[d-kernel] Неполучается поднять kernel версии 2.4.22-std-up-alt15 на машине с SIS 5511/2/3

["Aleksey Avdeev" <solo@solin.spb.ru>]

[-- Attachment #1: Type: text/plain, Size: 412 bytes --]

Здравствуйте, уважаемые.

   Не получается у меня поставить ядро 2.4.22-std-up-alt15 на 
свой домашний старый пень (на чипсете SIS 5511/2/3).

   Судя по логу - проблемы с поднятием IDE (файл serial.txt в 
аттаче). Помогите пожалуйста.

PS: Для сравнения посылаю сообщения ядра 2.4.20-alt7-up, под 
которым сейчас и живу (файл dmesg.gz в аттаче). Приношу извинения 
за размер письма.

-- 

С уважением. Алексей.

[-- Attachment #2: dmesg.gz --]
[-- Type: application/x-compressed, Size: 3527 bytes --]

[-- Attachment #3: serial.txt --]
[-- Type: text/plain, Size: 3986 bytes --]

Linux version 2.4.22-std-up-alt15 (builder@mash.office.altlinux.ru) (gcc versi
on 2.96 20000731 (ALT Linux, build 2.96-alt6)) #1 Wed Dec 31 10:12:56 MSK 2003
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000005000000 (usable)
 BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
80MB LOWMEM available.
On node 0 totalpages: 20480
zone(0): 4096 pages.
zone(1): 16384 pages.
zone(2): 0 pages.
DMI not present.
Kernel command line: root=/dev/md0 ro pci=biosirq acpi=off noapic console=ttyS0
No local APIC present or hardware disabled
Initializing CPU#0
Detected 132.634 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 264.60 BogoMIPS
Memory: 78292k/81920k available (1193k kernel code, 3240k reserved, 502k data, 1
32k init, 0k highmem)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Intel Pentium with F0 0F bug - workaround enabled.
CPU: Intel Pentium 75 - 200 stepping 0c
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: none
ACPI: Subsystem revision 20031203
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xfda4c, last bus=7
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Using BIOS Interrupt Routing Table
PCI: Using BIOS for IRQ routing
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_I
RQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
PCI: Assigned IRQ 9 for device 00:0e.0
Redundant entry in serial pci_table.  Please send the output of
lspci -vv, this message (12b9,1008,12b9,00ad)
and the manufacturer and name of serial board or modem board
to serial-pci-info@lists.sourceforge.net.
ttyS04 at port 0x4400 (irq = 9) is a 16550A
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 00:01.1
SIS5513: chipset revision 8
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS551x ATA 16 controller
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio
SIS5513: simplex device: DMA disabled
ide1: SIS5513 Bus-Master DMA disabled (BIOS)
hda: QUANTUM FIREBALLP AS10.2, ATA DISK drive
hdc: Maxtor 6E030L0, ATA DISK drive
Unable to handle kernel NULL pointer dereference at virtual address 00000000
 printing eip:
00000000
*pde = 00000000
Oops: 0000
CPU:    0
EIP:    0010:[<00000000>]    Not tainted
EFLAGS: 00010292
eax: 0000000c   ebx: c02f6cc4   ecx: c02f6cc4   edx: 00000004
esi: c02f6cc4   edi: c02f6c14   ebp: c02f6c14   esp: c10fff24
ds: 0018   es: 0018   ss: 0018
Process swapper (pid: 1, stackpage=c10ff000)
Stack: c01b4308 c02f6cc4 c02f6c14 00000001 0c2f6cc4 c02f6cc4 00000001 000000a1
       c02f6c14 c01c3b60 c02f6cc4 0000000c 00000418 0000000f 00000246 00000000
       46000005 00000000 c02787a0 c4f7f000 00000001 c02f67c0 c02f6c14 0008e000
Call Trace:    [<c01b4308>] [<c01c3b60>] [<c01c4621>] [<c01a6d74>] [<c0105000>]
  [<c0105077>] [<c0107166>] [<c0105070>]

Code:  Bad EIP value.
 <0>Kernel panic: Attempted to kill init!