* [Comm] nforce2 не работает udma
@ 2007-07-26 23:13 Michael Sotnikov
2007-07-27 1:29 ` Alexey Borovskoy
0 siblings, 1 reply; 3+ messages in thread
From: Michael Sotnikov @ 2007-07-26 23:13 UTC (permalink / raw)
To: community
Доброго!
Была машина на i815 заменилась материнка на nForce2 400.
звук/сеть интегрированые сразу выключил.
Все загрузилось и работает, но ide работает в PIO, о чем радостно
говорит при загрузке
возможно нужно модулю как-то намекнуть? или еще что?
--
# hdparm -d 1 /dev/hda
/dev/hda:
setting using_dma to 1 (on)
HDIO_SET_DMA failed: Operation not permitted
using_dma = 0 (off)
# lsmod | grep amd
amd74xx 17820 0 [permanent]
ide_core 127304 6
amd74xx,ide_cd,ide_disk,ide_generic,generic,piix
--
выдержки из dmesg:
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<...skipped...>
NFORCE2: IDE controller at PCI slot 0000:00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
NFORCE2: port 0x01f0 already claimed by ide0
NFORCE2: port 0x0170 already claimed by ide1
NFORCE2: neither IDE port enabled (BIOS)
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [Comm] nforce2 не работает udma
2007-07-26 23:13 [Comm] nforce2 не работает udma Michael Sotnikov
@ 2007-07-27 1:29 ` Alexey Borovskoy
2007-07-28 22:08 ` Michael Sotnikov
0 siblings, 1 reply; 3+ messages in thread
From: Alexey Borovskoy @ 2007-07-27 1:29 UTC (permalink / raw)
To: ALT Linux Community
[-- Attachment #1: Type: text/plain, Size: 410 bytes --]
* Пятница 27 июля 2007 Michael Sotnikov
> Доброго!
>
> Была машина на i815 заменилась материнка на nForce2 400.
> звук/сеть интегрированые сразу выключил.
> Все загрузилось и работает, но ide работает в PIO, о чем
> радостно говорит при загрузке
>
> возможно нужно модулю как-то намекнуть? или еще что?
initrd пересобрать?
--
Алексей.
GPG key fingerprint
949B BC0E 2C44 7528 4F63 2753 E37A 9E3F 11F3 BDE1
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [Comm] nforce2 не работает udma
2007-07-27 1:29 ` Alexey Borovskoy
@ 2007-07-28 22:08 ` Michael Sotnikov
0 siblings, 0 replies; 3+ messages in thread
From: Michael Sotnikov @ 2007-07-28 22:08 UTC (permalink / raw)
To: community
Alexey Borovskoy пишет:
> * Пятница 27 июля 2007 Michael Sotnikov
>
>> Доброго!
>>
>> Была машина на i815 заменилась материнка на nForce2 400.
>> звук/сеть интегрированые сразу выключил.
>> Все загрузилось и работает, но ide работает в PIO, о чем
>> радостно говорит при загрузке
>>
>> возможно нужно модулю как-то намекнуть? или еще что?
>
> initrd пересобрать?
>
спасибо.
пересобирал с настройками по-умолчанию (это нормально?). вроде все работает.
>
> _______________________________________________
> Community mailing list
> Community@lists.altlinux.org
> https://lists.altlinux.org/mailman/listinfo/community
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2007-07-28 22:08 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-07-26 23:13 [Comm] nforce2 не работает udma Michael Sotnikov
2007-07-27 1:29 ` Alexey Borovskoy
2007-07-28 22:08 ` Michael Sotnikov
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git