже в 2.6.x).
...
>>
>> Есть вероятность, что с помощью hdparm удастся включить DMA для hda;
>> для hdc точно не получится.
>
>
> Вариант с DMA для hdc и PIO для hda возможен? (Он меня дольше устроит.)
>
> При экспирементах с hdparm на прошлом ядре, DMA не включался даже для
> одного диска (сообщалось о запрете режима в BIOS). Подобрать нужные
> параметры загрузки у меня, тогда, не получилось.
>
> Попробую поэксперементировать с чем-то типа:
>
> ... idebus=33 ide1=dma ide0=autotune
Пробовал "idebus=33 ide0=dma ide1=autotune" - не помогло. :-(
Симптомы, теперь, такие: "hdparm -d1 /dev/hda" режим dma
включает и сообщает об этом (раньше - ругался, что запрещено в
BIOS), но при попытках обращения к диску _все_ дисковые операции
прерываются минут на 5 (всё это время - горит светодиод). Вызов
"hdparm /dev/hda" после погасания светодиода показывает
отключение dma.
--
С уважением. Алексей.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [d-kernel] Неполучается поднять kernel версии 2.4.22-std-up-alt15 на машине с SIS 5511/2/3
2004-02-16 12:13 ` Sergey Vlasov
2004-02-16 13:06 ` Aleksey Avdeev
2004-02-17 8:30 ` Aleksey Avdeev
@ 2004-02-19 8:27 ` Aleksey Avdeev
2 siblings, 0 replies; 12+ messages in thread
From: Aleksey Avdeev @ 2004-02-19 8:27 UTC (permalink / raw)
To: ALT Linux kernel packages development
Sergey Vlasov wrote:
> On Mon, Feb 16, 2004 at 12:23:50AM +0300, Aleksey Avdeev wrote:
>
>> Не получается у меня поставить ядро 2.4.22-std-up-alt15 на
>>свой домашний старый пень (на чипсете SIS 5511/2/3).
>>
>> Судя по логу - проблемы с поднятием IDE (файл serial.txt в
>>аттаче). Помогите пожалуйста.
>
...
>
> Похоже, эта ситуация должна лечиться патчем:
>
> --- kernel-source-2.4.22/drivers/ide/ide-iops.c.ide-oops 2003-06-13 18:51:33 +0400
> +++ kernel-source-2.4.22/drivers/ide/ide-iops.c 2004-02-16 15:06:21 +0300
> @@ -908,7 +908,8 @@ int ide_config_drive_speed (ide_drive_t
> // ide_delay_50ms();
>
> #if defined(CONFIG_BLK_DEV_IDEDMA) && !defined(CONFIG_DMA_NONPCI)
> - hwif->ide_dma_host_off(drive);
> + if (hwif->ide_dma_check)
> + hwif->ide_dma_host_off(drive);
> #endif /* (CONFIG_BLK_DEV_IDEDMA) && !(CONFIG_DMA_NONPCI) */
>
> /*
> @@ -976,10 +977,12 @@ int ide_config_drive_speed (ide_drive_t
> drive->id->dma_1word &= ~0x0F00;
>
> #if defined(CONFIG_BLK_DEV_IDEDMA) && !defined(CONFIG_DMA_NONPCI)
> - if (speed >= XFER_SW_DMA_0)
> - hwif->ide_dma_host_on(drive);
> - else
> - hwif->ide_dma_off_quietly(drive);
> + if (hwif->ide_dma_check) {
> + if (speed >= XFER_SW_DMA_0)
> + hwif->ide_dma_host_on(drive);
> + else
> + hwif->ide_dma_off_quietly(drive);
> + }
> #endif /* (CONFIG_BLK_DEV_IDEDMA) && !(CONFIG_DMA_NONPCI) */
>
> switch(speed) {
Есть ли данный патч в виде kernel-fix-drivers-*?
>
> Почему-то это до сих пор сломано - видимо, контроллер слишком
> древний и мало у кого встречающийся. Ладно, будем чинить.
--
С уважением. Алексей.
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2004-02-19 8:27 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-02-15 21:23 [d-kernel] Неполучается поднять kernel версии 2.4.22-std-up-alt15 на машине с SIS 5511/2/3 Aleksey Avdeev
2004-02-16 8:55 ` Alexey Kotovich
2004-02-16 9:17 ` Anton Farygin
2004-02-16 12:12 ` Aleksey Avdeev
2004-02-16 15:34 ` Aleksey Avdeev
2004-02-16 12:13 ` Sergey Vlasov
2004-02-16 13:06 ` Aleksey Avdeev
2004-02-17 8:30 ` Aleksey Avdeev
2004-02-17 9:58 ` Sergey Vlasov
2004-02-17 10:56 ` Aleksey Avdeev
2004-02-19 8:24 ` Aleksey Avdeev
2004-02-19 8:27 ` Aleksey Avdeev
ALT Linux kernel packages development
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/devel-kernel/0 devel-kernel/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 devel-kernel devel-kernel/ http://lore.altlinux.org/devel-kernel \
devel-kernel@altlinux.org devel-kernel@altlinux.ru devel-kernel@altlinux.com
public-inbox-index devel-kernel
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.devel-kernel
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git