* Re: [Comm] Com 2 ethernet @ 2013-04-01 7:29 ` Andrey Liakhovets 2013-04-01 7:53 ` Vladimir Karpinsky 0 siblings, 1 reply; 5+ messages in thread From: Andrey Liakhovets @ 2013-04-01 7:29 UTC (permalink / raw) To: community On Sat, 30 Mar 2013 00:04:41 +0400 Vladimir Karpinsky wrote: > Здравствуйте! > >Есть адаптер com2ethernet: http://www.digi.com/products/serialservers/digionesp . >К нему есть драйвера для разных Linux'ов, но для Альта нет. Модуль dgrp есть в последних ядрах. В бранче P6 он здесь: kernel-modules-staging-un-test-3.8.5-alt0.M60P.1 Так что можно попробовать в исходниках с сайта отключить сборку всего ядерного и собирать только демоны/утилиты, а драйвер взять готовый. Андрей Ляховец >Скачал RedHat'овский src.rpm, пытаюсь собрать. >Установил по требованию kernel-headers и kernael-source. >При сборке получаю ругань: > >make[2]: Entering directory `/usr/src/kernel-source-3.0' > > ERROR: Kernel configuration is invalid. > include/generated/autoconf.h or include/config/auto.conf are missing. > Run 'make oldconfig && make prepare' on kernel src to fix it. > > > WARNING: Symbol version dump /usr/src/kernel-source-3.0/Module.symvers > is missing; modules will have no dependencies and modversions. > > CC [M] /home/karp/RPM/BUILD/dgrp-1.9/driver/build/dgrp_common.o >/home/karp/RPM/BUILD/dgrp-1.9/driver/build/dgrp_common.c:1:0: error: code model 'kernel' not supported in the 32 mode >/home/karp/RPM/BUILD/dgrp-1.9/driver/build/dgrp_common.c:1:0: sorry, unimplemented: 64-bit mode not compiled in >make[3]: *** [/home/karp/RPM/BUILD/dgrp-1.9/driver/build/dgrp_common.o] Error 1 >make[2]: *** [_module_/home/karp/RPM/BUILD/dgrp-1.9/driver/build] Error 2 >make[2]: Leaving directory `/usr/src/kernel-source-3.0' >make[1]: *** [build] Error 2 >make[1]: Leaving directory `/home/karp/RPM/BUILD/dgrp-1.9/driver/2.6.27' >make: *** [build] Error 2 >make: Leaving directory `/home/karp/RPM/BUILD/dgrp-1.9' >ошибка: Неверный код возврата из /home/karp/tmp/rpm-tmp.35866 (%build) > > >Ошибки сборки пакетов: > Неверный код возврата из /home/karp/tmp/rpm-tmp.35866 (%build) > >spec прилагаю. > >Подскажите, пожалуйста, как это можно побороть. > >-- >Vladimir Karpinsky ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Comm] Com 2 ethernet 2013-04-01 7:29 ` [Comm] Com 2 ethernet Andrey Liakhovets @ 2013-04-01 7:53 ` Vladimir Karpinsky 2013-04-01 10:41 ` Andrey Liakhovets 0 siblings, 1 reply; 5+ messages in thread From: Vladimir Karpinsky @ 2013-04-01 7:53 UTC (permalink / raw) To: community Здравствуйте! 01.04.2013 11:29, Andrey Liakhovets пишет: >> >Есть адаптер com2ethernet:http://www.digi.com/products/serialservers/digionesp . >> >К нему есть драйвера для разных Linux'ов, но для Альта нет. > Модуль dgrp есть в последних ядрах. В бранче P6 он здесь: > kernel-modules-staging-un-test-3.8.5-alt0.M60P.1 Правильно ли я понимаю, что мне надо поставить ядро kernel-image-un-test-3.8.5-alt0.M60P.1.i586.rpm (сейчас стоит 3.0.69) и этот модуль? > Так что можно попробовать в исходниках с сайта отключить сборку всего > ядерного и собирать только демоны/утилиты, а драйвер взять готовый. Я немного понимаю в сборке, объясните, пожалуйста, как это сделать. -- С уважением, Владимир. ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Comm] Com 2 ethernet 2013-04-01 7:53 ` Vladimir Karpinsky @ 2013-04-01 10:41 ` Andrey Liakhovets 2013-04-01 16:33 ` Vladimir Karpinsky 0 siblings, 1 reply; 5+ messages in thread From: Andrey Liakhovets @ 2013-04-01 10:41 UTC (permalink / raw) To: community On Mon, 01 Apr 2013 11:53:32 +0400 Vladimir Karpinsky wrote: >Здравствуйте! > >01.04.2013 11:29, Andrey Liakhovets пишет: >>> >Есть адаптер com2ethernet:http://www.digi.com/products/serialservers/digionesp . >>> >К нему есть драйвера для разных Linux'ов, но для Альта нет. >> Модуль dgrp есть в последних ядрах. В бранче P6 он здесь: >> kernel-modules-staging-un-test-3.8.5-alt0.M60P.1 > >Правильно ли я понимаю, что мне надо поставить ядро kernel-image-un-test-3.8.5-alt0.M60P.1.i586.rpm (сейчас стоит 3.0.69) и этот модуль? Да, kernel-image-un-test и kernel-modules-staging-un-test >> Так что можно попробовать в исходниках с сайта отключить сборку всего >> ядерного и собирать только демоны/утилиты, а драйвер взять готовый. > >Я немного понимаю в сборке, объясните, пожалуйста, как это сделать. Не знаю, надо смотреть. Параллельно попробовать спросить в Digi - см. адреса в шапках исходников (т.к. у них везде написано, что макс.ядро - 2.6, а тут драйвер в 3.8). И поискать в других репо/дистрах, где есть уже ядро 3.8, - вдруг там собирают отдельно утилиты к драйверу. Андрей Ляховец ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Comm] Com 2 ethernet 2013-04-01 10:41 ` Andrey Liakhovets @ 2013-04-01 16:33 ` Vladimir Karpinsky 2013-04-01 17:09 ` Michael Shigorin 0 siblings, 1 reply; 5+ messages in thread From: Vladimir Karpinsky @ 2013-04-01 16:33 UTC (permalink / raw) To: community 01.04.2013 14:41, Andrey Liakhovets пишет: > Параллельно попробовать спросить в Digi - см. адреса в шапках исходников > (т.к. у них везде написано, что макс.ядро - 2.6, а тут драйвер в 3.8). Написал, ответили: > We currently do not have driver support for 3.x Linux kernels. However, driver development is underway and we anticipate a release soon. We recommend contacting your Digi Sales Representative in order to obtain an estimated release date. Ещё бы вспомнить кто такой "Digi Sales Representative", поскольку покупалось давно... -- С уважением, Владимир. ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Comm] Com 2 ethernet 2013-04-01 16:33 ` Vladimir Karpinsky @ 2013-04-01 17:09 ` Michael Shigorin 0 siblings, 0 replies; 5+ messages in thread From: Michael Shigorin @ 2013-04-01 17:09 UTC (permalink / raw) To: community On Mon, Apr 01, 2013 at 08:33:27PM +0400, Vladimir Karpinsky wrote: > Написал, ответили: > >We currently do not have driver support for 3.x Linux kernels. > >However, driver development is underway and we anticipate a > >release soon. We recommend contacting your Digi Sales > >Representative in order to obtain an estimated release date. > Ещё бы вспомнить кто такой "Digi Sales Representative", > поскольку покупалось давно... Сильно смахивает на generic otmazka, если драйвер уже в ванилле ;-) -- ---- WBR, Michael Shigorin <mike@altlinux.ru> ------ Linux.Kiev http://www.linux.kiev.ua/ ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2013-04-01 17:09 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2013-04-01 7:29 ` [Comm] Com 2 ethernet Andrey Liakhovets 2013-04-01 7:53 ` Vladimir Karpinsky 2013-04-01 10:41 ` Andrey Liakhovets 2013-04-01 16:33 ` Vladimir Karpinsky 2013-04-01 17:09 ` Michael Shigorin
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git