* [Comm] USB to IDE - как использовать? @ 2005-11-14 15:17 Olvin 2005-11-14 22:23 ` Ilya V. Pobelov 2005-11-14 23:07 ` Мерзляков Евгений Анатольевич 0 siblings, 2 replies; 10+ messages in thread From: Olvin @ 2005-11-14 15:17 UTC (permalink / raw) To: ALT Linux Community Купил AgeStar IUBCP USB to IDE переходник. Попробовал cdrom подключить, # dmesg [skip by Olvin] usb 1-1: new high speed USB device using ehci_hcd and address 4 SCSI subsystem initialized Initializing USB Mass Storage driver... scsi0 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning usbcore: registered new driver usb-storage USB Mass Storage support registered. usb-storage: device scan complete # tree /proc/scsi /proc/scsi |--usb-storage | `--0 |--device_info `--scsi # cat /proc/scsi/usb-storage/0 Host scsi0: usb-storage Vendor: Myson Century, Inc. Product: USB Mass Storage Device Serial Number: 100 Protocol: 8070i Transport: Bulk Quirks: # cat /proc/scsi/scsi Attached devices: # cat /proc/scsi/device_info 'Aashima' 'IMAGERY 2400SP' 0x1 'CHINON' 'CD-ROM CDS-431' 0x1 'CHINON' 'CD-ROM CDS-535' 0x1 [skip by Olvin] 'Zzyzx' 'RocketStor 500S' 0x40 'Zzyzx' 'RocketStor 2000' 0x40 # wc -l /proc/scsi/device_info 138 /proc/scsi/device_info И всё. Ни устройства в /dev, ни каталога в /media. Как использовать - не понятно. Может, с винчестером по-другому будет (позже проверю), но хотелось бы и cdrom'ы подключать (cd-rw). Что делать? Система: ALC3.0 (вернее Branch 3.0). ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Comm] USB to IDE - как использовать? 2005-11-14 15:17 [Comm] USB to IDE - как использовать? Olvin @ 2005-11-14 22:23 ` Ilya V. Pobelov 2005-11-15 7:11 ` Olvin 2005-11-14 23:07 ` Мерзляков Евгений Анатольевич 1 sibling, 1 reply; 10+ messages in thread From: Ilya V. Pobelov @ 2005-11-14 22:23 UTC (permalink / raw) To: ALT Linux Community Mon, Nov 14, 2005 at 05:17:15PM +0200, Olvin написал: > Купил AgeStar IUBCP USB to IDE переходник. Попробовал cdrom подключить, У меня есть подобный переходник, в ALM 2.4 всё работало, а под 3.0 пришлось отключить hal и udevd и запустить старый hotplug. > usb 1-1: new high speed USB device using ehci_hcd and address 4 > SCSI subsystem initialized > Initializing USB Mass Storage driver... > scsi0 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 4 > usb-storage: waiting for device to settle before scanning > usbcore: registered new driver usb-storage > USB Mass Storage support registered. Вот тут должно быть описание привода и под каким именем он появился в девайсах. > usb-storage: device scan complete С винчестером кстати абсолютно так же. -- With best regards, Ilya V. Pobelov ALT Linux Sisyphus (20050723) ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Comm] USB to IDE - как использовать? 2005-11-14 22:23 ` Ilya V. Pobelov @ 2005-11-15 7:11 ` Olvin 2005-11-15 10:28 ` Sergey Vlasov 0 siblings, 1 reply; 10+ messages in thread From: Olvin @ 2005-11-15 7:11 UTC (permalink / raw) To: ALT Linux Community Ilya V. Pobelov wrote: >>Купил AgeStar IUBCP USB to IDE переходник. Попробовал cdrom подключить, > У меня есть подобный переходник, в ALM 2.4 всё работало, а под 3.0 > пришлось отключить hal и udevd и запустить старый hotplug. А что - были проблемы? >>usb 1-1: new high speed USB device using ehci_hcd and address 4 >>SCSI subsystem initialized >>Initializing USB Mass Storage driver... >>scsi0 : SCSI emulation for USB Mass Storage devices >>usb-storage: device found at 4 >>usb-storage: waiting for device to settle before scanning >>usbcore: registered new driver usb-storage >>USB Mass Storage support registered. > Вот тут должно быть описание привода и под каким именем он появился в > девайсах. В девайсах он не появился (в /dev) >>usb-storage: device scan complete > С винчестером кстати абсолютно так же. С винчестером, как оказалось, всё в порядке. И на ALM2.4, и на ALC3.0. Затык только с CD-ROM/RW/DVD. Как я понял, в /proc/scsi/device_info - список ATAPI-устройств, которые поддерживаются этим переходником. Тех приводов, что я пробовал подключать, в этом списке нет, хотя на ALM2.4, привод, по крайней мере, появляется в устройствах и хотплаг создаёт записи в fstab и точки монтирования в /mnt. Даже обращаться пробовал. Пытается, пытается, а потом - отваливается. io error или что-то подобное... Причём точек монтирования 3 или 4. И, соответственно, устройств столько же. Например, sda0, sda1, sda2. Т.е. как партиции, хотя диск с одной дорожкой и одной сессией. ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Comm] USB to IDE - как использовать? 2005-11-15 7:11 ` Olvin @ 2005-11-15 10:28 ` Sergey Vlasov 2005-11-15 12:47 ` Olvin 0 siblings, 1 reply; 10+ messages in thread From: Sergey Vlasov @ 2005-11-15 10:28 UTC (permalink / raw) To: ALT Linux Community [-- Attachment #1: Type: text/plain, Size: 735 bytes --] On Tue, Nov 15, 2005 at 09:11:08AM +0200, Olvin wrote: > С винчестером, как оказалось, всё в порядке. И на ALM2.4, и на ALC3.0. > Затык только с CD-ROM/RW/DVD. Не все переходники USB-IDE могут работать с ATAPI-устройствами; у некоторых вариантов нет автоопределения типа устройства, но есть перемычка для включения режима ATAPI. Кстати, на CD-ROM перемычка стояла в положении Master? > Как я понял, в /proc/scsi/device_info - список ATAPI-устройств, которые > поддерживаются этим переходником. Нет - это список не совсем правильно работающих SCSI-устройств с флагами, включающими обход различных ошибок в реализации протоколов SCSI. К ситуации, когда устройство совсем не обнаруживается, это отношения не имеет. [-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --] ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Comm] USB to IDE - как использовать? 2005-11-15 10:28 ` Sergey Vlasov @ 2005-11-15 12:47 ` Olvin 2005-11-15 12:54 ` Eugene Ostapets 2005-11-15 13:14 ` Sergey Vlasov 0 siblings, 2 replies; 10+ messages in thread From: Olvin @ 2005-11-15 12:47 UTC (permalink / raw) To: ALT Linux Community Sergey Vlasov wrote: >>С винчестером, как оказалось, всё в порядке. И на ALM2.4, и на ALC3.0. >>Затык только с CD-ROM/RW/DVD. > Не все переходники USB-IDE могут работать с ATAPI-устройствами; у > некоторых вариантов нет автоопределения типа устройства, но есть перемычка > для включения режима ATAPI. А как гарантированно определить? :) > Кстати, на CD-ROM перемычка стояла в положении Master? Не помню. Это имеет значение? ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Comm] USB to IDE - как использовать? 2005-11-15 12:47 ` Olvin @ 2005-11-15 12:54 ` Eugene Ostapets 2005-11-15 13:14 ` Sergey Vlasov 1 sibling, 0 replies; 10+ messages in thread From: Eugene Ostapets @ 2005-11-15 12:54 UTC (permalink / raw) To: ALT Linux Community 15.11.05, Olvin<olvin rambler.ru> написал(а): > Sergey Vlasov wrote: > > Не все переходники USB-IDE могут работать с ATAPI-устройствами; у > > некоторых вариантов нет автоопределения типа устройства, но есть перемычка > > для включения режима ATAPI. > А как гарантированно определить? :) Методом научного тыка? :) > > > Кстати, на CD-ROM перемычка стояла в положении Master? > Не помню. Это имеет значение? Мой, например, не работает с устройствами в режиме Cable Select... до вывала usb подсистемы ядра... -- С уважением, Евгений Остапец uin: 23747217 jid: eugene_ostapets@jabber.ru ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Comm] USB to IDE - как использовать? 2005-11-15 12:47 ` Olvin 2005-11-15 12:54 ` Eugene Ostapets @ 2005-11-15 13:14 ` Sergey Vlasov 2005-11-16 6:00 ` Alex 1 sibling, 1 reply; 10+ messages in thread From: Sergey Vlasov @ 2005-11-15 13:14 UTC (permalink / raw) To: ALT Linux Community [-- Attachment #1: Type: text/plain, Size: 835 bytes --] On Tue, Nov 15, 2005 at 02:47:08PM +0200, Olvin wrote: > Sergey Vlasov wrote: > >>С винчестером, как оказалось, всё в порядке. И на ALM2.4, и на ALC3.0. > >>Затык только с CD-ROM/RW/DVD. > >Не все переходники USB-IDE могут работать с ATAPI-устройствами; у > >некоторых вариантов нет автоопределения типа устройства, но есть перемычка > >для включения режима ATAPI. > > А как гарантированно определить? :) Видимо, только брать проверенную модель (и даже тут нет гарантии, что производитель не выпустит "обновлённую" версию устройства с тем же названием, но на другом чипе). > >Кстати, на CD-ROM перемычка стояла в положении Master? > > Не помню. Это имеет значение? Вполне вероятно (и вообще Slave без Master-а по стандарту работать не обязан, хотя с обычными контроллерами IDE такой фокус зачастую проходит). [-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --] ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Comm] USB to IDE - как использовать? 2005-11-15 13:14 ` Sergey Vlasov @ 2005-11-16 6:00 ` Alex 2005-11-16 8:26 ` Alexander Volkov 0 siblings, 1 reply; 10+ messages in thread From: Alex @ 2005-11-16 6:00 UTC (permalink / raw) To: community On Tue, 15 Nov 2005 16:14:40 +0300 Sergey Vlasov <vsu@altlinux.ru> wrote: > > А как гарантированно определить? :) > > Видимо, только брать проверенную модель (и даже тут нет гарантии, что > производитель не выпустит "обновлённую" версию устройства с тем же > названием, но на другом чипе). Может быть кто-нибудь подскажет проверенную модель? А то как раз собрался брать такой переходник - на ноуте двд писать. ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Comm] USB to IDE - как использовать? 2005-11-16 6:00 ` Alex @ 2005-11-16 8:26 ` Alexander Volkov 0 siblings, 0 replies; 10+ messages in thread From: Alexander Volkov @ 2005-11-16 8:26 UTC (permalink / raw) To: ALT Linux Community On Wed, 16 Nov 2005 09:00:12 +0300, Alex wrote: > Может быть кто-нибудь подскажет проверенную модель? А то как раз > собрался брать > такой переходник - на ноуте двд писать. У нас работают на чипах genesys и ещё каких-то, все контейнеры - от vipower. -- Regards, Alexander. ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Comm] USB to IDE - как использовать? 2005-11-14 15:17 [Comm] USB to IDE - как использовать? Olvin 2005-11-14 22:23 ` Ilya V. Pobelov @ 2005-11-14 23:07 ` Мерзляков Евгений Анатольевич 1 sibling, 0 replies; 10+ messages in thread From: Мерзляков Евгений Анатольевич @ 2005-11-14 23:07 UTC (permalink / raw) To: ALT Linux Community попробуй обратиться к нему /dev/scd0 у меня ядро 2.6.11 скомпилено с поддержкой SCSI CDROM все работает ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2005-11-16 8:26 UTC | newest] Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2005-11-14 15:17 [Comm] USB to IDE - как использовать? Olvin 2005-11-14 22:23 ` Ilya V. Pobelov 2005-11-15 7:11 ` Olvin 2005-11-15 10:28 ` Sergey Vlasov 2005-11-15 12:47 ` Olvin 2005-11-15 12:54 ` Eugene Ostapets 2005-11-15 13:14 ` Sergey Vlasov 2005-11-16 6:00 ` Alex 2005-11-16 8:26 ` Alexander Volkov 2005-11-14 23:07 ` Мерзляков Евгений Анатольевич
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git