From: Ivan Petrov <pravo@hnet.ru>
To: community@lists.altlinux.org
Subject: Re: [Comm] eeepc liveflash
Date: Thu, 01 Jan 2009 23:03:36 +0600
Message-ID: <gjit0q$mgn$1@ger.gmane.org> (raw)
In-Reply-To: <200901011603.08294.mak@complife.ru>
Michael A. Kangin пишет:
> On Thursday 01 January 2009 12:58:26 Ivan Petrov wrote:
>
>> У меня wi-fi так и не заработал
>
> Что за чип,
Ralink
rt2860
/sbin/modprobe rt2860sta
[root@localhost tmp]# /sbin/service network restart
Computing interface groups: . 1 interfaces found
Processing /etc/net/vlantab: empty.
Stopping group 0/virtual (1 interfaces)
Stopping lo: .OK
Computing interface groups: . 1 interfaces found
Starting group 0/virtual (1 interfaces)
Starting lo: ....OK
Processing /etc/net/vlantab: empty.
> что говорит lspci -k,
# lspci -k
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory
Controller Hub (rev 03)
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME
Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME,
943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller (rev 02)
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 1 (rev 02)
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 2 (rev 02)
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 3 (rev 02)
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 4 (rev 02)
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #1 (rev 02)
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #2 (rev 02)
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #3 (rev 02)
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #4 (rev 02)
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller (rev 02)
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface
Bridge (rev 02)
Kernel modules: iTCO_wdt, intel-rng
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA
IDE Controller (rev 02)
Kernel driver in use: ata_piix
Kernel modules: ata_piix
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller
(rev 02)
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
01:00.0 Network controller: RaLink Device 0781
Kernel driver in use: rt2860
Kernel modules: rt2860sta
> dmesg?
<-- RTMPAllocTxRxRingMemory, Status=0
--> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
1. Phy Mode = 0
2. Phy Mode = 0
RTMPSetPhyMode: channel is out of range, use first channel=1
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== RTMPInitialize, Status=0
0x1300 = 00073200
NET: Registered protocol family 17
unionfs: new lower inode mtime (bindex=0, name=altlinux)
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 140
И.П.
next prev parent reply other threads:[~2009-01-01 17:03 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-27 12:22 ` [Comm] eeepc инструкция Alexey Rusakov
2008-12-27 14:09 ` Denis Kirienko
2008-12-27 15:13 ` Denis Kirienko
2008-12-27 15:38 ` Ivan Petrov
2008-12-27 17:28 ` [Comm] " Igor Zakhrebetkov
2008-12-27 17:52 ` [Comm] eeepc Ivan Petrov
2008-12-28 10:19 ` Michael A. Kangin
2008-12-28 14:00 ` Ivan Petrov
2008-12-28 15:14 ` Michael A. Kangin
2008-12-28 15:24 ` Ivan Petrov
2008-12-28 15:37 ` Michael A. Kangin
2008-12-28 15:46 ` Denis Kirienko
2008-12-29 4:06 ` Ivan Petrov
2008-12-29 16:15 ` [Comm] eeepc liveflash Michael A. Kangin
2008-12-30 6:59 ` Igor Zakhrebetkov
2008-12-30 8:31 ` Michael A. Kangin
2008-12-31 0:08 ` Alexey Rusakov
2009-01-01 9:58 ` Ivan Petrov
2009-01-01 13:03 ` Michael A. Kangin
2009-01-01 17:03 ` Ivan Petrov [this message]
2009-01-29 11:38 ` [Comm] eeepc liveflash - некоторые настройки Владимир Гусев
2009-02-08 9:18 ` Serge
2009-01-02 16:32 ` [Comm] eeepc liveflash Michael Shigorin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='gjit0q$mgn$1@ger.gmane.org' \
--to=pravo@hnet.ru \
--cc=community@lists.altlinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git