From: "Владимир Гусев" <vova1971@narod.ru> To: "ALT Linux Community" <community@lists.altlinux.org> Subject: [Comm] Nvidia Geforce FX5200 128 mb + ALC 3.0.4 Date: Sun, 22 Apr 2007 20:43:47 +0400 Message-ID: <op.tq6129dzglg102@post.cnt.ru> (raw) Здравствуйте! Раздобыл такую видеокарту. Внешний вид ее меня немного смутил - какая-то куцая, не сравнить с моим GeForce 4200Ti MSI 64мб. Но все-таки NVidia и более новый чипсет, и видеопамяти больше, подумал я и решил заменить 4200Ti на этот FX5200. Результаты странные.. Вроде все работает, однако с 3D как-то не впечатляет.. оно есть, но на грани фола.. В принципе я знаю, про все первоочередные настройки, связанные с glx, про то, что нужно убрать load dri и т.д. Но это не особо помогало в этот раз.. По сравнению с GeForce 4200Ti MSI 64мб эта карта была чахлой. Я прочитал разные материалы про это.. Даже прописал в modules.conf некоторые параметры, но все тщетно.. [vova@vova vova]$ glxgears 5258 frames in 5.0 seconds = 1051.600 FPS 5592 frames in 5.0 seconds = 1118.400 FPS 5604 frames in 5.0 seconds = 1120.800 FPS 5634 frames in 5.0 seconds = 1126.800 FPS 5630 frames in 5.0 seconds = 1126.000 FPS 5524 frames in 5.0 seconds = 1104.800 FPS Со старым GeForce 4200 у меня тут были гораздо более крупные числа.. [vova@vova vova]$ cat /proc/driver/nvidia/agp/status Status: Enabled Driver: AGPGART AGP Rate: 8x Fast Writes: Enabled SBA: Enabled [vova@vova vova]$ glxinfo |grep render direct rendering: Yes OpenGL renderer string: GeForce FX 5200/AGP/SSE2 [vova@vova vova]$ cat /etc/modules.conf # Local configuration goes here. # To inspect package defined part, see also /etc/modutils.d/ alias char-major-195 nvidia options nvidia NVreg_EnableAGPFW=1 NVreg_EnableAGPSBA=1 alias char-major-81 videodev alias char-major-81-0 saa7134 options tda9887 secam=d port2=0 port1=1 options saa7134 card=35 [root@vova root]# rpm -qa |grep nvidia nvidia_glx_1.0.8776-1.0.8776-alt22 kernel-modules-nvidia-std26-smp-1.0.8776-alt1.132620.11 nvidia-settings-1.0-alt5 nvidia_glx_common-1.0.8776-alt22 nvidia-xconfig-1.0-alt5 kernel-modules-nvidia-std26-smp-1.0.8776-alt1.132624.13 [vova@vova vova]$ cat /etc/X11/xorg.conf # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 1.0 (builder@xeon.office.altlinux.ru) Wed Oct 11 21:28:16 MSD 2006 Section "ServerLayout" Identifier "Default Layout" Screen "Screen at Device0" 0 0 InputDevice "mouse0" "CorePointer" InputDevice "ruwin_ct_sh" "CoreKeyboard" EndSection Section "Files" FontPath "unix/:-1" EndSection Section "Module" Load "dbe" Load "glx" Load "extmod" Load "type1" Load "freetype" SubSection "extmod" Option "omit xfree86-dga" EndSubSection EndSection Section "InputDevice" Identifier "ruwin_ct_sh" Driver "kbd" Option "XkbLayout" "us,ru" Option "XkbOptions" "grp:ctrl_shift_toggle" Option "XkbVariant" ",winkeys" EndSection Section "InputDevice" Identifier "mouse0" Driver "mouse" Option "Device" "/dev/input/mice" #"ImExPS/2 Logitech Wheel Mouse" Option "Protocol" "IMPS/2" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" Identifier "Samsung SyncMaster 510(M)s (CHA5807*)|0" DisplaySize 300 230 EndSection Section "Device" Identifier "NVIDIA GeForce (proprietary)|0" Driver "nvidia" EndSection Section "Screen" Identifier "Screen at Device0" Device "NVIDIA GeForce (proprietary)|0" Monitor "Samsung SyncMaster 510(M)s (CHA5807*)|0" DefaultDepth 24 Option "RenderAccel" "True" SubSection "Display" Depth 8 Modes "1024x768" "1024x736" "1024x600" "960x720" "848x480" "832x624" "800x600" "720x576" "640x480" EndSubSection SubSection "Display" Depth 15 Modes "1024x768" "1024x736" "1024x600" "960x720" "848x480" "832x624" "800x600" "720x576" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1024x768" "1024x736" "1024x600" "960x720" "848x480" "832x624" "800x600" "720x576" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1024x768" "1024x736" "1024x600" "960x720" "848x480" "832x624" "800x600" "720x576" "640x480" EndSubSection EndSection Как быть, куда смотреть? Что не так? P.S. Еще одно неприятное "качество" этого странного FX5200 - плохая подержка vesa, а точнее отсутствие ее на разрешениях выше 1024х768.. -- С уважением, Владимир Гусев
next reply other threads:[~2007-04-22 16:43 UTC|newest] Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top 2007-04-22 16:43 Владимир Гусев [this message] 2007-04-22 17:07 ` Владимир Гусев 2007-04-22 17:25 ` tneo 2007-04-22 17:38 ` Владимир Гусев 2007-04-23 4:51 ` Vladimir Pichugov 2007-04-23 7:38 ` Владимир Гусев 2007-04-23 17:11 ` [Comm] Nvidia Geforce FX5200 128 mb + ALC 3.0.4 [closed] Владимир Гусев 2007-04-23 17:47 ` Astakhov Andrey 2007-04-23 18:12 ` Владимир Гусев 2007-04-23 18:21 ` Astakhov Andrey 2007-04-23 20:30 ` Владимир Гусев 2007-04-23 20:37 ` Владимир Гусев 2007-04-24 10:20 ` Grigory Fateyev 2007-04-24 12:54 ` Владимир Гусев 2007-04-24 13:53 ` Grigory Fateyev 2007-04-24 15:40 ` Владимир Гусев 2007-04-24 17:02 ` Grigory Fateyev 2007-04-25 14:55 ` Grigory Fateyev 2007-04-24 16:54 ` Astakhov Andrey 2007-04-25 6:19 ` Владимир Гусев 2007-04-25 6:35 ` Astakhov Andrey 2007-04-25 10:15 ` Владимир Гусев 2007-04-25 15:14 ` Damir Shayhutdinov 2007-04-25 16:24 ` Astakhov Andrey
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=op.tq6129dzglg102@post.cnt.ru \ --to=vova1971@narod.ru \ --cc=community@lists.altlinux.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git