[d-kernel] [PATCH 24/30] arm64: dts: rockchip: Enable HDMI display for rk3588 Cool Pi GenBook

[Anton Midyukov <antohami@altlinux.org>]

From: Andy Yan <andyshrk@163.com>

Enable hdmi display output on Cool Pi GenBook.

Signed-off-by: Andy Yan <andyshrk@163.com>
Link: https://lore.kernel.org/r/20241028123503.384866-4-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
(cherry picked from commit 3fb369c1b43f32b4f52a64b143d2511f89636951)
Signed-off-by: Anton Midyukov <antohami@altlinux.org>
---
 .../rockchip/rk3588-coolpi-cm5-genbook.dts    | 49 +++++++++++++++++++
 1 file changed, 49 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-genbook.dts b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-genbook.dts
index 762d36ad733ab..087ec344623f8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-genbook.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-genbook.dts
@@ -7,6 +7,7 @@
 /dts-v1/;
 
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include "rk3588-coolpi-cm5.dtsi"
 
 / {
@@ -35,6 +36,17 @@ charger: dc-charger {
 		gpios = <&gpio1 RK_PC0 GPIO_ACTIVE_LOW>;
 	};
 
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi0_out_con>;
+			};
+		};
+	};
+
 	leds: leds {
 		compatible = "gpio-leds";
 
@@ -136,6 +148,28 @@ vcc5v0_usb_host0: vcc5v0_usb30_host: vcc5v0-usb-host-regulator {
 	};
 };
 
+/* HDMI CEC is not used */
+&hdmi0 {
+	pinctrl-0 = <&hdmim0_tx0_hpd &hdmim0_tx0_scl &hdmim0_tx0_sda>;
+	status = "okay";
+};
+
+&hdmi0_in {
+	hdmi0_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi0>;
+	};
+};
+
+&hdmi0_out {
+	hdmi0_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdptxphy_hdmi0 {
+	status = "okay";
+};
+
 &i2c4 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -347,3 +381,18 @@ &usb_host1_xhci {
 	dr_mode = "host";
 	status = "okay";
 };
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi0_in_vp0>;
+	};
+};
-- 
2.42.4